rivet

view ChangeLog @ 6089:56141fa6804c

Use autoconf to select correct strerror_r implementation. Fixes zstr on OS X.
author David Grellscheid <david.grellscheid@durham.ac.uk>
date Mon, 16 Oct 2017 11:12:49 +0100
parents d5dcb0f016fe
children
line source
1 2017-10-09 Andy Buckley <andy.buckley@cern.ch>
3 * Embed zstr and enable transparent reading of gzipped HepMC streams.
5 2017-10-03 Andy Buckley <andy.buckley@cern.ch>
7 * Use Lester MT2 bisection header, and expose a few more mT2 function signatures.
9 2017-09-26 Andy Buckley <andy.buckley@cern.ch>
11 * Use generic YODA read and write functions -- enables zipped yoda.gz output.
13 * Add ChargedLeptons enum and mode argument to ZFinder and WFinder
14 constructors, to allow control over whether the selected charged
15 leptons are prompt. This is mostly cosmetic/for symmetry in the
16 case of ZFinder, since the same can be achieved by passing a
17 PromptFinalState as the fs argument, but for WFinder it's
18 essential since passing a prompt final state screws up the MET
19 calculation. Both are slightly different in the treatment of the
20 lepton dressing, although conventionally this is an area where
21 only prompt photons are used.
23 2017-09-25 Andy Buckley <andy.buckley@cern.ch>
25 * Add deltaR2 functions for squared distances.
27 2017-09-10 Andy Buckley <andy.buckley@cern.ch>
29 * Add white backgrounds to make-plots main and ratio plot frames.
31 2017-09-05 Andy Buckley <andy.buckley@cern.ch>
33 * Add CMS_2016_PAS_TOP_15_006 jet multiplicity in lepton+jets ttbar at 8 TeV analysis.
35 * Add CMS_2017_I1467451 Higgs -> WW -> emu + MET in 8 TeV pp analysis.
37 * Add ATLAS_2017_I1609448 Z->ll + pTmiss analysis.
39 * Add vectorMissingEt/Pt and vectorMET/MPT convenience methods to MissingMomentum.
41 * Add ATLAS_2017_I1598613 J/psi + mu analysis.
43 * Add CMS SUSY 0-lepton search CMS_2017_I1594909 (unofficial implementation, validated vs. published cutflows)
45 2017-09-04 Andy Buckley <andy.buckley@cern.ch>
47 * Change license explicitly to GPLv3, cf. MCnet3 agreement.
49 * Add a better jet smearing resolution parametrisation, based on GAMBIT code from Matthias Danninger.
51 2017-08-16 Andy Buckley <andy.buckley@cern.ch>
53 * Protect make-plots against NaNs in error band values (patch from Dmitry Kalinkin).
55 2017-07-20 Andy Buckley <andy.buckley@cern.ch>
57 * Add sumPt, sumP4, sumP3 utility functions.
59 * Record truth particles as constituents of SmearedParticles output.
61 * Rename UnstableFinalState -> UnstableParticles, and convert
62 ZFinder to be a general ParticleFinder rather than FinalState.
64 2017-07-19 Andy Buckley <andy.buckley@cern.ch>
66 * Add implicit cast from FourVector & FourMomentum to Vector3, and tweak mT implementation.
68 * Add rawParticles() to ParticleFinder, and update DressedLeptons, WFinder, ZFinder and VetoedFinalState to cope.
70 * Add isCharged() and isChargedLepton() to Particle.
72 * Add constituents() and rawConstituents() to Particle.
74 * Add support for specifying bin edges as braced initializer lists rather than explicit vector<double>.
76 2017-07-18 Andy Buckley <andy.buckley@cern.ch>
78 * Enable methods for booking of Histo2D and Profile2D from Scatter3D reference data.
80 * Remove IsRef annotation from autobooked histogram objects.
82 2017-07-17 Andy Buckley <andy.buckley@cern.ch>
84 * Add pair-smearing to SmearedJets.
86 2017-07-08 Andy Buckley <andy.buckley@cern.ch>
88 * Add Event::centrality(), for non-HepMC access to the generator
89 value if one has been recorded -- otherwise -1.
91 2017-06-28 Andy Buckley <andy.buckley@cern.ch>
93 * Split the smearing functions into separate header files for
94 generic/momentum, Particle, Jet, and experiment-specific smearings
95 & efficiencies.
97 2017-06-27 Andy Buckley <andy.buckley@cern.ch>
99 * Add 'JetFinder' alias for JetAlg, by analogy with ParticleFinder.
101 2017-06-26 Andy Buckley <andy.buckley@cern.ch>
103 * Convert SmearedParticles to a more general list of combined
104 efficiency+smearing functions, with extra constructors and some
105 variadic template cleverness to allow implicit conversions from
106 single-operation eff and smearing function. Yay for C++11 ;-)
107 This work based on a macro-based version of combined eff/smear
108 functions by Karl Nordstrom -- thanks!
110 * Add *EffFn, *SmearFn, and *EffSmearFn types to SmearingFunctions.hh.
112 2017-06-23 Andy Buckley <andy.buckley@cern.ch>
114 * Add portable OpenMP enabling flags to AM_CXXFLAGS.
116 2017-06-22 Andy Buckley <andy.buckley@cern.ch>
118 * Fix the smearing random number seed and make it thread-specific
119 if OpenMP is available (not yet in the build system).
121 * Remove the UNUSED macro and find an alternative solution for the
122 cases where it was used, since there was a risk of macro clashes
123 with embedding codes.
125 * Add a -o output directory option to make-plots.
127 * Vector4.hh: Add mT2(vec,vec) functions.
129 2017-06-21 Andy Buckley <andy.buckley@cern.ch>
131 * Add a full set of in-range kinematics functors: ptInRange,
132 (abs)etaInRange, (abs)phiInRange, deltaRInRange, deltaPhiInRange,
133 deltaEtaInRange, deltaRapInRange.
135 * Add a convenience JET_BTAG_EFFS functor with several constructors to handle mistag rates.
137 * Add const efficiency functors operating on Particle, Jet, and FourMomentum.
139 * Add const-efficiency constructor variants for SmearedParticles.
141 2017-06-21 Jon Butterworth <jmb@hep.ucl.ac.uk>
143 * Fix normalisations in CMS_2016_I1454211.
145 * Fix analysis name in ref histo paths for ATLAS_2017_I1591327.
147 2017-06-18 Andy Buckley <andy.buckley@cern.ch>
149 * Move all standard plugin files into subdirs of src/Analyses,
150 with some custom make rules driving rivet-buildplugin.
152 2017-06-18 David Grellscheid <david.grellscheid@durham.ac.uk>
154 * Parallelise rivet-buildplugin, with source-file cat'ing and use
155 of a temporary Makefile.
157 2016-06-18 Holger Schulz <holger.schulz@durham.ac.uk>
159 * Version 2.5.4 release!
161 2016-06-17 Holger Schulz <holger.schulz@durham.ac.uk>
163 * Fix 8 TeV DY (ATLAS_2016_I1467454), EL/MU bits were bissing.
165 * Add 13 TeV DY (ATLAS_2017_I1514251) and mark
166 ATLAS_2015_CONF_2015_041 obsolete
168 * Add missing install statement for ATLAS_2016_I1448301.yoda/plot/info leading to
169 segfault
171 2017-06-09 Andy Buckley <andy.buckley@cern.ch>
173 * Slight improvements to Particle constructors.
175 * Improvement to Beam projection: before falling back to barcodes
176 1 & 2, try a manual search for status=4 particles. Based on a
177 patch from Andrii Verbytskyi.
179 2017-06-05 Andy Buckley <andy.buckley@cern.ch>
181 * Add CMS_2016_I1430892: dilepton channel ttbar charge asymmetry analysis.
183 * Add CMS_2016_I1413748: dilepton channel ttbar spin correlations and polarisation analysis.
185 * Add CMS_2017_I1518399: leading jet mass for boosted top quarks at 8 TeV.
187 * Add convenience constructors for ChargedLeptons projection.
189 2017-06-03 Andy Buckley <andy.buckley@cern.ch>
191 * Add FinalState and Cut (optional) constructor arguments and
192 usage to DISFinalState. Thanks to Andrii Verbytskyi for the idea
193 and initial patch.
195 2017-05-23 Andy Buckley <andy.buckley@cern.ch>
197 * Add ATLAS_2016_I1448301, Z/gamma cross section measurement at 8 TeV.
199 * Add ATLAS_2016_I1426515, WW production at 8 TeV.
201 2016-05-19 Holger Schulz <holger.schulz@durham.ac.uk>
203 * Add BELLE measurement of semileptonic B0bar -> D*+ ell nu decays. I
204 took the liberty to correct the data in the sense that I take the bin
205 widhts into account in the normalisation. BELLE_2017_I1512299.
206 This is a nice analysis as it probes the hadronic and the leptonic
207 side of the decay so very valuable for model building and of course it
208 is rare as it is an unfolded B measurement.
210 2016-05-17 Holger Schulz <holger.schulz@durham.ac.uk>
212 * Add ALEPH measurement of hadronic tau decays, ALEPH_2014_I1267648.
214 * Add ALEPH dimuon invariant mass (OS and SS) analysis, ALEPH_2016_I1492968
216 * The latter needed GENKTEE FastJet algorithm so I added that FastJets
218 * Protection against logspace exception in histobooking of
219 MC_JetAnalysis
221 * Fix compiler complaints about uninitialised variable in OPAL_2004.
223 2016-05-16 Holger Schulz <holger.schulz@durham.ac.uk>
225 * Tidy ALEPH_1999 charm fragmentation analysis and normalise to data
226 integral. Added DSTARPLUS and DSTARMINUS to PID.
229 2017-05-16 Andy Buckley <andy.buckley@cern.ch>
231 * Add ATLAS_2016_CONF_2016_092, inclusive jet cross sections using early 13 TeV data.
233 * Add ATLAS_2017_I1591327, isolated diphoton + X differential cross-sections.
235 * Add ATLAS_2017_I1589844, ATLAS_2017_I1589844_EL, ATLAS_2017_I1589844_MU: kT splittings in Z events at 8 TeV.
237 * Add ATLAS_2017_I1509919, track-based underlying event at 13 TeV in ATLAS.
239 * Add ATLAS_2016_I1492320_2l2j and ATLAS_2016_I1492320_3l, the WWW cross-section at 8 TeV.
241 2017-05-12 Andy Buckley <andy.buckley@cern.ch>
243 * Add ATLAS_2016_I1449082, charge asymmetry in top quark pair production in dilepton channel.
245 * Add ATLAS_2015_I1394865, inclusive 4-lepton/ZZ lineshape.
247 2017-05-11 Andy Buckley <andy.buckley@cern.ch>
249 * Add ATLAS_2013_I1234228, high-mass Drell-Yan at 7 TeV.
251 2017-05-10 Andy Buckley <andy.buckley@cern.ch>
253 * Add CMS_2017_I1519995, search for new physics with dijet angular distributions in proton-proton collisions at sqrt{(s) = 13 TeV.
255 * Add CMS_2017_I1511284, inclusive energy spectrum in the very forward direction in proton-proton collisions at 13 TeV.
257 * Add CMS_2016_I1486238, studies of 2 b-jet + 2 jet production in proton-proton collisions at 7 TeV.
259 * Add CMS_2016_I1454211, boosted ttbar in pp collisions at sqrtS = 8 TeV.
261 * Add CMS_2016_I1421646, CMS azimuthal decorrelations at 8 TeV.
263 2017-05-09 Andy Buckley <andy.buckley@cern.ch>
265 * Add CMS_2015_I1380605, per-event yield of the highest transverse
266 momentum charged particle and charged-particle jet.
268 * Add CMS_2015_I1370682_PARTON, a partonic-top version of the CMS
269 7 TeV pseudotop ttbar differential cross-section analysis.
271 * Adding EHS_1988_I265504 from Felix Riehn: charged-particle
272 production in K+ p, pi+ p and pp interactions at 250 GeV/c.
274 * Fix ALICE_2012_I1116147 for pi0 and Lambda feed-down.
276 2017-05-08 Andy Buckley <andy.buckley@cern.ch>
278 * Add protection against leptons from QED FSR photon conversions
279 in assigning PartonicTop decay modes. Thanks to Markus Seidel for
280 the report and suggested fix.
282 * Reimplement FastJets methods in terms of new static helper functions.
284 * Add new mkClusterInputs, mkJet and mkJets static methods to
285 FastJets, to help with direct calls to FastJet where particle
286 lookup for constituents and ghost tags are required.
288 * Fix Doxygen config and Makefile target to allow working with
289 out-of-source builds. Thanks to Christian Holm Christensen.
291 * Improve DISLepton for HERA analyses: thanks to Andrii Verbytskyi for the patch!
293 2017-03-30 Andy Buckley <andy.buckley@cern.ch>
295 * Replace non-template Analysis::refData functions with C++11 default T=Scatter2D.
297 2017-03-29 Andy Buckley <andy.buckley@cern.ch>
299 * Allow yes/no and true/false values for LogX, etc. plot options.
301 * Add --errs as an alias for --mc-errs to rivet-mkhtml and rivet-cmphistos.
303 2017-03-08 Peter Richardson <peter.richardson@durham.ac.uk>
305 * Added 6 analyses AMY_1990_I295160, HRS_1986_I18502, JADE_1983_I190818,
306 PLUTO_1980_I154270, TASSO_1989_I277658, TPC_1987_I235694 for charged multiplicity
307 in e+e- at CMS energies below the Z pole
309 * Added 2 analyses for charged multiplicity at the Z pole DELPHI_1991_I301657,
310 OPAL_1992_I321190
312 * Updated ALEPH_1991_S2435284 to plot the average charged multiplcity
314 * Added analyses OPAL_2004_I631361, OPAL_2004_I631361_qq, OPAL_2004_I648738 for
315 gluon jets in e+e-, most need fictitious e+e- > g g process
317 2017-03-29 Andy Buckley <andy.buckley@cern.ch>
319 * Add Cut and functor selection args to HeavyHadrons accessor methods.
321 2017-03-03 Andy Buckley <andy.buckley@cern.ch>
323 * bin/rivet-mkanalysis: Add FastJets.hh include by default -- it's almost always used.
325 2017-03-02 Andy Buckley <andy.buckley@cern.ch>
327 * src/Analyses/CMS_2016_I1473674.cc: Patch from CMS to use partonic tops.
329 * src/Analyses/CMS_2015_I1370682.cc: Patch to inline jet finding from CMS.
331 2017-03-01 Andy Buckley <andy.buckley@cern.ch>
333 * Convert DressedLeptons use of fromDecay to instead veto photons
334 that match fromHadron() || fromHadronicTau() -- meaning that
335 electrons and muons from leptonic taus will now be dressed.
337 * Move Particle and Jet std::function aliases to .fhh files, and
338 replace many uses of templates for functor arguments with
339 ParticleSelector meta-types instead.
341 * Move the canonical implementations of hasAncestorWith, etc. and
342 isLastWith, etc. from ParticleUtils.hh into Particle.
344 * Disable the event-to-event beam consistency check if the
345 ignore-beams mode is active.
347 2017-02-27 Andy Buckley <andy.buckley@cern.ch>
349 * Add BoolParticleAND, BoolJetOR, etc. functor combiners to
350 Tools/ParticleUtils.hh and Tools/JetUtils.hh.
352 2017-02-24 Andy Buckley <andy.buckley@cern.ch>
354 * Mark ATLAS_2016_CONF_2016_078 and CMS_2016_PAS_SUS_16_14
355 analyses as validated, since their cutflows match the documentation.
357 2017-02-22 Andy Buckley <andy.buckley@cern.ch>
359 * Add aggregate signal regions to CMS_2016_PAS_SUS_16_14.
361 2017-02-18 Andy Buckley <andy.buckley@cern.ch>
363 * Add getEnvParam function, for neater use of environment variable
364 parameters with a required default.
366 2017-02-05 Andy Buckley <andy.buckley@cern.ch>
368 * Add HasBTag and HasCTag jet functors, with lower-case aliases.
370 2017-01-18 Andy Buckley <andy.buckley@cern.ch>
372 * Use std::function in functor-expanded method signatures on JetAlg.
374 2017-01-16 Andy Buckley <andy.buckley@cern.ch>
376 * Convert FinalState particles() accessors to use std::function
377 rather than a template arg for sorting, and add filtering functor
378 support -- including a mix of filtering and sorting functors. Yay
379 for C++11!
381 * Add ParticleEffFilter and JetEffFilter constructors from a double (encoding constant efficiency).
383 * Add Vector3::abseta()
385 2016-12-13 Andy Buckley <andy.buckley@cern.ch>
387 * Version 2.5.3 release.
389 2016-12-12 Holger Schulz <holger.schulz@cern.ch>
391 * Add cut in BZ calculation in OPAL 4 jet analysis. Paper is not clear
392 about treatment of parallel vectors, leads to division by zero and
393 nan-fill and subsequent YODA RangeError (OPAL_2001_S4553896)
395 2016-12-12 Andy Buckley <andy.buckley@cern.ch>
397 * Fix bugs in SmearedJets treatment of b & c tagging rates.
399 * Adding ATLAS_2016_I1467454 analysis (high-mass Drell-Yan at 8 TeV)
401 * Tweak to 'convert' call to improve the thumbnail quality from rivet-mkhtml/make-plots.
403 2016-12-07 Andy Buckley <andy.buckley@cern.ch>
405 * Require Cython 0.24 or later.
407 2016-12-02 Andy Buckley <andy.buckley@cern.ch>
409 * Adding L3_2004_I652683 (LEP 1 & 2 event shapes) and
410 LHCB_2014_I1262703 (Z+jet at 7 TeV).
412 * Adding leading dijet mass plots to MC_JetAnalysis (and all
413 derived classes). Thanks to Chris Gutschow!
415 * Adding CMS_2012_I1298807 (ZZ cross-section at 8 TeV),
416 CMS_2016_I1459051 (inclusive jet cross-sections at 13 TeV) and
417 CMS_PAS_FSQ_12_020 (preliminary 7 TeV leading-track underlying
418 event).
420 * Adding CDF_2015_1388868 (ppbar underlying event at 300, 900, and 1960 GeV)
422 * Adding ATLAS_2016_I1467230 (13 TeV min bias),
423 ATLAS_2016_I1468167 (13 TeV inelastic pp cross-section), and
424 ATLAS_2016_I1479760 (7 TeV pp double-parton scattering with 4
425 jets).
427 2016-12-01 Andy Buckley <andy.buckley@cern.ch>
429 * Adding ALICE_2012_I1116147 (eta and pi0 pTs and ratio) and
430 ATLAS_2011_I929691 (7 TeV jet frag)
432 2016-11-30 Andy Buckley <andy.buckley@cern.ch>
434 * Fix bash bugs in rivet-buildplugin, including fixing the --cmd mode.
436 2016-11-28 Andy Buckley <andy.buckley@cern.ch>
438 * Add LHC Run 2 BSM analyses ATLAS_2016_CONF_2016_037 (3-lepton
439 and same-sign 2-lepton), ATLAS_2016_CONF_2016_054 (1-lepton +
440 jets), ATLAS_2016_CONF_2016_078 (ICHEP jets + MET),
441 ATLAS_2016_CONF_2016_094 (1-lepton + many jets), CMS_2013_I1223519
442 (alphaT + b-jets), and CMS_2016_PAS_SUS_16_14 (jets + MET).
444 * Provide convenience reversed-argument versions of apply and
445 declare methods, to allow presentational choice of declare syntax
446 in situations where the projection argument is very long, and
447 reduce requirements on the user's memory since this is one
448 situation in Rivet where there is no 'most natural' ordering
449 choice.
451 2016-11-24 Andy Buckley <andy.buckley@cern.ch>
453 * Adding pTvec() function to 4-vectors and ParticleBase.
455 * Fix --pwd option of the rivet script
457 2016-11-21 Andy Buckley <andy.buckley@cern.ch>
459 * Add weights and scaling to Cutflow/s.
461 2016-11-19 Andy Buckley <andy.buckley@cern.ch>
463 * Add Et(const ParticleBase&) unbound function.
465 2016-11-18 Andy Buckley <andy.buckley@cern.ch>
467 * Fix missing YAML quote mark in rivet-mkanalysis.
469 2016-11-15 Andy Buckley <andy.buckley@cern.ch>
471 * Fix constness requirements on ifilter_select() and Particle/JetEffFilter::operator().
473 * src/Analyses/ATLAS_2016_I1458270.cc: Fix inverted particle efficiency filtering.
475 2016-10-24 Andy Buckley <andy.buckley@cern.ch>
477 * Add rough ATLAS and CMS photon reco efficiency functions from
478 Delphes (ATLAS and CMS versions are identical, hmmm)
480 2016-10-12 Andy Buckley <andy.buckley@cern.ch>
482 * Tidying/fixing make-plots custom z-ticks code. Thanks to Dmitry Kalinkin.
484 2016-10-03 Holger Schulz <holger.schulz@cern.ch>
486 * Fix SpiresID -> InspireID in some analyses (show-analysis pointed to
487 non-existing web page)
489 2016-09-29 Holger Schulz <holger.schulz@cern.ch>
491 * Add Luminosity_fb to AnalysisInfo
493 * Added some keywords and Lumi to ATLAS_2016_I1458270
495 2016-09-28 Andy Buckley <andy.buckley@cern.ch>
497 * Merge the ATLAS and CMS from-Delphes electron and muon tracking
498 efficiency functions into generic trkeff functions -- this is how
499 it should be.
501 * Fix return type typo in Jet::bTagged(FN) templated method.
503 * Add eta and pT cuts to ATLAS truth b-jet definition.
505 * Use rounding rather than truncation in Cutflow percentage efficiency printing.
507 2016-09-28 Frank Siegert <frank.siegert@cern.ch>
509 * make-plots bugfix in y-axis labels for RatioPlotMode=deviation
511 2016-09-27 Andy Buckley <andy.buckley@cern.ch>
513 * Add vector and scalar pT (rather than Et) to MissingMomentum.
515 2016-09-27 Holger Schulz <holger.schulz@cern.ch>
517 * Analysis keyword machinery
519 * rivet -a @semileptonic
521 * rivet -a @semileptonic@^bdecays -a @semileptonic@^ddecays
523 2016-09-22 Holger Schulz <holger.schulz@cern.ch>
525 * Release version 2.5.2
527 2016-09-21 Andy Buckley <andy.buckley@cern.ch>
529 * Add a requirement to DressedLeptons that the FinalState passed
530 as 'bareleptons' will be filtered to only contain charged leptons,
531 if that is not already the case. Thanks to Markus Seidel for the
532 suggestion.
534 2016-09-21 Holger Schulz <holger.schulz@cern.ch>
536 * Add Simone Amoroso's plugin for hadron spectra (ALEPH_1995_I382179)
538 * Add Simone Amoroso's plugin for hadron spectra (OPAL_1993_I342766)
540 2016-09-20 Holger Schulz <holger.schulz@cern.ch>
542 * Add CMS ttbar analysis from contrib, mark validated (CMS_2016_I1473674)
544 * Extend rivet-mkhtml --booklet to also work with pdfmerge
546 2016-09-20 Andy Buckley <andy.buckley@cern.ch>
548 * Fix make-plots automatic YMax calculation, which had a typo from code cleaning (mea culpa!).
550 * Fix ChargedLeptons projection, which failed to exclude neutrinos!!! Thanks to Markus Seidel.
552 * Add templated FN filtering arg versions of the Jet::*Tags() and
553 Jet::*Tagged() functions.
555 2016-09-18 Andy Buckley <andy.buckley@cern.ch>
557 * Add CMS partonic top analysis (CMS_2015_I1397174)
559 2016-09-18 Holger Schulz <holger.schulz@cern.ch>
561 * Add L3 xp analysis of eta mesons, thanks Simone (L3_1992_I336180)
563 * Add D0 1.8 TeV jet shapes analysis, thanks Simone (D0_1995_I398175)
565 2016-09-17 Andy Buckley <andy.buckley@cern.ch>
567 * Add has{Ancestor,Parent,Child,Descendant}With functions and
568 HasParticle{Ancestor,Parent,Child,Descendant}With functors.
570 2016-09-16 Holger Schulz <holger.schulz@cern.ch>
572 * Add ATLAS 8TeV ttbar analysis from contrib (ATLAS_2015_I1404878)
574 2016-09-16 Andy Buckley <andy.buckley@cern.ch>
576 * Add particles(GenParticlePtr) to RivetHepMC.hh
578 * Add hasParent, hasParentWith, and hasAncestorWith to Particle.
580 2016-09-15 Holger Schulz <holger.schulz@cern.ch>
582 * Add ATLAS 8TeV dijet analysis from contrib (ATLAS_2015_I1393758)
584 * Add ATLAS 8TeV 'number of tracks in jets' analysis from contrib (ATLAS_2016_I1419070)
586 * Add ATLAS 8TeV g->H->WW->enumunu analysis from contrib (ATLAS_2016_I1444991)
588 2016-09-14 Holger Schulz <holger.schulz@cern.ch>
590 * Explicit std::toupper and std::tolower to make clang happy
592 2016-09-14 Andy Buckley <andy.buckley@cern.ch>
594 * Add ATLAS Run 2 0-lepton SUSY and monojet search papers (ATLAS_2016_I1452559, ATLAS_2016_I1458270)
596 2016-09-13 Andy Buckley <andy.buckley@cern.ch>
598 * Add experimental Cutflow and Cutflows objects for BSM cut tracking.
600 * Add 'direct' versions of any, all, none to Utils.hh, with an
601 implicity bool() transforming function.
603 2016-09-13 Holger Schulz <holger.schulz@cern.ch>
605 * Add and mark validated B+ to omega analysis (BABAR_2013_I1116411)
607 * Add and mark validated D0 to pi- analysis (BABAR_2015_I1334693)
609 * Add a few more particle names and use PID names in recently added
610 analyses
612 * Add Simone's OPAL b-frag analysis (OPAL_2003_I599181) after some
613 cleanup and heavy usage of new features
615 * Restructured DELPHI_2011_I890503 in the same manner --- picks up
616 a few more B-hadrons now (e.g. 20523 and such)
618 * Clean up and add ATLAS 8TeV MinBias (from contrib ATLAS_2016_I1426695)
620 2016-09-12 Andy Buckley <andy.buckley@cern.ch>
622 * Add a static constexpr DBL_NAN to Utils.hh for convenience, and
623 move some utils stuff out of MathHeader.hh
625 2016-09-12 Holger Schulz <holger.schulz@cern.ch>
627 * Add count function to Tools/Utils.h
629 * Add and mark validated B0bar and Bminus-decay to pi analysis (BELLE_2013_I1238273)
631 * Add and mark validated B0-decay analysis (BELLE_2011_I878990)
633 * Add and mark validated B to D decay analysis (BELLE_2011_I878990)
635 2016-09-08 Andy Buckley <andy.buckley@cern.ch>
637 * Add C-array version of multi-target Analysis::scale() and normalize(), and fix (semantic) constness.
639 * Add == and != operators for cuts applied to integers.
641 * Add missing delta{Phi,Eta,Rap}{Gtr,Less} functors to ParticleBaseUtils.hh
643 2016-09-07 Andy Buckley <andy.buckley@cern.ch>
645 * Add templated functor filtering args to the Particle parent/child/descendent methods.
647 2016-09-06 Andy Buckley <andy.buckley@cern.ch>
649 * Add ATLAS Run 1 medium and tight electron ID efficiency functions.
651 * Update configure scripts to use newer (Py3-safe) Python testing macros.
653 2016-09-02 Andy Buckley <andy.buckley@cern.ch>
655 * Add isFirstWith(out), isLastWith(out) functions, and functor
656 wrappers, using Cut and templated function/functor args.
658 * Add Particle::parent() method.
660 * Add using import/typedef of HepMC *Ptr types (useful step for HepMC 2.07 and 3.00).
662 * Various typo fixes (and canonical renaming) in ParticleBaseUtils functor collection.
664 * Add ATLAS MV2c10 and MV2c20 b-tagging effs to SmearingFunctions.hh collection.
666 2016-09-01 Andy Buckley <andy.buckley@cern.ch>
668 * Add a PartonicTops projection.
670 * Add overloaded versions of the Event::allParticles() method with
671 selection Cut or templated selection function arguments.
673 2016-08-25 Andy Buckley <andy.buckley@cern.ch>
675 * Add rapidity scheme arg to DeltaR functor constructors.
677 2016-08-23 Andy Buckley <andy.buckley@cern.ch>
679 * Provide an Analysis::bookCounter(d,x,y, title) function, for
680 convenience and making the mkanalysis template valid.
682 * Improve container utils functions, and provide combined
683 remove_if+erase filter_* functions for both select- and
684 discard-type selector functions.
686 2016-08-22 Holger Schulz <holger.schulz@cern.ch>
688 * Bugfix in rivet-mkhtml (NoneType: ana.spiresID() --> spiresid)
690 * Added <numeric> include to Rivet/Tools/Utils.h to make gcc6 happy
692 2016-08-22 Andy Buckley <andy.buckley@cern.ch>
694 * Add efffilt() functions and Particle/JetEffFilt functors to SmearingFunctions.hh
696 2016-08-20 Andy Buckley <andy.buckley@cern.ch>
698 * Adding filterBy methods for Particle and Jet which accept
699 generic boolean functions as well as the Cut specialisation.
701 2016-08-18 Andy Buckley <andy.buckley@cern.ch>
703 * Add a Jet::particles(Cut&) method, for inline filtering of jet constituents.
705 * Add 'conjugate' behaviours to container head and tail functions
706 via negative length arg values.
708 2016-08-15 Andy Buckley <andy.buckley@cern.ch>
710 * Add convenience headers for including all final-state and
711 smearing projections, to save user typing.
713 2016-08-12 Andy Buckley <andy.buckley@cern.ch>
715 * Add standard MET functions for ATLAS R1 (and currently copies
716 for R2 and CMS).
718 * Add lots of vector/container helpers for e.g. container slicing,
719 summing, and min/max calculation.
721 * Adapt SmearedMET to take *two* arguments, since SET is typically
722 used to calculate MET resolution.
724 * Adding functors for computing vector & ParticleBase differences
725 w.r.t. another vector.
727 2016-08-12 Holger Schulz <holger.schulz@cern.ch>
729 * Implemented a few more cuts in prompt photon analysis
730 (CDF_1993_S2742446) but to no avail, the rise of the data towards
731 larger costheta values cannot be reproduced --- maybe this is a
732 candidate for more scrutiny and using the boosting machinery such that
733 the c.m. cuts can be done in a non-approximate way
735 2016-08-11 Holger Schulz <holger.schulz@cern.ch>
737 * Rename CDF_2009_S8383952 to CDF_2009_I856131 due to invalid Spires
738 entry.
740 * Add InspireID to all analysis known by their Spires key
742 2016-08-09 Holger Schulz <holger.schulz@cern.ch>
744 * Release 2.5.1
746 2016-08-08 Andy Buckley <andy.buckley@cern.ch>
748 * Add a simple MC_MET analysis for out-of-the-box MET distribution testing.
750 2016-08-08 Holger Schulz <holger.schulz@cern.ch>
752 * Add DELPHI_2011_I890503 b-quark fragmentation function measurement,
753 which superseded DELPHI_2002_069_CONF_603. The latter is marked
754 OBSOLETE.
756 2016-08-05 Holger Schulz <holger.schulz@cern.ch>
758 * Use Jet mass and energy smearing in CDF_1997_... six-jet analysis,
759 mark validated.
761 * Mark CDF_2001_S4563131 validated
763 * D0_1996_S3214044 --- cut on jet Et rather than pT, fix filling of
764 costheta and theta plots, mark validated. Concerning the jet
765 algorithm, I tried with the implementation of fastjet
766 fastjet/D0RunIConePlugin.hh but that really does not help.
768 * D0_1996_S3324664 --- fix normalisations, sorting jets properly now,
769 cleanup and mark validated.
772 2016-08-04 Holger Schulz <holger.schulz@cern.ch>
774 * Use Jet mass and energy smearing in CDF_1996_S310 ... jet properties
775 analysis. Cleanup analysis and mark validated. Added some more run info.
776 The same for CDF_1996_S334... (pretty much the same cuts, different
777 observables).
779 * Minor fixes in SmearedJets projection
781 2016-08-03 Andy Buckley <andy.buckley@cern.ch>
783 * Protect SmearedJets against loss of tagging information if a
784 momentum smearing function is used (rather than a dedicated Jet
785 smearing fn) via implicit casts.
787 2016-08-02 Andy Buckley <andy.buckley@cern.ch>
789 * Add SmearedMET projection, wrapping MissingMomentum.
791 * Include base truth-level projections in SmearedParticles/Jets compare() methods.
793 2016-07-29 Andy Buckley <andy.buckley@cern.ch>
795 * Rename TOTEM_2012_002 to proper TOTEM_2012_I1220862 name.
797 * Remove conditional building of obsolete, preliminary and
798 unvalidated analyses. Now always built, since there are sufficient
799 warnings.
801 2016-07-28 Holger Schulz <holger.schulz@cern.ch>
803 * Mark D0_2000... W pT analysis validated
805 * Mark LHCB_2011_S919... phi meson analysis validated
807 2016-07-25 Andy Buckley <andy.buckley@cern.ch>
809 * Add unbound accessors for momentum properties of ParticleBase objects.
811 * Add Rivet/Tools/ParticleBaseUtils.hh to collect tools like functors for particle & jet filtering.
813 * Add vector<ptr> versions of Analysis::scale() and ::normalize(), for batched scaling.
815 * Add Analysis::scale() and Analysis::divide() methods for Counter types.
817 * Utils.hh: add a generic sum() function for containers, and use auto in loop to support arrays.
819 * Set data path as well as lib path in scripts with --pwd option, and use abs path to $PWD.
821 * Add setAnalysisDataPaths and addAnalysisDataPath to RivetPaths.hh/cc and Python.
823 * Pass absolutized RIVET_DATA_PATH from rivet-mkhtml to rivet-cmphistos.
825 2016-07-24 Holger Schulz <holger.schulz@cern.ch>
827 * Mark CDF_2008_S77... b jet shapes validated
829 * Added protection against low stats yoda exception
830 in finalize for that analysis
832 2016-07-22 Andy Buckley <andy.buckley@cern.ch>
834 * Fix newly introduced bug in make-plots which led to data point
835 markers being skipped for all but the last bin.
837 2016-07-21 Andy Buckley <andy.buckley@cern.ch>
839 * Add pid, abspid, charge, abscharge, charge3, and abscharge3 Cut
840 enums, handled by Particle cut targets.
842 * Add abscharge() and abscharge3() methods to Particle.
844 * Add optional Cut and duplicate-removal flags to Particle children & descendants methods.
846 * Add unbound versions of Particle is* and from* methods, for easier functor use.
848 * Add Particle::isPrompt() as a member rather than unbound function.
850 * Add protections against -ve mass from numerical precision errors in smearing functions.
852 2016-07-20 Andy Buckley <andy.buckley@cern.ch>
854 * Move several internal system headers into the include/Rivet/Tools directory.
856 * Fix median-computing safety logic in ATLAS_2010_S8914702 and
857 tidy this and @todo markers in several similar analyses.
859 * Add to_str/toString and stream functions for Particle, and a bit
860 of Particle util function reorganisation.
862 * Add isStrange/Charm/Bottom PID and Particle functions.
864 * Add RangeError exception throwing from MathUtils.hh stats
865 functions if given empty/mismatched datasets.
867 * Add Rivet/Tools/PrettyPrint.hh, based on https://louisdx.github.io/cxx-prettyprint/
869 * Allow use of path regex group references in .plot file keyed values.
871 2016-07-20 Holger Schulz <holger.schulz@cern.ch>
873 * Fix the --nskip behaviour on the main rivet script.
875 2016-07-07 Andy Buckley <andy.buckley@cern.ch>
877 * Release version 2.5.0
879 2016-07-01 Andy Buckley <andy.buckley@cern.ch>
881 * Fix pandoc interface flag version detection.
883 2016-06-28 Andy Buckley <andy.buckley@cern.ch>
885 * Release version 2.4.3
887 * Add ATLAS_2016_I1468168 early ttbar fully leptonic fiducial
888 cross-section analysis at 13 TeV.
890 2016-06-21 Andy Buckley <andy.buckley@cern.ch>
892 * Add ATLAS_2016_I1457605 inclusive photon analysis at 8 TeV.
894 2016-06-15 Andy Buckley <andy.buckley@cern.ch>
896 * Add a --show-bibtex option to the rivet script, for convenient
897 outputting of a BibTeX db for the used analyses.
899 2016-06-14 Andy Buckley <andy.buckley@cern.ch>
901 * Add and rename 4-vector boost calculation methods: new methods
902 beta, betaVec, gamma & gammaVec are now preferred to the
903 deprecated boostVector method.
905 2016-06-13 Andy Buckley <andy.buckley@cern.ch>
907 * Add and use projection handling methods declare(proj, pname) and
908 apply<PROJ>(evt, pname) rather than the longer and explicitly
909 'projectiony' addProjection & applyProjection.
911 * Start using the DEFAULT_RIVET_ANALYSIS_CTOR macro (newly created
912 preferred alias to long-present DEFAULT_RIVET_ANA_CONSTRUCTOR)
914 * Add a DEFAULT_RIVET_PROJ_CLONE macro for implementing the
915 clone() method boiler-plate code in projections.
917 2016-06-10 Andy Buckley <andy.buckley@cern.ch>
919 * Add a NonPromptFinalState projection, and tweak the
920 PromptFinalState and unbound Particle functions a little in
921 response. May need some more finessing.
923 * Add user-facing aliases to ProjectionApplier add, get, and apply
924 methods... the templated versions of which can now be called
925 without using the word 'projection', which makes the function
926 names a bit shorter and pithier, and reduces semantic repetition.
928 2016-06-10 Andy Buckley <andy.buckley@cern.ch>
930 * Adding ATLAS_2015_I1397635 Wt at 8 TeV analysis.
932 * Adding ATLAS_2015_I1390114 tt+b(b) at 8 TeV analysis.
934 2016-06-09 Andy Buckley <andy.buckley@cern.ch>
936 * Downgrade some non-fatal error messages from ERROR to WARNING
937 status, because *sigh* ATLAS's software treats any appearance of
938 the word 'ERROR' in its log file as a reason to report the job as
939 failed (facepalm).
941 2016-06-07 Andy Buckley <andy.buckley@cern.ch>
943 * Adding ATLAS 13 TeV minimum bias analysis, ATLAS_2016_I1419652.
945 2016-05-30 Andy Buckley <andy.buckley@cern.ch>
947 * pyext/rivet/util.py: Add pandoc --wrap/--no-wrap CLI detection
948 and batch conversion.
950 * bin/rivet: add -o as a more standard 'output' option flag alias to -H.
952 2016-05-23 Andy Buckley <andy.buckley@cern.ch>
954 * Remove the last ref-data bin from table 16 of
955 ATLAS_2010_S8918562, due to data corruption. The corresponding
956 HepData record will be amended by ATLAS.
958 2016-05-12 Holger Schulz <holger.schulz@durham.ac.uk>
960 * Mark ATLAS_2012_I1082009 as validated after exhaustive tests with
961 Pythia8 and Sherpa in inclusive QCD mode.
963 2016-05-11 Andy Buckley <andy.buckley@cern.ch>
965 * Specialise return error codes from the rivet script.
967 2016-05-11 Andy Buckley <andy.buckley@cern.ch>
969 * Add Event::allParticles() to provide neater (but not *helpful*)
970 access to Rivet-wrapped versions of the raw particles in the
971 Event::genEvent() record, and hence reduce HepMC digging.
973 2016-05-05 Andy Buckley <andy.buckley@cern.ch>
975 * Version 2.4.2 release!
977 * Update SLD_2002_S4869273 ref data to match publication erratum,
978 now updated in HepData. Thanks to Peter Skands for the report and
979 Mike Whalley / Graeme Watt for the quick fix and heads-up.
981 2016-04-27 Andy Buckley <andy.buckley@cern.ch>
983 * Add CMS_2014_I1305624 event shapes analysis, with standalone
984 variable calculation struct embedded in an unnamed namespace.
986 2016-04-19 Andy Buckley <andy.buckley@cern.ch>
988 * Various clean-ups and fixes in ATLAS analyses using isolated
989 photons with median pT density correction.
991 2016-04-18 Andy Buckley <andy.buckley@cern.ch>
993 * Add transformBy(LT) methods to Particle and Jet.
995 * Add mkObjectTransform and mkFrameTransform factory methods to LorentzTransform.
997 2016-04-17 Andy Buckley <andy.buckley@cern.ch>
999 * Add null GenVertex protection in Particle children & descendants methods.
1001 2016-04-15 Andy Buckley <andy.buckley@cern.ch>
1003 * Add ATLAS_2015_I1397637, ATLAS 8 TeV boosted top cross-section vs. pT
1005 2016-04-14 Andy Buckley <andy.buckley@cern.ch>
1007 * Add a --no-histos argument to the rivet script.
1009 2016-04-13 Andy Buckley <andy.buckley@cern.ch>
1011 * Add ATLAS_2015_I1351916 (8 TeV Z FB asymmetry) and
1012 ATLAS_2015_I1408516 (8 TeV Z phi* and pT) analyses, and their _EL,
1013 _MU variants.
1015 2016-04-12 Andy Buckley <andy.buckley@cern.ch>
1017 * Patch PID utils for ordering issues in baryon decoding.
1019 2016-04-11 Andy Buckley <andy.buckley@cern.ch>
1021 * Actually implement ZEUS_2001_S4815815... only 10 years late!
1023 2016-04-08 Andy Buckley <andy.buckley@cern.ch>
1025 * Add a --guess-prefix flag to rivet-config, cf. fastjet-config.
1027 * Add RIVET_DATA_PATH variable and related functions in C++ and
1028 Python as a common first-fallback for RIVET_REF_PATH,
1029 RIVET_INFO_PATH, and RIVET_PLOT_PATH.
1031 * Add --pwd options to rivet-mkhtml and rivet-cmphistos
1033 2016-04-07 Andy Buckley <andy.buckley@cern.ch>
1035 * Remove implicit conventional event rotation for HERA -- this
1036 needs to be done explicitly from now.
1038 * Add comBoost functions and methods to Beam.hh, and tidy
1039 LorentzTransformation.
1041 * Restructure Beam projection functions for beam particle and
1042 sqrtS extraction, and add asqrtS functions.
1044 * Rename and improve PID and Particle Z,A,lambda functions ->
1045 nuclZ,nuclA,nuclNlambda.
1047 2016-04-05 Andy Buckley <andy.buckley@cern.ch>
1049 * Improve binIndex function, with an optional argument to allow
1050 overflow lookup, and add it to testMath.
1052 * Adding setPE, setPM, setPtEtaPhiM, etc. methods and
1053 corresponding mk* static methods to FourMomentum, as well as
1054 adding more convenience aliases and vector attributes for
1055 completeness. Coordinate conversion functions taken from
1056 HEPUtils::P4. New attrs also mapped to ParticleBase.
1058 2016-03-29 Andy Buckley <andy.buckley@cern.ch>
1060 * ALEPH_1996_S3196992.cc, ATLAS_2010_S8914702.cc,
1061 ATLAS_2011_I921594.cc, ATLAS_2011_S9120807.cc,
1062 ATLAS_2012_I1093738.cc, ATLAS_2012_I1199269.cc,
1063 ATLAS_2013_I1217867.cc, ATLAS_2013_I1244522.cc,
1064 ATLAS_2013_I1263495.cc, ATLAS_2014_I1307756.cc,
1065 ATLAS_2015_I1364361.cc, CDF_2008_S7540469.cc,
1066 CMS_2015_I1370682.cc, MC_JetSplittings.cc, STAR_2006_S6870392.cc:
1067 Updates for new FastJets interface, and other cleaning.
1069 * Deprecate 'standalone' FastJets constructors -- they are
1070 misleading.
1072 * More improvements around jets, including unbound conversion and
1073 filtering routines between collections of Particles, Jets, and
1074 PseudoJets.
1076 * Place 'Cut' forward declaration in a new Cuts.fhh header.
1078 * Adding a Cuts::OPEN extern const (a bit more standard- and
1079 constant-looking than Cuts::open())
1081 2016-03-28 Andy Buckley <andy.buckley@cern.ch>
1083 * Improvements to FastJets constructors, including specification
1084 of optional AreaDefinition as a constructor arg, disabling dodgy
1085 no-FS constructors which I suspect don't work properly in the
1086 brave new world of automatic ghost tagging, using a bit of
1087 judicious constructor delegation, and completing/exposing use of
1088 shared_ptr for internal memory management.
1090 2016-03-26 Andy Buckley <andy.buckley@cern.ch>
1092 * Remove Rivet/Tools/RivetBoost.hh and Boost references from
1093 rivet-config, rivet-buildplugin, and configure.ac. It's gone ;-)
1095 * Replace Boost assign usage with C++11 brace initialisers. All
1096 Boost use is gone from Rivet!
1098 * Replace Boost lexical_cast and string algorithms.
1100 2016-03-25 Andy Buckley <andy.buckley@cern.ch>
1102 * Bug-fix in semi-leptonic top selection of CMS_2015_I1370682.
1104 2016-03-12 Andy Buckley <andy.buckley@cern.ch>
1106 * Allow multi-line major tick labels on make-plots linear x and y
1107 axes. Linebreaks are indicated by \n in the .dat file.
1109 2016-03-09 Andy Buckley <andy.buckley@cern.ch>
1111 * Release 2.4.1
1113 2016-03-03 Andy Buckley <andy.buckley@cern.ch>
1115 * Add a --nskip flag to the rivet command-line tool, to allow
1116 processing to begin in the middle of an event file (useful for
1117 batched processing of large files, in combination with --nevts)
1119 2016-03-03 Holger Schulz <holger.schulz@durham.ac.uk>
1121 * Add ATLAS 7 TeV event shapes in Z+jets analysis (ATLAS_2016_I1424838)
1123 2016-02-29 Andy Buckley <andy.buckley@cern.ch>
1125 * Update make-plots to use multiprocessing rather than threading.
1127 * Add FastJets::trimJet method, thanks to James Monk for the
1128 suggestion and patch.
1130 * Add new preferred name PID::charge3 in place of
1131 PID::threeCharge, and also convenience PID::abscharge and
1132 PID::abscharge3 functions -- all derived from changes in external
1133 HEPUtils.
1135 * Add analyze(const GenEvent*) and analysis(string&) methods to
1136 AnalysisHandler, plus some docstring improvements.
1138 2016-02-23 Andy Buckley <andy.buckley@cern.ch>
1140 * New ATLAS_2015_I1394679 analysis.
1142 * New MC_HHJETS analysis from Andreas Papaefstathiou.
1144 * Ref data updates for ATLAS_2013_I1219109, ATLAS_2014_I1312627,
1145 and ATLAS_2014_I1319490.
1147 * Add automatic output paging to 'rivet --show-analyses'
1149 2016-02-16 Andy Buckley <andy.buckley@cern.ch>
1151 * Apply cross-section unit fixes and plot styling improvements to
1152 ATLAS_2013_I1217863 analyses, thanks to Christian Gutschow.
1154 * Fix to rivet-cmphistos to avoid overwriting RatioPlotYLabel if
1155 already set via e.g. the PLOT pseudo-file. Thanks to Johann Felix
1156 v. Soden-Fraunhofen.
1158 2016-02-15 Andy Buckley <andy.buckley@cern.ch>
1160 * Add Analysis::bookCounter and some machinery in rivet-cmphistos
1161 to avoid getting tripped up by unplottable (for now) data types.
1163 * Add --font and --format options to rivet-mkhtml and make-plots,
1164 to replace the individual flags used for that purpose. Not fully
1165 cleaned up, but a necessary step.
1167 * Add new plot styling options to rivet-cmphistos and
1168 rivet-mkhtml. Thanks to Gavin Hesketh.
1170 * Modify rivet-cmphistos and rivet-mkhtml to apply plot hiding if
1171 *any* path component is hidden by an underscore prefix, as
1172 implemented in AOPath, plus other tidying using new AOPath
1173 methods.
1175 * Add pyext/rivet/aopaths.py, containing AOPath object for central
1176 & standard decoding of Rivet-standard analysis object path
1177 structures.
1179 2016-02-12 Andy Buckley <andy.buckley@cern.ch>
1181 * Update ParticleIdUtils.hh (i.e. PID:: functions) to use the
1182 functions from the latest version of MCUtils' PIDUtils.h.
1184 2016-01-15 Andy Buckley <andy.buckley@cern.ch>
1186 * Change rivet-cmphistos path matching logic from match to search
1187 (user can add explicit ^ marker if they want match semantics).
1189 2015-12-20 Andy Buckley <andy.buckley@cern.ch>
1191 * Improve linspace (and hence also logspace) precision errors by
1192 using multiplication rather than repeated addition to build edge
1193 list (thanks to Holger Schulz for the suggestion).
1195 2015-12-15 Andy Buckley <andy.buckley@cern.ch>
1197 * Add cmphistos and make-plots machinery for handling 'suffix'
1198 variations on plot paths, currently just by plotting every line,
1199 with the variations in a 70% faded tint.
1201 * Add Beam::pv() method for finding the beam interaction primary
1202 vertex 4-position.
1204 * Add a new Particle::setMomentum(E,x,y,z) method, and an origin
1205 position member which is automatically populated from the
1206 GenParticle, with access methods corresponding to the momentum
1207 ones.
1209 2015-12-10 Andy Buckley <andy.buckley@cern.ch>
1211 * make-plots: improve custom tick attribute handling, allowing
1212 empty lists. Also, any whitespace now counts as a tick separator
1213 -- explicit whitespace in labels should be done via ~ or similar
1214 LaTeX markup.
1216 2015-12-04 Andy Buckley <andy.buckley@cern.ch>
1218 * Pro-actively use -m/-M arguments when initially loading
1219 histograms in mkhtml, *before* passing them to cmphistos.
1221 2015-12-03 Andy Buckley <andy.buckley@cern.ch>
1223 * Move contains() and has_key() functions on STL containers from std to Rivet namespaces.
1225 * Adding IsRef attributes to all YODA refdata files; this will be
1226 used to replace the /REF prefix in Rivet v3 onwards. The migration
1227 has also removed leading # characters from BEGIN/END blocks, as
1228 per YODA format evolution: new YODA versions as required by
1229 current Rivet releases are able to read both the old and new
1230 formats.
1232 2015-12-02 Andy Buckley <andy.buckley@cern.ch>
1234 * Add handling of a command-line PLOT 'file' argument to rivet-mkhtml, cf. rivet-cmphistos.
1236 * Improvements to rivet-mkhtml behaviour re. consistency with
1237 rivet-cmphistos in how muti-part histo paths are decomposed into
1238 analysis-name + histo name, and removal of 'NONE' strings.
1240 2015-11-30 Andy Buckley <andy.buckley@cern.ch>
1242 * Relax rivet/plotinfo.py pattern matching on .plot file
1243 components, to allow leading whitespace and around = signs, and to
1244 make the leading # optional on BEGIN/END blocks.
1246 2015-11-26 Andy Buckley <andy.buckley@cern.ch>
1248 * Write out intermediate histogram files by default, with event interval of 10k.
1250 2015-11-25 Andy Buckley <andy.buckley@cern.ch>
1252 * Protect make-plots against lock-up due to partial pstricks command when there are no data points.
1254 2015-11-17 Andy Buckley <andy.buckley@cern.ch>
1256 * rivet-cmphistos: Use a ratio label that doesn't mention 'data' when plotting MC vs. MC.
1258 2015-11-12 Andy Buckley <andy.buckley@cern.ch>
1260 * Tweak plot and subplot sizing defaults in make-plots so the
1261 total canvas is always the same size by default.
1263 2015-11-10 Andy Buckley <andy.buckley@cern.ch>
1265 * Handle 2D histograms better in rivet-cmphistos (since they can't be overlaid)
1267 2015-11-05 Andy Buckley <andy.buckley@cern.ch>
1269 * Allow comma-separated analysis name lists to be passed to a single -a/--analysis/--analyses option.
1271 * Convert namespace-global const variables to be static, to suppress compiler warnings.
1273 * Use standard MAX_DBL and MAX_INT macros as a source for MAXDOUBLE and MAXINT, to suppress GCC5 warnings.
1275 2015-11-04 Holger Schulz <holger.schulz@durham.ac.uk>
1277 * Adding LHCB inelastic xsection measurement (LHCB_2015_I1333223)
1279 * Adding ATLAS colour flow in ttbar->semileptonic measurement (ATLAS_2015_I1376945)
1281 2015-10-07 Chris Pollard <cpollard@cern.ch>
1283 * Release 2.4.0
1285 2015-10-06 Holger Schulz <holger.schulz@durham.ac.uk>
1287 * Adding CMS_2015_I1327224 dijet analysis (Mjj>2 TeV)
1289 2015-10-03 Holger Schulz <holger.schulz@durham.ac.uk>
1291 * Adding CMS_2015_I1346843 Z+gamma
1293 2015-09-30 Andy Buckley <andy.buckley@cern.ch>
1295 * Important improvement in FourVector & FourMomentum: new reverse()
1296 method to return a 4-vector in which only the spatial component
1297 has been inverted cf. operator- which flips the t/E component as
1298 well.
1300 2015-09-28 Holger Schulz <holger.schulz@durham.ac.uk>
1302 * Adding D0_2000_I503361 ZPT at 1800 GeV
1304 2015-09-29 Chris Pollard <cpollard@cern.ch>
1306 * Adding ATLAS_2015_CONF_2015_041
1308 2015-09-29 Chris Pollard <cpollard@cern.ch>
1310 * Adding ATLAS_2015_I1387176
1312 2015-09-29 Chris Pollard <cpollard@cern.ch>
1314 * Adding ATLAS_2014_I1327229
1316 2015-09-28 Chris Pollard <cpollard@cern.ch>
1318 * Adding ATLAS_2014_I1326641
1320 2015-09-28 Holger Schulz <holger.schulz@durham.ac.uk>
1322 * Adding CMS_2013_I1122847 FB assymetry in DY analysis
1324 2015-09-28 Andy Buckley <andy.buckley@cern.ch>
1326 * Adding CMS_2015_I1385107 LHA pp 2.76 TeV track-jet underlying event.
1328 2015-09-27 Andy Buckley <andy.buckley@cern.ch>
1330 * Adding CMS_2015_I1384119 LHC Run 2 minimum bias dN/deta with no B field.
1332 2015-09-25 Andy Buckley <andy.buckley@cern.ch>
1334 * Adding TOTEM_2014_I1328627 forward charged density in eta analysis.
1336 2015-09-23 Andy Buckley <andy.buckley@cern.ch>
1338 * Add CMS_2015_I1310737 Z+jets analysis.
1340 * Allow running MC_{W,Z}INC, MC_{W,Z}JETS as separate bare lepton
1341 analyses.
1343 2015-09-23 Andy Buckley <andy.buckley@cern.ch>
1345 * FastJets now allows use of FastJet pure ghosts, by excluding
1346 them from the constituents of Rivet Jet objects. Thanks to James
1347 Monk for raising the issue and providing a patch.
1349 2015-09-15 Andy Buckley <andy.buckley@cern.ch>
1351 * More MissingMomentum changes: add optional 'mass target'
1352 argument when retrieving the vector sum as a 4-momentum, with the
1353 mass defaulting to 0 rather than sqrt(sum(E)^2 - sum(p)^2).
1355 * Require Boost 1.55 for robust compilation, as pointed out by
1356 Andrii Verbytskyi.
1358 2015-09-10 Andy Buckley <andy.buckley@cern.ch>
1360 * Allow access to MissingMomentum projection via WFinder.
1362 * Adding extra methods to MissingMomentum, to make it more user-friendly.
1364 2015-09-09 Andy Buckley <andy.buckley@cern.ch>
1366 * Fix factor of 2 in LHCB_2013_I1218996 normalisation, thanks to
1367 Felix Riehn for the report.
1369 2015-08-20 Frank Siegert <frank.siegert@cern.ch>
1371 * Add function to ZFinder to retrieve all fiducial dressed
1372 leptons, e.g. to allow vetoing on a third one (proposed by
1373 Christian Gutschow).
1375 2015-08-18 Andy Buckley <andy.buckley@cern.ch>
1377 * Rename xs and counter AOs to start with underscores, and modify
1378 rivet-cmphistos to skip AOs whose basenames start with _.
1380 2015-08-17 Andy Buckley <andy.buckley@cern.ch>
1382 * Add writing out of cross-section and total event counter by
1383 default. Need to add some name protection to avoid them being
1384 plotted.
1386 2015-08-16 Andy Buckley <andy.buckley@cern.ch>
1388 * Add templated versions of Analysis::refData() to use data types
1389 other than Scatter2DPtr, and convert the cached ref data store to
1390 generic AnalysisObjectPtrs to make it possible.
1392 2015-07-29 Andy Buckley <andy.buckley@cern.ch>
1394 * Add optional Cut arguments to all the Jet tag methods.
1396 * Add exception handling and pre-emptive testing for a
1397 non-writeable output directory (based on patch from Lukas
1398 Heinrich).
1400 2015-07-24 Andy Buckley <andy.buckley@cern.ch>
1402 * Version 2.3.0 release.
1404 2015-07-02 Holger Schulz <holger.schulz@durham.ac.uk>
1406 * Tidy up ATLAS higgs combination analysis.
1407 * Add ALICE kaon, pion analysis (ALICE_2015_I1357424)
1408 * Add ALICE strange baryon analysis (ALICE_2014_I1300380)
1409 * Add CDF ZpT measurement in Z->ee events analysis (CDF_2012_I1124333)
1410 * Add validated ATLAS W+charm measurement (ATLAS_2014_I1282447)
1411 * Add validated CMS jet and dijet analysis (CMS_2013_I1208923)
1413 2015-07-01 Andy Buckley <andy.buckley@cern.ch>
1415 * Define a private virtual operator= on Projection, to block
1416 'sliced' accidental value copies of derived class instances.
1418 * Add new muon-in-jet options to FastJet constructors, pass that
1419 and invisibles enums correctly to JetAlg, tweak the default
1420 strategies, and add a FastJets constructor from a
1421 fastjet::JetDefinition (while deprecating the plugin-by-reference
1422 constructor).
1424 2015-07-01 Holger Schulz <holger.schulz@durham.ac.uk>
1426 * Add D0 phi* measurement (D0_2015_I1324946).
1428 * Remove WUD and MC_PHOTONJETUE analyses
1430 * Don't abort ATLAS_2015_I1364361 if there is no stable Higgs
1431 print a warning instead and veto event
1433 2015-07-01 Andy Buckley <andy.buckley@cern.ch>
1435 * Add all, none, from-decay muon filtering options to JetAlg and
1436 FastJets.
1438 * Rename NONPROMPT_INVISIBLES to DECAY_INVISIBLES for clarity &
1439 extensibility.
1441 * Remove FastJets::ySubJet, splitJet, and filterJet methods --
1442 they're BDRS-paper-specific and you can now use the FastJet
1443 objects directly to do this and much more.
1445 * Adding InvisiblesStrategy to JetAlg, using it rather than a bool
1446 in the useInvisibles method, and updating FastJets to use this
1447 approach for its particle filtering and to optionally use the enum
1448 in the constructor arguments. The new default invisibles-using
1449 behaviour is to still exclude _prompt_ invisibles, and the default
1450 is still to exclude them all. Only one analysis
1451 (src/Analyses/STAR_2006_S6870392.cc) required updating, since it
1452 was the only one to be using the FastJets legacy seed_threshold
1453 constructor argument.
1455 * Adding isVisible method to Particle, taken from
1456 VisibleFinalState (which now uses this).
1458 2015-06-30 Andy Buckley <andy.buckley@cern.ch>
1460 * Marking many old & superseded ATLAS analyses as obsolete.
1462 * Adding cmpMomByMass and cmpMomByAscMass sorting functors.
1464 * Bump version to 2.3.0 and require YODA > 1.4.0 (current head at
1465 time of development).
1466 2015-06-08 Andy Buckley <andy.buckley@cern.ch>
1468 * Add handling of -m/-M flags on rivet-cmphistos and rivet-mkhtml,
1469 moving current rivet-mkhtml -m/-M to -a/-A (for analysis name
1470 pattern matching). Requires YODA head (will be YODA 1.3.2 of
1471 1.4.0).
1473 * src/Analyses/ATLAS_2015_I1364361.cc: Now use the built-in prompt
1474 photon selecting functions.
1476 * Tweak legend positions in MC_JETS .plot file.
1478 * Add a bit more debug output from ZFinder and WFinder.
1480 2015-05-24 Holger Schulz <holger.schulz@durham.ac.uk>
1482 * Normalisation discussion concerning ATLAS_2014_I1325553
1483 is resolved. Changed YLabel accordingly.
1485 2015-05-19 Holger Schulz <holger.schulz@durham.ac.uk>
1487 * Add (preliminary) ATLAS combined Higgs analysis
1488 (ATLAS_2015_I1364361). Data will be updated and more
1489 histos added as soon as paper is published in journal.
1490 For now using data taken from public ressource
1491 https://atlas.web.cern.ch/Atlas/GROUPS/PHYSICS/PAPERS/HIGG-2014-11/
1493 2015-05-19 Peter Richardson <peter.richardson@durham.ac.uk>
1495 * Fix ATLAS_2014_I1325553 normalisation of histograms was wrong by
1496 factor of two |y| vs y problem
1498 2015-05-01 Andy Buckley <andy.buckley@cern.ch>
1500 * Fix MC_HJETS/HINC/HKTSPLITTINGS analyses to (ab)use the ZFinder
1501 with a mass range of 115-135 GeV and a mass target of 125 GeV (was
1502 previously 115-125 and mass target of mZ)
1504 2015-04-30 Andy Buckley <andy.buckley@cern.ch>
1506 * Removing uses of boost::assign::list_of, preferring the existing
1507 comma-based assign override for now, for C++11 compatibility.
1509 * Convert MC_Z* analysis finalize methods to use scale() rather than normalize().
1511 2015-04-01 Holger Schulz <holger.schulz@durham.ac.uk>
1513 * Add CMS 7 TeV rapidity gap analysis (CMS_2015_I1356998).
1515 * Remove FinalState Projection.
1517 2015-03-30 Holger Schulz <holger.schulz@durham.ac.uk>
1519 * Add ATLAS 7 TeV photon + jets analysis (ATLAS_2013_I1244522).
1521 2015-03-26 Andy Buckley <andy.buckley@cern.ch>
1523 * Updates for HepMC 2.07 interface constness improvements.
1525 2015-03-25 Holger Schulz <holger.schulz@durham.ac.uk>
1527 * Add ATLAS double parton scattering in W+2j analysis (ATLAS_2013_I1216670).
1529 2015-03-24 Andy Buckley <andy.buckley@cern.ch>
1531 * 2.2.1 release!
1533 2015-03-23 Holger Schulz <holger.schulz@durham.ac.uk>
1535 * Add ATLAS differential Higgs analysis (ATLAS_2014_I1306615).
1537 2015-03-19 Chris Pollard <cpollard@cern.ch>
1539 * Add ATLAS V+gamma analyses (ATLAS_2013_I1217863)
1541 2015-03-20 Andy Buckley <andy.buckley@cern.ch>
1543 * Adding ATLAS R-jets analysis i.e. ratios of W+jets and Z+jets
1544 observables (ATLAS_2014_I1312627 and _EL, _MU variants)
1546 * include/Rivet/Tools/ParticleUtils.hh: Adding same/oppSign and
1547 same/opp/diffCharge functions, operating on two Particles.
1549 * include/Rivet/Tools/ParticleUtils.hh: Adding HasAbsPID functor
1550 and removing optional abs arg from HasPID.
1552 2015-03-19 Andy Buckley <andy.buckley@cern.ch>
1554 * Mark ATLAS_2012_I1083318 as VALIDATED and fix d25-x01-y02 ref data.
1556 2015-03-19 Chris Pollard <cpollard@cern.ch>
1558 * Add ATLAS W and Z angular analyses (ATLAS_2011_I928289)
1560 2015-03-19 Andy Buckley <andy.buckley@cern.ch>
1562 * Add LHCb charged particle multiplicities and densities analysis (LHCB_2014_I1281685)
1564 * Add LHCb Z y and phi* analysis (LHCB_2012_I1208102)
1566 2015-03-19 Holger Schulz <holger.schulz@durham.ac.uk>
1568 * Add ATLAS dijet analysis (ATLAS_2014_I1325553).
1570 * Add ATLAS Z pT analysis (ATLAS_2014_I1300647).
1572 * Add ATLAS low-mass Drell-Yan analysis (ATLAS_2014_I1288706).
1574 * Add ATLAS gap fractions analysis (ATLAS_2014_I1307243).
1576 2015-03-18 Andy Buckley <andy.buckley@cern.ch>
1578 * Adding CMS_2014_I1298810 and CMS_2014_I1303894 analyses.
1580 2015-03-18 Holger Schulz <holger.schulz@durham.ac.uk>
1582 * Add PDG_TAUS analysis which makes use of the TauFinder.
1584 * Add ATLAS 'traditional' Underlying Event in Z->mumu analysis (ATLAS_2014_I1315949).
1586 2015-03-18 Andy Buckley <andy.buckley@cern.ch>
1588 * Change UnstableFinalState duplicate resolution to use the last
1589 in a chain rather than the first.
1591 2015-03-17 Holger Schulz <holger.schulz@durham.ac.uk>
1593 * Update Taufinder to use decaytyoe (can be HADRONIC, LEPTONIC or
1594 ANY), in FastJet.cc --- set TauFinder mode to hadronic for tau-tagging
1596 2015-03-16 Chris Pollard <cpollard@cern.ch>
1598 * Removed fuzzyEquals() from Vector3::angle()
1600 2015-03-16 Andy Buckley <andy.buckley@cern.ch>
1602 * Adding Cuts-based constructor to PrimaryHadrons.
1604 * Adding missing compare() method to HeavyHadrons projection.
1606 2015-03-15 Chris Pollard <cpollard@cern.ch>
1608 * Adding FinalPartons projection which selects the quarks and
1609 gluons immediately before hadronization
1611 2015-03-05 Andy Buckley <andy.buckley@cern.ch>
1613 * Adding Cuts-based constructors and other tidying in UnstableFinalState and HeavyHadrons
1615 2015-03-03 Andy Buckley <andy.buckley@cern.ch>
1617 * Add support for a PLOT meta-file argument to rivet-cmphistos.
1619 2015-02-27 Andy Buckley <andy.buckley@cern.ch>
1621 * Improved time reporting.
1623 2015-02-24 Andy Buckley <andy.buckley@cern.ch>
1625 * Add Particle::fromHadron and Particle::fromPromptTau, and add a
1626 boolean 'prompt' argument to Particle::fromTau.
1628 * Fix WFinder use-transverse-mass property setting. Thanks to Christian Gutschow.
1630 2015-02-04 Andy Buckley <andy.buckley@cern.ch>
1632 * Add more protection against math domain errors with log axes.
1634 * Add some protection against nan-valued points and error bars in make-plots.
1636 2015-02-03 Andy Buckley <andy.buckley@cern.ch>
1638 * Converting 'bitwise' to 'logical' Cuts combinations in all analyses.
1640 2015-02-02 Andy Buckley <andy.buckley@cern.ch>
1642 * Use vector MET rather than scalar VET (doh...) in WFinder
1643 cut. Thanks to Ines Ochoa for the bug report.
1645 * Updating and tidying analyses with deprecation warnings.
1647 * Adding more Cuts/FS constructors for Charged,Neutral,UnstableFinalState.
1649 * Add &&, || and ! operators for without-parens-warnings Cut
1650 combining. Note these don't short-circuit, but this is ok since
1651 Cut comparisons don't have side-effects.
1653 * Add absetaIn, absrapIn Cut range definitions.
1655 * Updating use of sorted particle/jet access methods and cmp
1656 functors in projections and analyses.
1658 2014-12-09 Andy Buckley <andy.buckley@cern.ch>
1660 * Adding a --cmd arg to rivet-buildplugin to allow the output
1661 paths to be sed'ed (to help deal with naive Grid
1662 distribution). For example BUILDROOT=`rivet-config --prefix`;
1663 rivet-buildplugin PHOTONS.cc --cmd | sed -e
1664 "s:$BUILDROOT:$SITEROOT:g"
1666 2014-11-26 Andy Buckley <andy.buckley@cern.ch>
1668 * Interface improvements in DressedLeptons constructor.
1670 * Adding DEPRECATED macro to throw compiler deprecation warnings when using deprecated features.
1672 2014-11-25 Andy Buckley <andy.buckley@cern.ch>
1674 * Adding Cut-based constructors, and various constructors with
1675 lists of PDG codes to IdentifiedFinalState.
1677 2014-11-20 Andy Buckley <andy.buckley@cern.ch>
1679 * Analysis updates (ATLAS, CMS, CDF, D0) to apply the changes below.
1681 * Adding JetAlg jets(Cut, Sorter) methods, and other interface
1682 improvements for cut and sorted ParticleBase retrieval from JetAlg
1683 and ParticleFinder projections. Some old many-doubles versions
1684 removed, syntactic sugar sorting methods deprecated.
1686 * Adding Cuts::Et and Cuts::ptIn, Cuts::etIn, Cuts::massIn.
1688 * Moving FastJet includes, conversions, uses etc. into Tools/RivetFastJet.hh
1690 2014-10-07 Andy Buckley <andy.buckley@cern.ch>
1692 * Fix a bug in the isCharmHadron(pid) function and remove isStrange* functions.
1694 2014-09-30 Andy Buckley <andy.buckley@cern.ch>
1696 * 2.2.0 release!
1698 * Mark Jet::containsBottom and Jet::containsCharm as deprecated
1699 methods: use the new methods. Analyses updated.
1701 * Add Jet::bTagged(), Jet::cTagged() and Jet::tauTagged() as
1702 ghost-assoc-based replacements for the 'contains' tagging methods.
1704 2014-09-17 Andy Buckley <andy.buckley@cern.ch>
1706 * Adding support for 1D and 3D YODA scatters, and helper methods
1707 for calling the efficiency, asymm and 2D histo divide functions.
1709 2014-09-12 Andy Buckley <andy.buckley@cern.ch>
1711 * Adding 5 new ATLAS analyses:
1712 ATLAS_2011_I921594: Inclusive isolated prompt photon analysis with full 2010 LHC data
1713 ATLAS_2013_I1263495: Inclusive isolated prompt photon analysis with 2011 LHC data
1714 ATLAS_2014_I1279489: Measurements of electroweak production of dijets + $Z$ boson, and distributions sensitive to vector boson fusion
1715 ATLAS_2014_I1282441: The differential production cross section of the $\phi(1020)$ meson in $\sqrt{s}=7$ TeV $pp$ collisions measured with the ATLAS detector
1716 ATLAS_2014_I1298811: Leading jet underlying event at 7 TeV in ATLAS
1718 * Adding a median(vector<NUM>) function and fixing the other stats
1719 functions to operate on vector<NUM> rather than vector<int>.
1721 2014-09-03 Andy Buckley <andy.buckley@cern.ch>
1723 * Fix wrong behaviour of LorentzTransform with a null boost vector
1724 -- thanks to Michael Grosse.
1726 2014-08-26 Andy Buckley <andy.buckley@cern.ch>
1728 * Add calc() methods to Hemispheres as requested, to allow it to
1729 be used with Jet or FourMomentum inputs outside the normal
1730 projection system.
1732 2014-08-17 Andy Buckley <andy.buckley@cern.ch>
1734 * Improvements to the particles methods on
1735 ParticleFinder/FinalState, in particular adding the range of cuts
1736 arguments cf. JetAlg (and tweaking the sorted jets equivalent) and
1737 returning as a copy rather than a reference if cut/sorted to avoid
1738 accidentally messing up the cached copy.
1740 * Creating ParticleFinder projection base class, and moving
1741 Particles-accessing methods from FinalState into it.
1743 * Adding basic forms of MC_ELECTRONS, MC_MUONS, and MC_TAUS
1744 analyses.
1746 2014-08-15 Andy Buckley <andy.buckley@cern.ch>
1748 * Version bump to 2.2.0beta1 for use at BOOST and MCnet school.
1750 2014-08-13 Andy Buckley <andy.buckley@cern.ch>
1752 * New analyses:
1753 ATLAS_2014_I1268975 (high mass dijet cross-section at 7 TeV)
1754 ATLAS_2014_I1304688 (jet multiplicity and pT at 7 TeV)
1755 ATLAS_2014_I1307756 (scalar diphoton resonance search at 8 TeV -- no histograms!)
1756 CMSTOTEM_2014_I1294140 (charged particle pseudorapidity at 8 TeV)
1758 2014-08-09 Andy Buckley <andy.buckley@cern.ch>
1760 * Adding PromptFinalState, based on code submitted by Alex
1761 Grohsjean and Will Bell. Thanks!
1763 2014-08-06 Andy Buckley <andy.buckley@cern.ch>
1765 * Adding MC_HFJETS and MC_JETTAGS analyses.
1767 2014-08-05 Andy Buckley <andy.buckley@cern.ch>
1769 * Update all analyses to use the xMin/Max/Mid, xMean, xWidth,
1770 etc. methods on YODA classes rather than the deprecated lowEdge
1771 etc.
1773 * Merge new HasPID functor from Holger Schulz into
1774 Rivet/Tools/ParticleUtils.hh, mainly for use with the any()
1775 function in Rivet/Tools/Utils.hh
1777 2014-08-04 Andy Buckley <andy.buckley@cern.ch>
1779 * Add ghost tagging of charms, bottoms and taus to FastJets, and
1780 tag info accessors to Jet.
1782 * Add constructors from and cast operators to FastJet's PseudoJet
1783 object from Particle and Jet.
1785 * Convert inRange to not use fuzzy comparisons on closed
1786 intervals, providing old version as fuzzyInRange.
1788 2014-07-30 Andy Buckley <andy.buckley@cern.ch>
1790 * Remove classifier functions accepting a Particle from the PID
1791 inner namespace.
1793 2014-07-29 Andy Buckley <andy.buckley@cern.ch>
1795 * MC_JetAnalysis.cc: re-enable +- ratios for eta and y, now that
1796 YODA divide doesn't throw an exception.
1798 * ATLAS_2012_I1093734: fix a loop index error which led to the
1799 first bin value being unfilled for half the dphi plots.
1801 * Fix accidental passing of a GenParticle pointer as a PID code
1802 int in HeavyHadrons.cc. Effect limited to incorrect deductions
1803 about excited HF decay chains and should be small. Thanks to
1804 Tomasz Przedzinski for finding and reporting the issue during
1805 HepMC3 design work!
1807 2014-07-23 Andy Buckley <andy.buckley@cern.ch>
1809 * Fix to logspace: make sure that start and end values are exact,
1810 not the result of exp(log(x)).
1812 2014-07-16 Andy Buckley <andy.buckley@cern.ch>
1814 * Fix setting of library paths for doc building: Python can't
1815 influence the dynamic loader in its own process by setting an
1816 environment variable because the loader only looks at the variable
1817 once, when it starts.
1819 2014-07-02 Andy Buckley <andy.buckley@cern.ch>
1821 * rivet-cmphistos now uses the generic yoda.read() function rather
1822 than readYODA() -- AIDA files can also be compared and plotted
1823 directly now.
1825 2014-06-24 Andy Buckley <andy.buckley@cern.ch>
1827 * Add stupid missing <string> include and std:: prefix in Rivet.hh
1829 2014-06-20 Holger Schulz <hschulz@physik.hu-berlin.de>
1831 * bin/make-plots: Automatic generation of minor xtick labels if LogX is requested
1832 but data resides e.g. in [200, 700]. Fixes m_12 plots of, e.g.
1833 ATLAS_2010_S8817804
1835 2014-06-17 David Grellscheid <David.Grellscheid@durham.ac.uk>
1837 * pyext/rivet/Makefile.am: 'make distcheck' and out-of-source
1838 builds should work now.
1840 2014-06-10 Andy Buckley <andy.buckley@cern.ch>
1842 * Fix use of the install command for bash completion installation on Macs.
1844 2014-06-07 Andy Buckley <andy.buckley@cern.ch>
1846 * Removing direct includes of MathUtils.hh and others from analysis code files.
1848 2014-06-02 Andy Buckley <andy.buckley@cern.ch>
1850 * Rivet 2.1.2 release!
1852 2014-05-30 Andy Buckley <andy.buckley@cern.ch>
1854 * Using Particle absrap(), abseta() and abspid() where automatic conversion was feasible.
1856 * Adding a few extra kinematics mappings to ParticleBase.
1858 * Adding p3() accessors to the 3-momentum on FourMomentum, Particle, and Jet.
1860 * Using Jet and Particle kinematics methods directly (without momentum()) where possible.
1862 * More tweaks to make-plots 2D histo parsing behaviour.
1864 2014-05-30 Holger Schulz <hschulz@physik.hu-berlin.de>
1866 * Actually fill the XQ 2D histo, .plot decorations.
1868 * Have make-plots produce colourmaps using YODA_3D_SCATTER
1869 objects. Remove the grid in colourmaps.
1871 * Some tweaks for the SFM analysis, trying to contact Martin Wunsch
1872 who did the unfolding back then.
1874 2014-05-29 Holger Schulz <hschulz@physik.hu-berlin.de>
1876 * Re-enable 2D histo in MC_PDFS
1878 2014-05-28 Andy Buckley <andy.buckley@cern.ch>
1880 * Updating analysis and project routines to use Particle::pid() by
1881 preference to Particle::pdgId(), and Particle::abspid() by
1882 preference to abs(Particle::pdgId()), etc.
1884 * Adding interfacing of smart pointer types and booking etc. for
1885 YODA 2D histograms and profiles.
1887 * Improving ParticleIdUtils and ParticleUtils functions based on
1888 merging of improved function collections from MCUtils, and
1889 dropping the compiled ParticleIdUtils.cc file.
1891 2014-05-27 Andy Buckley <andy.buckley@cern.ch>
1893 * Adding CMS_2012_I1090423 (dijet angular distributions),
1894 CMS_2013_I1256943 (Zbb xsec and angular correlations),
1895 CMS_2013_I1261026 (jet and UE properties vs. Nch) and
1896 D0_2000_I499943 (bbbar production xsec and angular correlations).
1898 2014-05-26 Andy Buckley <andy.buckley@cern.ch>
1900 * Fixing a bug in plot file handling, and adding a texpand()
1901 routine to rivet.util, to be used to expand some 'standard'
1902 physics TeX macros.
1904 * Adding ATLAS_2012_I1124167 (min bias event shapes),
1905 ATLAS_2012_I1203852 (ZZ cross-section), and ATLAS_2013_I1190187
1906 (WW cross-section) analyses.
1908 2014-05-16 Andy Buckley <andy.buckley@cern.ch>
1910 * Adding any(iterable, fn) and all(iterable, fn) template functions for convenience.
1912 2014-05-15 Holger Schulz <holger.schulz@cern.ch>
1914 * Fix some bugs in identified hadron PIDs in OPAL_1998_S3749908.
1916 2014-05-13 Andy Buckley <andy.buckley@cern.ch>
1918 * Writing out [UNVALIDATED], [PRELIMINARY], etc. in the
1919 --list-analyses output if analysis is not VALIDATED.
1921 2014-05-12 Andy Buckley <andy.buckley@cern.ch>
1923 * Adding CMS_2013_I1265659 colour coherence analysis.
1925 2014-05-07 Andy Buckley <andy.buckley@cern.ch>
1927 * Bug fixes in CMS_2013_I1209721 from Giulio Lenzi.
1929 * Fixing compiler warnings from clang, including one which
1930 indicated a misapplied cut bug in CDF_2006_S6653332.
1932 2014-05-05 Andy Buckley <andy.buckley@cern.ch>
1934 * Fix missing abs() in Particle::abspid()!!!!
1936 2014-04-14 Andy Buckley <andy.buckley@cern.ch>
1938 * Adding the namespace protection workaround for Boost described
1939 at http://www.boost.org/doc/libs/1_55_0/doc/html/foreach.html
1941 2014-04-13 Andy Buckley <andy.buckley@cern.ch>
1943 * Adding a rivet.pc template file and installation rule for pkg-config to use.
1945 * Updating data/refdata/ALEPH_2001_S4656318.yoda to corrected version in HepData.
1947 2014-03-27 Andy Buckley <andy.buckley@cern.ch>
1949 * Flattening PNG output of make-plots (i.e. no transparency) and other tweaks.
1951 2014-03-23 Andy Buckley <andy.buckley@cern.ch>
1953 * Renaming the internal meta-particle class in DressedLeptons (and
1954 exposed in the W/ZFinders) from ClusteredLepton to DressedLepton
1955 for consistency with the change in name of its containing class.
1957 * Removing need for cmake and unportable yaml-cpp trickery by
1958 using libtool to build an embedded symbol-mangled copy of yaml-cpp
1959 rather than trying to mangle and build direct from the tarball.
1961 2014-03-10 Andy Buckley <andy.buckley@cern.ch>
1963 * Rivet 2.1.1 release.
1965 2014-03-07 Andy Buckley <andy.buckley@cern.ch>
1967 * Adding ATLAS multilepton search (no ref data file), ATLAS_2012_I1204447.
1969 2014-03-05 Andy Buckley <andy.buckley@cern.ch>
1971 * Also renaming Breit-Wigner functions to cdfBW, invcdfBW and bwspace.
1973 * Renaming index_between() to the more Rivety binIndex(), since that's the only real use of such a function... plus a bit of SFINAE type relaxation trickery.
1975 2014-03-04 Andy Buckley <andy.buckley@cern.ch>
1977 * Adding programmatic access to final histograms via AnalysisHandler::getData().
1979 * Adding CMS 4 jet correlations analysis, CMS_2013_I1273574.
1981 * Adding CMS W + 2 jet double parton scattering analysis, CMS_2013_I1272853.
1983 * Adding ATLAS isolated diphoton measurement, ATLAS_2012_I1199269.
1985 * Improving the index_between function so the numeric types don't
1986 have to exactly match.
1988 * Adding better momentum comparison functors and sortBy, sortByX
1989 functions to use them easily on containers of Particle, Jet, and
1990 FourMomentum.
1992 2014-02-10 Andy Buckley <andy.buckley@cern.ch>
1994 * Removing duplicate and unused ParticleBase sorting functors.
1996 * Removing unused HT increment and units in ATLAS_2012_I1180197 (unvalidated SUSY).
1998 * Fixing photon isolation logic bug in CMS_2013_I1258128 (Z rapidity).
2000 * Replacing internal uses of #include Rivet/Rivet.hh with
2001 Rivet/Config/RivetCommon.hh, removing the MAXRAPIDITY const, and
2002 repurposing Rivet/Rivet.hh as a convenience include for external
2003 API users.
2005 * Adding isStable, children, allDescendants, stableDescendants,
2006 and flightLength functions to Particle.
2008 * Replacing Particle and Jet deltaX functions with generic ones on
2009 ParticleBase, and adding deltaRap variants.
2011 * Adding a Jet.fhh forward declaration header, including fastjet::PseudoJet.
2013 * Adding a RivetCommon.hh header to allow Rivet.hh to be used externally.
2015 * Fixing HeavyHadrons to apply pT cuts if specified.
2017 2014-02-06 Andy Buckley <andy.buckley@cern.ch>
2019 * 2.1.0 release!
2021 2014-02-05 Andy Buckley <andy.buckley@cern.ch>
2023 * Protect against invalid prefix value if the --prefix configure option is unused.
2025 2014-02-03 Andy Buckley <andy.buckley@cern.ch>
2027 * Adding the ATLAS_2012_I1093734 fwd-bwd / azimuthal minbias correlations analysis.
2029 * Adding the LHCB_2013_I1208105 forward energy flow analysis.
2031 2014-01-31 Andy Buckley <andy.buckley@cern.ch>
2033 * Checking the YODA minimum version in the configure script.
2035 * Fixing the JADE_OPAL analysis ycut values to the midpoints,
2036 thanks to information from Christoph Pahl / Stefan Kluth.
2038 2014-01-29 Andy Buckley <andy.buckley@cern.ch>
2040 * Removing unused/overrestrictive Isolation* headers.
2042 2014-01-27 Andy Buckley <andy.buckley@cern.ch>
2044 * Re-bundling yaml-cpp, now built as a mangled static lib based on
2045 the LHAPDF6 experience.
2047 * Throw a UserError rather than an assert if AnalysisHandler::init
2048 is called more than once.
2050 2014-01-25 David Grellscheid <david.grellscheid@durham.ac.uk>
2052 * src/Core/Cuts.cc: New Cuts machinery, already used in FinalState.
2053 Old-style "mineta, maxeta, minpt" constructors kept around for ease of
2054 transition. Minimal set of convenience functions available, like EtaIn(),
2055 should be expanded as needed.
2057 2014-01-22 Andy Buckley <andy.buckley@cern.ch>
2059 * configure.ac: Remove opportunistic C++11 build, until this
2060 becomes mandatory (in version 2.2.0?). Anyone who wants C++11 can
2061 explicitly set the CXXFLAGS (and DYLDFLAGS for pre-Mavericks Macs)
2063 2014-01-21 Leif Lonnblad <Leif.Lonnblad@thep.lu.se>
2065 * src/Core/Analysis.cc: Fixed bug in Analysis::isCompatible where
2066 an 'abs' was left out when checking that beam energes does not
2067 differ by more than 1GeV.
2069 * src/Analyses/CMS_2011_S8978280.cc: Fixed checking of beam energy
2070 and booking corresponding histograms.
2072 2013-12-19 Andy Buckley <andy.buckley@cern.ch>
2074 * Adding pid() and abspid() methods to Particle.
2076 * Adding hasCharm and hasBottom methods to Particle.
2078 * Adding a sorting functor arg version of the ZFinder::constituents() method.
2080 * Adding pTmin cut accessors to HeavyHadrons.
2082 * Tweak to the WFinder constructor to place the target W (trans) mass argument last.
2084 2013-12-18 Andy Buckley <andy.buckley@cern.ch>
2086 * Adding a GenParticle* cast operator to Particle, removing the
2087 Particle and Jet copies of the momentum cmp functors, and general
2088 tidying/improvement/unification of the momentum properties of jets
2089 and particles.
2091 2013-12-17 Andy Buckley <andy.buckley@cern.ch>
2093 * Using SFINAE techniques to improve the math util functions.
2095 * Adding isNeutrino to ParticleIdUtils, and
2096 isHadron/isMeson/isBaryon/isLepton/isNeutrino methods to Particle.
2098 * Adding a FourMomentum cast operator to ParticleBase, so that
2099 Particle and Jet objects can be used directly as FourMomentums.
2101 2013-12-16 Andy Buckley <andy@duality>
2103 * LeptonClusters renamed to DressedLeptons.
2105 * Adding singular particle accessor functions to WFinder and ZFinder.
2107 * Removing ClusteredPhotons and converting ATLAS_2010_S8919674.
2109 2013-12-12 Andy Buckley <andy.buckley@cern.ch>
2111 * Fixing a problem with --disable-analyses (thanks to David Hall)
2113 * Require FastJet version 3.
2115 * Bumped version to 2.1.0a0
2117 * Adding -DNDEBUG to the default build flags, unless in --enable-debug mode.
2119 * Adding a special treatment of RIVET_*_PATH variables: if they
2120 end in :: the default search paths will not be appended. Used
2121 primarily to restrict the doc builds to look only inside the build
2122 dirs, but potentially also useful in other special circumstances.
2124 * Adding a definition of exec_prefix to rivet-buildplugin.
2126 * Adding -DNDEBUG to the default non-debug build flags.
2128 2013-11-27 Andy Buckley <andy.buckley@cern.ch>
2130 * Removing accidentally still-present no-as-needed linker flag from rivet-config.
2132 * Lots of analysis clean-up and migration to use new features and W/Z finder APIs.
2134 * More momentum method forwarding on ParticleBase and adding
2135 abseta(), absrap() etc. functions.
2137 * Adding the DEFAULT_RIVET_ANA_CONSTRUCTOR cosmetic macro.
2139 * Adding deltaRap() etc. function variations
2141 * Adding no-decay photon clustering option to WFinder and ZFinder,
2142 and replacing opaque bool args with enums.
2144 * Adding an option for ignoring photons from hadron/tau decays in LeptonClusters.
2146 2013-11-22 Andy Buckley <andy.buckley@cern.ch>
2148 * Adding Particle::fromBottom/Charm/Tau() members. LHCb were
2149 aready mocking this up, so it seemed sensible to add it to the
2150 interface as a more popular (and even less dangerous) version of
2151 hasAncestor().
2153 * Adding an empty() member to the JetAlg interface.
2155 2013-11-07 Andy Buckley <andy.buckley@cern.ch>
2157 * Adding the GSL lib path to the library path in the env scripts
2158 and the rivet-config --ldflags output.
2160 2013-10-25 Andy Buckley <andy.buckley@cern.ch>
2162 * 2.0.0 release!!!!!!
2164 2013-10-24 Andy Buckley <andy.buckley@cern.ch>
2166 * Supporting zsh completion via bash completion compatibility.
2168 2013-10-22 Andy Buckley <andy.buckley@cern.ch>
2170 * Updating the manual to describe YODA rather than AIDA and the new rivet-cmphistos script.
2172 * bin/make-plots: Adding paths to error messages in histogram combination.
2174 * CDF_2005_S6217184: fixes to low stats errors and final scatter plot binning.
2176 2013-10-21 Andy Buckley <andy.buckley@cern.ch>
2178 * Several small fixes in jet shape analyses, SFM_1984, etc. found
2179 in the last H++ validation run.
2181 2013-10-18 Andy Buckley <andy.buckley@cern.ch>
2183 * Updates to configure and the rivetenv scripts to try harder to discover YODA.
2185 2013-09-26 Andy Buckley <andy.buckley@cern.ch>
2187 * Now bundling Cython-generated files in the tarballs, so Cython
2188 is not a build requirement for non-developers.
2190 2013-09-24 Andy Buckley <andy.buckley@cern.ch>
2192 * Removing unnecessary uses of a momentum() indirection when
2193 accessing kinematic variables.
2195 * Clean-up in Jet, Particle, and ParticleBase, in particular
2196 splitting PID functions on Particle from those on PID codes, and
2197 adding convenience kinematic functions to ParticleBase.
2199 2013-09-23 Andy Buckley <andy.buckley@cern.ch>
2201 * Add the -avoid-version flag to libtool.
2203 * Final analysis histogramming issues resolved.
2205 2013-08-16 Andy Buckley <andy.buckley@cern.ch>
2207 * Adding a ConnectBins flag in make-plots, to decide whether to
2208 connect adjacent, gapless bins with a vertical line. Enabled by
2209 default (good for the step-histo default look of MC lines), but
2210 now rivet-cmphistos disables it for the reference data.
2212 2013-08-14 Andy Buckley <andy.buckley@cern.ch>
2214 * Making 2.0.0beta3 -- just a few remaining analysis migration
2215 issues remaining but it's worth making another beta since there
2216 were lots of framework fixes/improvements.
2218 2013-08-11 Andy Buckley <andy.buckley@cern.ch>
2220 * ARGUS_1993_S2669951 also fixed using scatter autobooking.
2222 * Fixing remaining issues with booking in BABAR_2007_S7266081
2223 using the feature below (far nicer than hard-coding).
2225 * Adding a copy_pts param to some Analysis::bookScatter2D methods:
2226 pre-setting the points with x values is sometimes genuinely
2227 useful.
2229 2013-07-26 Andy Buckley <andy.buckley@cern.ch>
2231 * Removed the (officially) obsolete CDF 2008 LEADINGJETS and
2232 NOTE_9351 underlying event analyses -- superseded by the proper
2233 versions of these analyses based on the final combined paper.
2235 * Removed the semi-demo Multiplicity projection -- only the
2236 EXAMPLE analysis and the trivial ALEPH_1991_S2435284 needed
2237 adaptation.
2239 2013-07-24 Andy Buckley <andy.buckley@cern.ch>
2241 * Adding a rejection of histo paths containing /TMP/ from the
2242 writeData function. Use this to handle booked temporary
2243 histograms... for now.
2245 2013-07-23 Andy Buckley <andy.buckley@cern.ch>
2247 * Make rivet-cmphistos _not_ draw a ratio plot if there is only one line.
2249 * Improvements and fixes to HepData lookup with rivet-mkanalysis.
2251 2013-07-22 Andy Buckley <andy.buckley@cern.ch>
2253 * Add -std=c++11 or -std=c++0x to the Rivet compiler flags if supported.
2255 * Various fixes to analyses with non-zero numerical diffs.
2257 2013-06-12 Andy Buckley <andy.buckley@cern.ch>
2259 * Adding a new HeavyHadrons projection.
2261 * Adding optional extra include_end args to logspace() and linspace().
2263 2013-06-11 Andy Buckley <andy.buckley@cern.ch>
2265 * Moving Rivet/RivetXXX.hh tools headers into Rivet/Tools/.
2267 * Adding PrimaryHadrons projection.
2269 * Adding particles_in/out functions on GenParticle to RivetHepMC.
2271 * Moved STL extensions from Utils.hh to RivetSTL.hh and tidying.
2273 * Tidying, improving, extending, and documenting in RivetSTL.hh.
2275 * Adding a #include of Logging.hh into Projection.hh, and removing
2276 unnecessary #includes from all Projection headers.
2278 2013-06-10 Andy Buckley <andy.buckley@cern.ch>
2280 * Moving htmlify() and detex() Python functions into rivet.util.
2282 * Add HepData URL for Inspire ID lookup to the rivet script.
2284 * Fix analyses' info files which accidentally listed the Inspire
2285 ID under the SpiresID metadata key.
2287 2013-06-07 Andy Buckley <andy.buckley@cern.ch>
2289 * Updating mk-analysis-html script to produce MathJax output
2291 * Adding a version of Analysis::removeAnalysisObject() which takes
2292 an AO pointer as its argument.
2294 * bin/rivet: Adding pandoc-based conversion of TeX summary and
2295 description strings to plain text on the terminal output.
2297 * Add MathJax to rivet-mkhtml output, set up so the .info entries should render ok.
2299 * Mark the OPAL 1993 analysis as UNVALIDATED: from the H++
2300 benchmark runs it looks nothing like the data, and there are some
2301 outstanding ambiguities.
2303 2013-06-06 Andy Buckley <andy.buckley@cern.ch>
2305 * Releasing 2.0.0b2 beta version.
2307 2013-06-05 Andy Buckley <andy.buckley@cern.ch>
2309 * Renaming Analysis::add() etc. to very explicit
2310 addAnalysisObject(), sorting out shared_pointer polymorphism
2311 issues via the Boost dynamic_pointer_cast, and adding a full set
2312 of getHisto1D(), etc. explicitly named and typed accessors,
2313 including ones with HepData dataset/axis ID signatures.
2315 * Adding histo booking from an explicit reference Scatter2D (and
2316 more placeholders for 2D histos / 3D scatters) and rewriting
2317 existing autobooking to use this.
2319 * Converting inappropriate uses of size_t to unsigned int in Analysis.
2321 * Moving Analysis::addPlot to Analysis::add() (or reg()?) and
2322 adding get() and remove() (or unreg()?)
2324 * Fixing attempted abstraction of import fallbacks in rivet.util.import_ET().
2326 * Removing broken attempt at histoDir() caching which led to all
2327 histograms being registered under the same analysis name.
2329 2013-06-04 Andy Buckley <andy.buckley@cern.ch>
2331 * Updating the Cython version requirement to 0.18
2333 * Adding Analysis::integrate() functions and tidying the Analysis.hh file a bit.
2335 2013-06-03 Andy Buckley <andy.buckley@cern.ch>
2337 * Adding explicit protection against using inf/nan scalefactors in
2338 ATLAS_2011_S9131140 and H1_2000_S4129130.
2340 * Making Analysis::scale noisly complain about invalid
2341 scalefactors.
2343 2013-05-31 Andy Buckley <andy.buckley@cern.ch>
2345 * Reducing the TeX main memory to ~500MB. Turns out that it *can*
2346 be too large with new versions of TeXLive!
2348 2013-05-30 Andy Buckley <andy.buckley@cern.ch>
2350 * Reverting bookScatter2D behaviour to never look at ref data, and
2351 updating a few affected analyses. This should fix some bugs with
2352 doubled datapoints introduced by the previous behaviour+addPoint.
2354 * Adding a couple of minor Utils.hh and MathUtils.hh features.
2356 2013-05-29 Andy Buckley <andy.buckley@cern.ch>
2358 * Removing Constraints.hh header.
2360 * Minor bugfixes and improvements in Scatter2D booking and MC_JetAnalysis.
2362 2013-05-28 Andy Buckley <andy.buckley@cern.ch>
2364 * Removing defunct HistoFormat.hh and HistoHandler.{hh,cc}
2366 2013-05-27 Andy Buckley <andy.buckley@cern.ch>
2368 * Removing includes of Logging.hh, RivetYODA.hh, and
2369 ParticleIdUtils.hh from analyses (and adding an include of
2370 ParticleIdUtils.hh to Analysis.hh)
2372 * Removing now-unused .fhh files.
2374 * Removing lots of unnecessary .fhh includes from core classes:
2375 everything still compiling ok. A good opportunity to tidy this up
2376 before the release.
2378 * Moving the rivet-completion script from the data dir to bin (the
2379 completion is for scripts in bin, and this makes development
2380 easier).
2382 * Updating bash completion scripts for YODA format and
2383 compare-histos -> rivet-cmphistos.
2385 2013-05-23 Andy Buckley <andy.buckley@cern.ch>
2387 * Adding Doxy comments and a couple of useful convenience functions to Utils.hh.
2389 * Final tweaks to ATLAS ttbar jet veto analysis (checked logic with Kiran Joshi).
2391 2013-05-15 Andy Buckley <andy.buckley@cern.ch>
2393 * Many 1.0 -> weight bugfixes in ATLAS_2011_I945498.
2395 * yaml-cpp v3 support re-introduced in .info parsing.
2397 * Lots of analysis clean-ups for YODA TODO issues.
2399 2013-05-13 Andy Buckley <andy.buckley@cern.ch>
2401 * Analysis histo booking improvements for Scatter2D, placeholders
2402 for 2D histos, and general tidying.
2404 2013-05-12 Andy Buckley <andy.buckley@cern.ch>
2406 * Adding configure-time differentiation between yaml-cpp API versions 3 and 5.
2408 2013-05-07 Andy Buckley <andy.buckley@cern.ch>
2410 * Converting info file reading to use the yaml-cpp 0.5.x API.
2412 2013-04-12 Andy Buckley <andy.buckley@cern.ch>
2414 * Tagging as 2.0.0b1
2416 2013-04-04 Andy Buckley <andy.buckley@cern.ch>
2418 * Removing bundling of yaml-cpp: it needs to be installed by the
2419 user / bootstrap script from now on.
2421 2013-04-03 Andy Buckley <andy.buckley@cern.ch>
2423 * Removing svn:external m4 directory, and converting Boost
2424 detection to use better boost.m4 macros.
2426 2013-03-22 Andy Buckley <andy.buckley@cern.ch>
2428 * Moving PID consts to the PID namespace and corresponding code
2429 updates and opportunistic clean-ups.
2431 * Adding Particle::fromDecay() method.
2433 2013-03-09 Andy Buckley <andy.buckley@cern.ch>
2435 * Version bump to 2.0.0b1 in anticipation of first beta release.
2437 * Adding many more 'popular' particle ID code named-consts and
2438 aliases, and updating the RapScheme enum with ETA -> ETARAP, and
2439 fixing affected analyses (plus other opportunistic tidying / minor
2440 bug-fixing).
2442 * Fixing a symbol misnaming in ATLAS_2012_I1119557.
2444 2013-03-07 Andy Buckley <andy.buckley@cern.ch>
2446 * Renaming existing uses of ParticleVector to the new 'Particles' type.
2448 * Updating util classes, projections, and analyses to deal with
2449 the HepMC return value changes.
2451 * Adding new Particle(const GenParticle*) constructor.
2453 * Converting Particle::genParticle() to return a const pointer
2454 rather than a reference, for the same reason as below (+
2455 consistency within Rivet and with the HepMC pointer-centric coding
2456 design).
2458 * Converting Event to use a different implementation of original
2459 and modified GenParticles, and to manage the memory in a more
2460 future-proof way. Event::genParticle() now returns a const pointer
2461 rather than a reference, to signal that the user is leaving the
2462 happy pastures of 'normal' Rivet behind.
2464 * Adding a Particles typedef by analogy to Jets, and in preference
2465 to the cumbersome ParticleVector.
2467 * bin/: Lots of tidying/pruning of messy/defunct scripts.
2469 * Creating spiresbib, util, and plotinfo rivet python module
2470 submodules: this eliminates lighthisto and the standalone
2471 spiresbib modules. Util contains convenience functions for Python
2472 version testing, clean ElementTree import, and process renaming,
2473 for primary use by the rivet-* scripts.
2475 * Removing defunct scripts that have been replaced/obsoleted by YODA.
2477 2013-03-06 Andy Buckley <andy.buckley@cern.ch>
2479 * Fixing doc build so that the reference histos and titles are
2480 ~correctly documented. We may want to truncate some of the lists!
2482 2013-03-06 Hendrik Hoeth <hendrik.hoeth@cern.ch>
2484 * Added ATLAS_2012_I1125575 analysis
2486 * Converted rivet-mkhtml to yoda
2488 * Introduced rivet-cmphistos as yoda based replacement for compare-histos
2490 2013-03-05 Andy Buckley <andy.buckley@cern.ch>
2492 * Replacing all AIDA ref data with YODA versions.
2494 * Fixing the histograms entries in the documentation to be
2495 tolerant to plotinfo loading failures.
2497 * Making the findDatafile() function primarily find YODA data
2498 files, then fall back to AIDA. The ref data loader will use the
2499 appropriate YODA format reader.
2501 2013-02-05 David Grellscheid <David.Grellscheid@durham.ac.uk>
2503 * include/Rivet/Math/MathUtils.hh: added BWspace bin edge method
2504 to give equal-area Breit-Wigner bins
2506 2013-02-01 Andy Buckley <andy.buckley@cern.ch>
2508 * Adding an element to the PhiMapping enum and a new mapAngle(angle, mapping) function.
2510 * Fixes to Vector3::azimuthalAngle and Vector3::polarAngle calculation (using the mapAngle functions).
2512 2013-01-25 Frank Siegert <frank.siegert@cern.ch>
2514 * Split MC_*JETS analyses into three separate bits:
2515 MC_*INC (inclusive properties)
2516 MC_*JETS (jet properties)
2517 MC_*KTSPLITTINGS (kT splitting scales).
2519 2013-01-22 Hendrik Hoeth <hendrik.hoeth@cern.ch>
2521 * Fix TeX variable in the rivetenv scripts, especially for csh
2523 2012-12-21 Andy Buckley <andy.buckley@cern.ch>
2525 * Version 1.8.2 release!
2527 2012-12-20 Andy Buckley <andy.buckley@cern.ch>
2529 * Adding ATLAS_2012_I1119557 analysis (from Roman Lysak and Lily Asquith).
2531 2012-12-18 Andy Buckley <andy.buckley@cern.ch>
2533 * Adding TOTEM_2012_002 analysis, from Sercan Sen.
2535 2012-12-18 Hendrik Hoeth <hendrik.hoeth@cern.ch>
2537 * Added CMS_2011_I954992 analysis
2539 2012-12-17 Hendrik Hoeth <hendrik.hoeth@cern.ch>
2541 * Added CMS_2012_I1193338 analysis
2543 * Fixed xi cut in ATLAS_2011_I894867
2545 2012-12-17 Andy Buckley <andy.buckley@cern.ch>
2547 * Adding analysis descriptions to the HTML analysis page ToC.
2549 2012-12-14 Hendrik Hoeth <hendrik.hoeth@cern.ch>
2551 * Added CMS_2012_PAS_FWD_11_003 analysis
2553 * Added LHCB_2012_I1119400 analysis
2555 2012-12-12 Andy Buckley <andy.buckley@cern.ch>
2557 * Correction to jet acceptance in CMS_2011_S9120041, from Sercan Sen: thanks!
2559 2012-12-12 Hendrik Hoeth <hendrik.hoeth@cern.ch>
2561 * Added CMS_2012_PAS_QCD_11_010 analysis
2563 2012-12-07 Andy Buckley <andy.buckley@cern.ch>
2565 * Version number bump to 1.8.2 -- release approaching.
2567 * Rewrite of ALICE_2012_I1181770 analysis to make it a bit more sane and acceptable.
2569 * Adding a note on FourVector and FourMomentum that operator- and
2570 operator-= invert both the space and time components: use of -=
2571 can result in a vector with negative energy.
2573 * Adding particlesByRapidity and particlesByAbsRapidity to FinalState.
2575 2012-12-07 Hendrik Hoeth <hendrik.hoeth@cern.ch>
2577 * Added ALICE_2012_I1181770 analysis
2579 * Bump version to 1.8.2
2581 2012-12-06 Hendrik Hoeth <hendrik.hoeth@cern.ch>
2583 * Added ATLAS_2012_I1188891 analysis
2585 * Added ATLAS_2012_I1118269 analysis
2587 * Added CMS_2012_I1184941 analysis
2589 * Added LHCB_2010_I867355 analysis
2591 * Added TGraphErrors support to root2flat
2593 2012-11-27 Andy Buckley <andy.buckley@cern.ch>
2595 * Converting CMS_2012_I1102908 analysis to use YODA.
2597 * Adding XLabel and YLabel setting in histo/profile/scatter booking.
2599 2012-11-27 Hendrik Hoeth <hendrik.hoeth@cern.ch>
2601 * Fix make-plots png creation for SL5
2603 2012-11-23 Peter Richardson <peter.richardson@durham.ac.uk>
2605 * Added ATLAS_2012_CONF_2012_153 4-lepton SUSY search
2607 2012-11-17 Andy Buckley <andy.buckley@cern.ch>
2609 * Adding MC_PHOTONS by Steve Lloyd and AB, for testing general
2610 unisolated photon properties, especially those associated with
2611 charged leptons (e and mu).
2613 2012-11-16 Andy Buckley <andy.buckley@cern.ch>
2615 * Adding MC_PRINTEVENT, a convenient (but verbose!) analysis for
2616 printing out event details to stdout.
2618 2012-11-15 Andy Buckley <andy.buckley@cern.ch>
2620 * Removing the long-unused/defunct autopackage system.
2622 2012-11-15 Hendrik Hoeth <hendrik.hoeth@cern.ch>
2624 * Added LHCF_2012_I1115479 analysis
2625 * Added ATLAS_2011_I894867 analysis
2627 2012-11-14 Hendrik Hoeth <hendrik.hoeth@cern.ch>
2629 * Added CMS_2012_I1102908 analysis
2631 2012-11-14 Andy Buckley <andy.buckley@cern.ch>
2633 * Converting the argument order of logspace, clarifying the
2634 arguments, updating affected code, and removing Analysis::logBinEdges.
2636 * Merging updates from the AIDA maintenance branch up to r4002
2637 (latest revision for next merges is r4009).
2639 2012-11-11 Andy Buckley <andy.buckley@cern.ch>
2641 * include/Math/: Various numerical fixes to Vector3::angle and
2642 changing the 4 vector mass treatment to permit spacelike
2643 virtualities (in some cases even the fuzzy isZero assert check was
2644 being violated). The angle check allows a clean-up of some
2645 workaround code in MC_VH2BB.
2647 2012-10-15 Hendrik Hoeth <hendrik.hoeth@cern.ch>
2649 * Added CMS_2012_I1107658 analysis
2651 2012-10-11 Hendrik Hoeth <hendrik.hoeth@cern.ch>
2653 * Added CDF_2012_NOTE10874 analysis
2655 2012-10-04 Hendrik Hoeth <hendrik.hoeth@cern.ch>
2657 * Added ATLAS_2012_I1183818 analysis
2659 2012-07-17 Hendrik Hoeth <hendrik.hoeth@cern.ch>
2661 * Cleanup and multiple fixes in CMS_2011_S9120041
2663 * Bugfixed in ALEPH_2004_S5765862 and ATLAS_2010_CONF_2010_049
2664 (thanks to Anil Pratap)
2666 2012-08-09 Andy Buckley <andy.buckley@cern.ch>
2668 * Fixing aida2root command-line help message and converting to TH*
2669 rather than TGraph by default.
2671 2012-07-24 Andy Buckley <andy.buckley@cern.ch>
2673 * Improvements/migrations to rivet-mkhtml, rivet-mkanalysis, and
2674 rivet-buildplugin.
2676 2012-07-17 Hendrik Hoeth <hendrik.hoeth@cern.ch>
2678 * Add CMS_2012_I1087342
2680 2012-07-12 Andy Buckley <andy.buckley@cern.ch>
2682 * Fix rivet-mkanalysis a bit for YODA compatibility.
2684 2012-07-05 Hendrik Hoeth <hendrik.hoeth@cern.ch>
2686 * Version 1.8.1!
2688 2012-07-05 Holger Schulz <holger.schulz@physik.hu-berlin.de>
2690 * Add ATLAS_2011_I945498
2692 2012-07-03 Hendrik Hoeth <hendrik.hoeth@cern.ch>
2694 * Bugfix for transverse mass (thanks to Gavin Hesketh)
2696 2012-06-29 Hendrik Hoeth <hendrik.hoeth@cern.ch>
2698 * Merge YODA branch into trunk. YODA is alive!!!!!!
2700 2012-06-26 Holger Schulz <holger.schulz@physik.hu-berlin.de>
2702 * Add ATLAS_2012_I1091481
2704 2012-06-20 Hendrik Hoeth <hendrik.hoeth@cern.ch>
2706 * Added D0_2011_I895662: 3-jet mass
2708 2012-04-24 Hendrik Hoeth <hendrik.hoeth@cern.ch>
2710 * fixed a few bugs in rivet-rmgaps
2712 * Added new TOTEM dN/deta analysis
2714 2012-03-19 Andy Buckley <andy.buckley@cern.ch>
2716 * Version 1.8.0!
2718 * src/Projections/UnstableFinalState.cc: Fix compiler warning.
2720 * Version bump for testing: 1.8.0beta1.
2722 * src/Core/AnalysisInfo.cc: Add printout of YAML parser exception error messages to aid debugging.
2724 * bin/Makefile.am: Attempt to fix rivet-nopy build on SLC5.
2726 * src/Analyses/LHCB_2010_S8758301.cc: Add two missing entries to the PDGID -> lifetime map.
2728 * src/Projections/UnstableFinalState.cc: Extend list of vetoed particles to include reggeons.
2730 2012-03-16 Andy Buckley <andy.buckley@cern.ch>
2732 * Version change to 1.8.0beta0 -- nearly ready for long-awaited release!
2734 * pyext/setup.py.in: Adding handling for the YAML library: fix for
2735 Genser build from Anton Karneyeu.
2737 * src/Analyses/LHCB_2011_I917009.cc: Hiding lifetime-lookup error
2738 message if the offending particle is not a hadron.
2740 * include/Rivet/Math/MathHeader.hh: Using unnamespaced std::isnan
2741 and std::isinf as standard.
2743 2012-03-16 Hendrik Hoeth <hendrik.hoeth@cern.ch>
2745 * Improve default plot behaviour for 2D histograms
2747 2012-03-15 Hendrik Hoeth <hendrik.hoeth@cern.ch>
2749 * Make ATLAS_2012_I1084540 less verbose, and general code
2750 cleanup of that analysis.
2752 * New-style plugin hook in ATLAS_2011_I926145,
2753 ATLAS_2011_I944826 and ATLAS_2012_I1084540
2755 * Fix compiler warnings in ATLAS_2011_I944826 and CMS_2011_S8973270
2757 * CMS_2011_S8941262: Weights are double, not int.
2759 * disable inRange() tests in test/testMath.cc until we have a proper
2760 fix for the compiler warnings we see on SL5.
2762 2012-03-07 Andy Buckley <andy.buckley@cern.ch>
2764 * Marking ATLAS_2011_I919017 as VALIDATED (this should have
2765 happened a long time ago) and adding more references.
2767 2012-02-28 Hendrik Hoeth <hendrik.hoeth@cern.ch>
2769 * lighthisto.py: Caching for re.compile(). This speeds up aida2flat
2770 and flat2aida by more than an order of magnitude.
2772 2012-02-27 Andy Buckley <andy.buckley@cern.ch>
2774 * doc/mk-analysis-html: Adding more LaTeX/text -> HTML conversion
2775 replacements, including better <,> handling.
2777 2012-02-26 Andy Buckley <andy.buckley@cern.ch>
2779 * Adding CMS_2011_S8973270, CMS_2011_S8941262, CMS_2011_S9215166,
2780 CMS_QCD_10_024, from CMS.
2782 * Adding LHCB_2011_I917009 analysis, from Alex Grecu.
2784 * src/Core/Analysis.cc, include/Rivet/Analysis.hh: Add a numeric-arg version of histoPath().
2786 2012-02-24 Holger Schulz <holger.schulz@physik.hu-berlin.de>
2788 * Adding ATLAS Ks/Lambda analysis.
2790 2012-02-20 Andy Buckley <andy.buckley@cern.ch>
2792 * src/Analyses/ATLAS_2011_I925932.cc: Using new overflow-aware
2793 normalize() in place of counters and scale(..., 1/count)
2795 2012-02-14 Andy Buckley <andy.buckley@cern.ch>
2797 * Splitting MC_GENERIC to put the PDF and PID plotting into
2798 MC_PDFS and MC_IDENTIFIED respectively.
2800 * Renaming MC_LEADINGJETS to MC_LEADJETUE.
2802 2012-02-14 Hendrik Hoeth <hendrik.hoeth@cern.ch>
2804 * DELPHI_1996_S3430090 and ALEPH_1996_S3486095:
2805 fix rapidity vs {Thrust,Sphericity}-axis.
2807 2012-02-14 Andy Buckley <andy.buckley@cern.ch>
2809 * bin/compare-histos: Don't attempt to remove bins from MC histos
2810 where they aren't found in the ref file, if the ref file is not
2811 expt data, or if the new --no-rmgapbins arg is given.
2813 * bin/rivet: Remove the conversion of requested analysis names to
2814 upper-case: mixed-case analysis names will now work.
2816 2012-02-14 Frank Siegert <frank.siegert@cern.ch>
2818 * Bugfixes and improvements for MC_TTBAR:
2819 - Avoid assert failure with logspace starting at 0.0
2820 - Ignore charged lepton in jet finding (otherwise jet multi is always
2821 +1).
2822 - Add some dR/deta/dphi distributions as noted in TODO
2823 - Change pT plots to logspace as well (to avoid low-stat high pT bins)
2825 2012-02-10 Hendrik Hoeth <hendrik.hoeth@cern.ch>
2827 * rivet-mkhtml -c option now has the semantics of a .plot
2828 file. The contents are appended to the dat output by
2829 compare-histos.
2831 2012-02-09 David Grellscheid <david.grellscheid@durham.ac.uk>
2833 * Fixed broken UnstableFS behaviour
2835 2012-01-25 Frank Siegert <frank.siegert@cern.ch>
2837 * Improvements in make-plots:
2838 - Add PlotTickLabels and RatioPlotTickLabels options (cf.
2839 make-plots.txt)
2840 - Make ErrorBars and ErrorBands non-exclusive (and change
2841 their order, such that Bars are on top of Bands)
2843 2012-01-25 Holger Schulz <holger.schulz@physik.hu-berlin.de>
2845 * Add ATLAS diffractive gap analysis
2847 2012-01-23 Andy Buckley <andy.buckley@cern.ch>
2849 * bin/rivet: When using --list-analyses, the analysis summary is
2850 now printed out when log level is <= INFO, rather than < INFO.
2851 The effect on command line behaviour is that useful identifying
2852 info is now printed by default when using --list-analyses, rather
2853 than requiring --list-analyses -v. To get the old behaviour,
2854 e.g. if using the output of rivet --list-analyses for scripting,
2855 now use --list-analyses -q.
2857 2012-01-22 Andy Buckley <andy.buckley@cern.ch>
2859 * Tidying lighthisto, including fixing the order in which +- error
2860 values are passed to the Bin constructor in fromFlatHisto.
2862 2012-01-16 Frank Siegert <frank.siegert@cern.ch>
2864 * Bugfix in ATLAS_2012_I1083318: Include non-signal neutrinos in
2865 jet clustering.
2867 * Add first version of ATLAS_2012_I1083318 (W+jets). Still
2868 UNVALIDATED until final happiness with validation plots arises and
2869 data is in Hepdata.
2871 * Bugfix in ATLAS_2010_S8919674: Really use neutrino with highest
2872 pT for Etmiss. Doesn't seem to make very much difference, but is
2873 more correct in principle.
2875 2012-01-16 Peter Richardson <peter.richardson@durham.ac.uk>
2877 * Fixes to ATLAS_20111_S9225137 to include reference data
2879 2012-01-13 Holger Schulz <holger.schulz@physik.hu-berlin.de>
2881 * Add ATLAS inclusive lepton analysis
2883 2012-01-12 Hendrik Hoeth <hendrik.hoeth@durham.ac.uk>
2885 * Font selection support in rivet-mkhtml
2887 2012-01-11 Peter Richardson <peter.richardson@durham.ac.uk>
2889 * Added pi0 to list of particles.
2891 2012-01-11 Andy Buckley <andy.buckley@cern.ch>
2893 * Removing references to Boost random numbers.
2895 2011-12-30 Andy Buckley <andy.buckley@cern.ch>
2897 * Adding a placeholder rivet-which script (not currently
2898 installed).
2900 * Tweaking to avoid a very time-consuming debug printout in
2901 compare-histos with the -v flag, and modifying the Rivet env vars
2902 in rivet-mkhtml before calling compare-histos to eliminate
2903 problems induced by relative paths (i.e. "." does not mean the
2904 same thing when the directory is changed within the script).
2906 2011-12-12 Andy Buckley <andy.buckley@cern.ch>
2908 * Adding a command line completion function for rivet-mkhtml.
2910 2011-12-12 Frank Siegert <frank.siegert@cern.ch>
2912 * Fix for factor of 2.0 in normalisation of CMS_2011_S9086218
2914 * Add --ignore-missing option to rivet-mkhtml to ignore non-existing
2915 AIDA files.
2917 2011-12-06 Andy Buckley <andy.buckley@cern.ch>
2919 * Include underflow and overflow bins in the normalisation when
2920 calling Analysis::normalise(h)
2922 2011-11-23 Andy Buckley <andy.buckley@cern.ch>
2924 * Bumping version to 1.8.0alpha0 since the Jet interface changes
2925 are quite a major break with backward compatibility (although the
2926 vast majority of analyses should be unaffected).
2928 * Removing crufty legacy stuff from the Jet class -- there is
2929 never any ambiguity between whether Particle or FourMomentum
2930 objects are the constituents now, and the jet 4-momentum is set
2931 explicitly by the jet alg so that e.g. there is no mismatch if the
2932 FastJet pt recombination scheme is used.
2934 * Adding default do-nothing implementations of Analysis::init()
2935 and Analysis::finalize(), since it is possible for analysis
2936 implementations to not need to do anything in these methods, and
2937 forcing analysis authors to write do-nothing boilerplate code is
2938 not "the Rivet way"!
2940 2011-11-19 Andy Buckley <andy.buckley@cern.ch>
2942 * Adding variant constructors to FastJets with a more natural
2943 Plugin* argument, and decrufting the constructor implementations a
2944 bit.
2946 * bin/rivet: Adding a more helpful error message if the rivet
2947 module can't be loaded, grouping the option parser options,
2948 removing the -A option (this just doesn't seem useful anymore),
2949 and providing a --pwd option as a shortcut to append "." to the
2950 search path.
2952 2011-11-18 Andy Buckley <andy.buckley@cern.ch>
2954 * Adding a guide to compiling a new analysis template to the
2955 output message of rivet-mkanalysis.
2957 2011-11-11 Andy Buckley <andy.buckley@cern.ch>
2959 * Version 1.7.0 release!
2961 * Protecting the OPAL 2004 analysis against NaNs in the
2962 hemispheres projection -- I can't track the origin of these and
2963 suspect some occasional memory corruption.
2965 2011-11-09 Andy Buckley <andy@insectnation.org>
2967 * Renaming source files for EXAMPLE and
2968 PDG_HADRON_MULTIPLICITIES(_RATIOS) analyses to match the analysis
2969 names.
2971 * Cosmetic fixes in ATLAS_2011_S9212183 SUSY analysis.
2973 * Adding new ATLAS W pT analysis from Elena Yatsenko (slightly adapted).
2975 2011-10-20 Frank Siegert <frank.siegert@cern.ch>
2977 * Extend API of W/ZFinder to allow for specification of input final
2978 state in which to search for leptons/photons.
2980 2011-10-19 Andy Buckley <andy@insectnation.org>
2982 * Adding new version of LHCB_2010_S8758301, based on submission
2983 from Alex Grecu. There is some slightly dodgy-looking GenParticle*
2984 fiddling going on, but apparently it's necessary (and hopefully robust).
2986 2011-10-17 Andy Buckley <andy@insectnation.org>
2988 * bin/rivet-nopy linker line tweak to make compilation work with
2989 GCC 4.6 (-lHepMC has to be explicitly added for some reason).
2991 2011-10-13 Frank Siegert <frank.siegert@cern.ch>
2993 * Add four CMS QCD analyses kindly provided by CMS.
2995 2011-10-12 Andy Buckley <andy@insectnation.org>
2997 * Adding a separate test program for non-matrix/vector math
2998 functions, and adding a new set of int/float literal arg tests for
2999 the inRange functions in it.
3001 * Adding a jet multiplicity plot for jets with pT > 30 GeV to
3002 MC_TTBAR.
3004 2011-10-11 Andy Buckley <andy@insectnation.org>
3006 * Removing SVertex.
3008 2011-10-11 James Monk <jmonk@cern.ch>
3010 * root2flat was missing the first bin (plus spurious last bin)
3012 * My version of bash does not understand the pipe syntax |& in rivet-buildplugin
3014 2011-09-30 James Monk <jmonk@cern.ch>
3016 * Fix bug in ATLAS_2010_S8817804 that misidentified the akt4 jets
3017 as akt6
3019 2011-09-29 Andy Buckley <andy@insectnation.org>
3021 * Converting FinalStateHCM to a slightly more general
3022 DISFinalState.
3024 2011-09-26 Andy Buckley <andy@insectnation.org>
3026 * Adding a default libname argument to rivet-buildplugin. If the
3027 first argument doesn't have a .so library suffix, then use
3028 RivetAnalysis.so as the default.
3030 2011-09-19 Hendrik Hoeth <hendrik.hoeth@cern.ch>
3032 * make-plots: Fixing regex for \physicscoor. Adding "FrameColor"
3033 option.
3035 2011-09-17 Andy Buckley <andy@insectnation.org>
3037 * Improving interactive metadata printout, by not printing
3038 headings for missing info.
3040 * Bumping the release number to 1.7.0alpha0, since with these
3041 SPIRES/Inspire changes and the MissingMomentum API change we need
3042 more than a minor release.
3044 * Updating the mkanalysis, BibTeX-grabbing and other places that
3045 care about analysis SPIRES IDs to also be able to handle the new
3046 Inspire system record IDs. The missing link is getting to HepData
3047 from an Inspire code...
3049 * Using the .info file rather than an in-code declaration to
3050 specify that an analysis needs cross-section information.
3052 * Adding Inspire support to the AnalysisInfo and Analysis
3053 interfaces. Maybe we can find a way to combine the two,
3054 e.g. return the SPIRES code prefixed with an "S" if no Inspire ID
3055 is available...
3057 2011-09-17 Hendrik Hoeth <hendrik.hoeth@cern.ch>
3059 * Added ALICE_2011_S8909580 (strange particle production at 900 GeV)
3061 * Feed-down correction in ALICE_2011_S8945144
3063 2011-09-16 Andy Buckley <andy@insectnation.org>
3065 * Adding ATLAS track jet analysis, modified from the version
3066 provided by Seth Zenz: ATLAS_2011_I919017. Note that this analysis
3067 is currently using the Inspire ID rather than the Spires one:
3068 we're clearly going to have to update the API to handle Inspire
3069 codes, so might as well start now...
3071 2011-09-14 Andy Buckley <andy@insectnation.org>
3073 * Adding the ATLAS Z pT measurement at 7 TeV (ATLAS_2011_S9131140)
3074 and an MC analysis for VH->bb events (MC_VH2BB).
3076 2011-09-12 Andy Buckley <andy@insectnation.org>
3078 * Removing uses of getLog, cout, cerr, and endl from all standard
3079 analyses and projections, except in a very few special cases.
3081 2011-09-10 Andy Buckley <andy@insectnation.org>
3083 * Changing the behaviour and interface of the MissingMomentum
3084 projection to calculate vector ET correctly. This was previously
3085 calculated according to the common definition of -E*sin(theta) of
3086 the summed visible 4-momentum in the event, but that is incorrect
3087 because the timelike term grows monotonically. Instead, transverse
3088 2-vectors of size ET need to be constructed for each visible
3089 particle, and vector-summed in the transverse plane.
3091 The rewrite of this behaviour made it opportune to make an API
3092 improvement: the previous method names scalarET/vectorET() have
3093 been renamed to scalar/vectorEt() to better match the Rivet
3094 FourMomentum::Et() method, and MissingMomentum::vectorEt() now
3095 returns a Vector3 rather than a double so that the transverse
3096 missing Et direction is also available.
3098 Only one data analysis has been affected by this change in
3099 behaviour: the D0_2004_S5992206 dijet delta(phi) analysis. It's
3100 expected that this change will not be very significant, as it is
3101 a *veto* on significant missing ET to reduce non-QCD
3102 contributions. MC studies using this analysis ~always run with QCD
3103 events only, so these contributions should be small. The analysis
3104 efficiency may have been greatly improved, as fewer events will
3105 now fail the missing ET veto cut.
3107 * Add sorting of the ParticleVector returned by the ChargedLeptons
3108 projection.
3110 * configure.ac: Adding a check to make sure that no-one tries to
3111 install into --prefix=$PWD.
3113 2011-09-04 Andy Buckley <andy@insectnation.org>
3115 * lighthisto fixes from Christian Roehr.
3117 2011-08-26 Andy Buckley <andy@insectnation.org>
3119 * Removing deprecated features: the setBeams(...) method on
3120 Analysis, the MaxRapidity constant, the split(...) function, the
3121 default init() method from AnalysisHandler and its test, and the
3122 deprecated TotalVisibleMomentum and PVertex projections.
3124 2011-08-23 Andy Buckley <andy@insectnation.org>
3126 * Adding a new DECLARE_RIVET_PLUGIN wrapper macro to hide the
3127 details of the plugin hook system from analysis authors. Migration
3128 of all analyses and the rivet-mkanalysis script to use this as the
3129 standard plugin hook syntax.
3131 * Also call the --cflags option on root-config when using the
3132 --root option with rivet-biuldplugin (thanks to Richard Corke for
3133 the report)
3135 2011-08-23 Frank Siegert <frank.siegert@cern.ch>
3137 * Added ATLAS_2011_S9126244
3138 * Added ATLAS_2011_S9128077
3140 2011-08-23 Hendrik Hoeth <hendrik.hoeth@cern.ch>
3142 * Added ALICE_2011_S8945144
3144 * Remove obsolete setBeams() from the analyses
3146 * Update CMS_2011_S8957746 reference data to the official numbers
3148 * Use Inspire rather than Spires.
3150 2011-08-19 Frank Siegert <frank.siegert@cern.ch>
3152 * More NLO parton level generator friendliness: Don't crash or fail when
3153 there are no beam particles.
3155 * Add --ignore-beams option to skip compatibility check.
3157 2011-08-09 David Mallows <dave.mallows@gmail.com>
3159 * Fix aida2flat to ignore empty dataPointSet
3161 2011-08-07 Andy Buckley <andy@insectnation.org>
3163 * Adding TEXINPUTS and LATEXINPUTS prepend definitions to the
3164 variables provided by rivetenv.(c)sh. A manual setting of these
3165 variables that didn't include the Rivet TEXMFHOME path was
3166 breaking make-plots on lxplus, presumably since the system LaTeX
3167 packages are so old there.
3169 2011-08-02 Frank Siegert <frank.siegert@cern.ch>
3171 Version 1.6.0 release!
3173 2011-08-01 Frank Siegert <frank.siegert@cern.ch>
3175 * Overhaul of the WFinder and ZFinder projections, including a change
3176 of interface. This solves potential problems with leptons which are not
3177 W/Z constituents being excluded from the RemainingFinalState.
3179 2011-07-29 Andy Buckley <andy@insectnation.org>
3181 * Version 1.5.2 release!
3183 * New version of aida2root from James Monk.
3185 2011-07-29 Frank Siegert <frank.siegert@cern.ch>
3187 * Fix implementation of --config file option in make-plots.
3189 2011-07-27 David Mallows <dave.mallows@gmail.com>
3191 * Updated MC_TTBAR.plot to reflect updated analysis.
3193 2011-07-25 Andy Buckley <andy@insectnation.org>
3195 * Adding a useTransverseMass flag method and implementation to
3196 InvMassFinalState, and using it in the WFinder, after feedback
3197 from Gavin Hesketh. This was the neatest way I could do it :S Some
3198 other tidying up happened along the way.
3200 * Adding transverse mass massT and massT2 methods and functions
3201 for FourMomentum.
3203 2011-07-22 Frank Siegert <frank.siegert@cern.ch>
3205 * Added ATLAS_2011_S9120807
3207 * Add two more observables to MC_DIPHOTON and make its isolation cut
3208 more LHC-like
3210 * Add linear photon pT histo to MC_PHOTONJETS
3212 2011-07-20 Andy Buckley <andy@insectnation.org>
3214 * Making MC_TTBAR work with semileptonic ttbar events and generally
3215 tidying the code.
3217 2011-07-19 Andy Buckley <andy@insectnation.org>
3219 * Version bump to 1.5.2.b01 in preparation for a release in the
3220 very near future.
3222 2011-07-18 David Mallows <dave.mallows@gmail.com>
3224 * Replaced MC_TTBAR: Added t,tbar reconstruction. Not yet working.
3226 2011-07-18 Andy Buckley <andy@insectnation.org>
3228 * bin/rivet-buildplugin.in: Pass the AM_CXXFLAGS
3229 variable (including the warning flags) to the C++ compiler when
3230 building user analysis plugins.
3232 * include/LWH/DataPointSet.h: Fix accidental setting of errorMinus
3233 = scalefactor * error_Plus_. Thanks to Anton Karneyeu for the bug
3234 report!
3236 2011-07-18 Hendrik Hoeth <hendrik.hoeth@cern.ch>
3238 * Added CMS_2011_S8884919 (charged hadron multiplicity in NSD
3239 events corrected to pT>=0).
3241 * Added CMS_2010_S8656010 and CMS_2010_S8547297 (charged
3242 hadron pT and eta in NSD events)
3244 * Added CMS_2011_S8968497 (chi_dijet)
3246 * Added CMS_2011_S8978280 (strangeness)
3248 2011-07-13 Andy Buckley <andy@insectnation.org>
3250 * Rivet PDF manual updates, to not spread disinformation about
3251 bootstrapping a Genser repo.
3253 2011-07-12 Andy Buckley <andy@insectnation.org>
3255 * bin/make-plots: Protect property reading against unstripped \r
3256 characters from DOS newlines.
3258 * bin/rivet-mkhtml: Add a -M unmatch regex flag (note that these
3259 are matching the analysis path rather than individual histos on
3260 this script), and speed up the initial analysis identification and
3261 selection by avoiding loops of regex comparisons for repeats of
3262 strings which have already been analysed.
3264 * bin/compare-histos: remove the completely (?) unused histogram
3265 list, and add -m and -M regex flags, as for aida2flat and
3266 flat2aida.
3268 2011-06-30 Hendrik Hoeth <hendrik.hoeth@cern.ch>
3270 * fix fromFlat() in lighthistos: It would ignore histogram paths
3271 before.
3273 * flat2aida: preserve histogram order from .dat files
3275 2011-06-27 Andy Buckley <andy@insectnation.org>
3277 * pyext/setup.py.in: Use CXXFLAGS and LDFLAGS safely in the Python
3278 extension build, and improve the use of build/src directory
3279 arguments.
3281 2011-06-23 Andy Buckley <andy@insectnation.org>
3283 * Adding a tentative rivet-updateanalyses script, based on
3284 lhapdf-getdata, which will download new analyses as requested. We
3285 could change our analysis-providing behaviour a bit to allow this
3286 sort of delivery mechanism to be used as the normal way of getting
3287 analysis updates without us having to make a whole new Rivet
3288 release. It is nice to be able to identify analyses with releases,
3289 though, for tracking whether bugs have been addressed.
3291 2011-06-10 Frank Siegert <frank.siegert@cern.ch>
3293 * Bugfixes in WFinder.
3295 2011-06-10 Andy Buckley <andy@insectnation.org>
3297 * Adding \physicsxcoor and \physicsycoor treatment to make-plots.
3299 2011-06-06 Hendrik Hoeth <hendrik.hoeth@cern.ch>
3301 * Allow for negative cross-sections. NLO tools need this.
3303 * make-plots: For RatioPlotMode=deviation also consider the MC
3304 uncertainties, not just data.
3306 2011-06-04 Hendrik Hoeth <hendrik.hoeth@cern.ch>
3308 * Add support for goodness-of-fit calculations to make-plots.
3309 The results are shown in the legend, and one histogram can
3310 be selected to determine the color of the plot margin. See
3311 the documentation for more details.
3313 2011-06-04 Andy Buckley <andy@insectnation.org>
3315 * Adding auto conversion of Histogram2D to DataPointSets in the
3316 AnalysisHandler _normalizeTree method.
3318 2011-06-03 Andy Buckley <andy@insectnation.org>
3320 * Adding a file-weight feature to the Run object, which will
3321 optionally rescale the weights in the provided HepMC files. This
3322 should be useful for e.g. running on multiple differently-weighted
3323 AlpGen HepMC files/streams. The new functionality is used by the
3324 rivet command via an optional weight appended to the filename with
3325 a colon delimiter, e.g. "rivet fifo1.hepmc fifo2.hepmc:2.31"
3327 2011-06-01 Hendrik Hoeth <hendrik.hoeth@cern.ch>
3329 * Add BeamThrust projection
3331 2011-05-31 Hendrik Hoeth <hendrik.hoeth@cern.ch>
3333 * Fix LIBS for fastjet-3.0
3335 * Add basic infrastructure for Taylor plots in make-plots
3337 * Fix OPAL_2004_S6132243: They are using charged+neutral.
3339 * Release 1.5.1
3341 2011-05-22 Andy Buckley <andy@insectnation.org>
3343 * Adding plots of stable and decayed PID multiplicities to
3344 MC_GENERIC (useful for sanity-checking generator setups).
3346 * Removing actually-unused ProjectionApplier.fhh forward
3347 declaration header.
3349 2011-05-20 Andy Buckley <andy@insectnation.org>
3351 * Removing import of ipython shell from rivet-rescale, having just
3352 seen it throw a multi-coloured warning message on a student's
3353 lxplus Rivet session!
3355 * Adding support for the compare-histos --no-ratio flag when using
3356 rivet-mkhtml. Adding --rel-ratio, --linear, etc. is an exercise
3357 for the enthusiast ;-)
3359 2011-05-10 Andy Buckley <andy@insectnation.org>
3361 * Internal minor changes to the ProjectionHandler and
3362 ProjectionApplier interfaces, in particular changing the
3363 ProjectionHandler::create() function to be called getInstance and
3364 to return a reference rather than a pointer. The reference change
3365 is to make way for an improved singleton implementation, which
3366 cannot yet be used due to a bug in projection memory
3367 management. The code of the improved singleton is available, but
3368 commented out, in ProjectionManager.hh to allow for easier
3369 migration and to avoid branching.
3371 2011-05-08 Andy Buckley <andy@insectnation.org>
3373 * Extending flat2aida to be able to read from and write to
3374 stdin/out as for aida2flat, and also eliminating the internal
3375 histo parsing representation in favour of the one in
3376 lighthisto. lighthisto's fromFlat also needed a bit of an
3377 overhaul: it has been extended to parse each histo's chunk of
3378 text (including BEGIN and END lines) in fromFlatHisto, and for
3379 fromFlat to parse a collection of histos from a file, in keeping
3380 with the behaviour of fromDPS/fromAIDA. Merging into Professor is
3381 now needed.
3383 * Extending aida2flat to have a better usage message, to accept
3384 input from stdin for command chaining via pipes, and to be a bit
3385 more sensibly internally structured (although it also now has to
3386 hold all histos in memory before writing out -- that shouldn't be
3387 a problem for anything other than truly huge histo files).
3389 2011-05-04 Andy Buckley <andy@insectnation.org>
3391 * compare-histos: If using --mc-errs style, prefer dotted and
3392 dashdotted line styles to dashed, since dashes are often too long
3393 to be distinguishable from solid lines. Even better might be to
3394 always use a solid line for MC errs style, and to add more colours.
3396 * rivet-mkhtml: use a no-mc-errors drawing style by default,
3397 to match the behaviour of compare-histos, which it calls. The
3398 --no-mc-errs option has been replaced with an --mc-errs option.
3400 2011-05-04 Hendrik Hoeth <hendrik.hoeth@cern.ch>
3402 * Ignore duplicate files in compare-histos.
3404 2011-04-25 Andy Buckley <andy@insectnation.org>
3406 * Adding some hadron-specific N and sumET vs. |eta| plots to MC_GENERIC.
3408 * Re-adding an explicit attempt to get the beam particles, since
3409 HepMC's IO_HERWIG seems to not always set them even though it's
3410 meant to.
3412 2011-04-19 Hendrik Hoeth <hendrik.hoeth@cern.ch>
3414 * Added ATLAS_2011_S9002537 W asymmetry analysis
3416 2011-04-14 Hendrik Hoeth <hendrik.hoeth@cern.ch>
3418 * deltaR, deltaPhi, deltaEta now available in all combinations of
3419 FourVector, FourMomentum, Vector3, doubles. They also accept jets
3420 and particles as arguments now.
3422 2011-04-13 David Grellscheid <david.grellscheid@durham.ac.uk>
3424 * added ATLAS 8983313: 0-lepton BSM
3426 2011-04-01 Andy Buckley <andy@insectnation.org>
3428 * bin/rivet-mkanalysis: Don't try to download SPIRES or HepData
3429 info if it's not a standard analysis (i.e. if the SPIRES ID is not
3430 known), and make the default .info file validly parseable by YAML,
3431 which was an unfortunate gotcha for anyone writing a first
3432 analysis.
3434 2011-03-31 Andy Buckley <andy@insectnation.org>
3436 * bin/compare-histos: Write more appropriate ratio plot labels
3437 when not comparing to data, and use the default make-plots labels
3438 when comparing to data.
3440 * bin/rivet-mkhtml: Adding a timestamp to the generated pages, and
3441 a -t/--title option to allow setting the main HTML page title on
3442 the command line: otherwise it becomes impossible to tell these
3443 pages apart when you have a lot of them, except by URL!
3445 2011-03-24 Andy Buckley <andy@insectnation.org>
3447 * bin/aida2flat: Adding a -M option to *exclude* histograms whose
3448 paths match a regex. Writing a negative lookahead regex with
3449 positive matching was far too awkward!
3451 2011-03-18 Leif Lonnblad <Leif.Lonnblad@thep.lu.se>
3453 * src/Core/AnalysisHandler.cc (AnalysisHandler::removeAnalysis):
3454 Fixed strange shared pointer assignment that caused seg-fault.
3456 2011-03-13 Hendrik Hoeth <hendrik.hoeth@cern.ch>
3458 * filling of functions works now in a more intuitive way (I hope).
3460 2011-03-09 Andy Buckley <andy@insectnation.org>
3462 * Version 1.5.0 release!
3464 2011-03-08 Andy Buckley <andy@insectnation.org>
3466 * Adding some extra checks for external packages in make-plots.
3468 2011-03-07 Andy Buckley <andy@insectnation.org>
3470 * Changing the accuracy of the beam energy checking to 1%, to make
3471 the UI a bit more forgiving. It's still best to specify exactly the right
3472 energy of course!
3474 2011-03-01 Andy Buckley <andy@insectnation.org>
3476 * Adding --no-plottitle to compare-histos (+ completion).
3478 * Fixing segfaults in UA1_1990_S2044935 and UA5_1982_S875503.
3480 * Bump ABI version numbers for 1.5.0 release.
3482 * Use AnalysisInfo for storage of the NeedsCrossSection analysis flag.
3484 * Allow field setting in AnalysisInfo.
3486 2011-02-27 Hendrik Hoeth <hendrik.hoeth@cern.ch>
3488 * Support LineStyle=dashdotted in make-plots
3490 * New command line option --style for compare-histos. Options are
3491 "default", "bw" and "talk".
3493 * cleaner uninstall
3495 2011-02-26 Andy Buckley <andy@insectnation.org>
3497 * Changing internal storage and return type of Particle::pdgId()
3498 to PdgId, and adding Particle::energy().
3500 * Renaming Analysis::energies() as Analysis::requiredEnergies().
3502 * Adding beam energies into beam consistency checking:
3503 Analysis::isCompatible methods now also require the beam energies
3504 to be provided.
3506 * Removing long-deprecated AnalysisHandler::init() constructor and
3507 AnalysisHandler::removeIncompatibleAnalyses() methods.
3509 2011-02-25 Andy Buckley <andy@insectnation.org>
3511 * Adding --disable-obsolete, which takes its value from the value
3512 of --disable-preliminary by default.
3514 * Replacing RivetUnvalidated and RivetPreliminary plugin libraries
3515 with optionally-configured analysis contents in the
3516 experiment-specific plugin libraries. This avoids issues with
3517 making libraries rebuild consistently when sources were reassigned
3518 between libraries.
3520 2011-02-24 Andy Buckley <andy@insectnation.org>
3522 * Changing analysis plugin registration to fall back through
3523 available paths rather than have RIVET_ANALYSIS_PATH totally
3524 override the built-in paths. The first analysis hook of a given
3525 name to be found is now the one that's used: any duplicates found
3526 will be warned about but unused. getAnalysisLibPaths() now returns
3527 *all* the search paths, in keeping with the new search behaviour.
3529 2011-02-22 Andy Buckley <andy@insectnation.org>
3531 * Moving the definition of the MSG_* macros into the Logging.hh
3532 header. They can't be used everywhere, though, as they depend on
3533 the existence of a this->getLog() method in the call scope. This
3534 move makes them available in e.g. AnalysisHandler and other bits
3535 of framework other than projections and analyses.
3537 * Adding a gentle print-out from the Rivet AnalysisHandler if
3538 preliminary analyses are being used, and strengthening the current
3539 warning if unvalidated analyses are used.
3541 * Adding documentation about the validation "process" and
3542 the (un)validated and preliminary analysis statuses.
3544 * Adding the new RivetPreliminary analysis library, and the
3545 corresponding --disable-preliminary configure flag. Analyses in
3546 this library are subject to change names, histograms, reference
3547 data values, etc. between releases: make sure you check any
3548 dependences on these analyses when upgrading Rivet.
3550 * Change the Python script ref data search behaviours to use Rivet
3551 ref data by default where available, rather than requiring a -R
3552 option. Where relevant, -R is still a valid option, to avoid
3553 breaking legacy scripts, and there is a new --no-rivet-refs option
3554 to turn the default searching *off*.
3556 * Add the prepending and appending optional arguments to the path
3557 searching functions. This will make it easier to combine the
3558 search functions with user-supplied paths in Python scripts.
3560 * Make make-plots killable!
3562 * Adding Rivet version to top of run printout.
3564 * Adding Run::crossSection() and printing out the cross-section in
3565 pb at the end of a Rivet run.
3567 2011-02-22 Hendrik Hoeth <hendrik.hoeth@cern.ch>
3569 * Make lighthisto.py aware of 2D histograms
3571 * Adding published versions of the CDF_2008 leading jets and DY
3572 analyses, and marking the preliminary ones as "OBSOLETE".
3574 2011-02-21 Andy Buckley <andy@insectnation.org>
3576 * Adding PDF documentation for path searching and .info/.plot
3577 files, and tidying overfull lines.
3579 * Removing unneeded const declarations from various return by
3580 value path and internal binning functions. Should not affect ABI
3581 compatibility but will force recompilation of external packages
3582 using the RivetPaths.hh and Utils.hh headers.
3584 * Adding findAnalysis*File(fname) functions, to be used by Rivet
3585 scripts and external programs to find files known to Rivet
3586 according to Rivet's (newly standard) lookup rule.
3588 * Changing search path function behaviour to always return *all*
3589 search directories rather than overriding the built-in locations
3590 if the environment variables are set.
3592 2011-02-20 Andy Buckley <andy@insectnation.org>
3594 * Adding the ATLAS 2011 transverse jet shapes analysis.
3596 2011-02-18 Hendrik Hoeth <hendrik.hoeth@cern.ch>
3598 * Support for transparency in make-plots
3600 2011-02-18 Frank Siegert <frank.siegert@cern.ch>
3602 * Added ATLAS prompt photon analysis ATLAS_2010_S8914702
3604 2011-02-10 Hendrik Hoeth <hendrik.hoeth@cern.ch>
3606 * Simple NOOP constructor for Thrust projection
3608 * Add CMS event shape analysis. Data read off the plots. We
3609 will get the final numbers when the paper is accepted by
3610 the journal.
3612 2011-02-10 Frank Siegert <frank.siegert@cern.ch>
3614 * Add final version of ATLAS dijet azimuthal decorrelation
3616 2011-02-10 Hendrik Hoeth <hendrik.hoeth@cern.ch>
3618 * remove ATLAS conf note analyses for which we have final data
3619 * reshuffle histograms in ATLAS minbias analysis to match Hepdata
3620 * small pT-cut fix in ATLAS track based UE analysis
3622 2011-01-31 Andy Buckley <andy@insectnation.org>
3624 * Doc tweaks and adding cmp-by-|p| functions for Jets, to match
3625 those added by Hendrik for Particles.
3627 * Don't sum photons around muons in the D0 2010 Z pT analysis.
3629 2011-01-27 Andy Buckley <andy@insectnation.org>
3631 * Adding ATLAS 2010 min bias and underlying event analyses and data.
3633 2011-01-23 Andy Buckley <andy@insectnation.org>
3635 * Make make-plots write out PDF rather than PS by default.
3637 2011-01-12 Andy Buckley <andy@insectnation.org>
3639 * Fix several rendering and comparison bugs in rivet-mkhtml.
3641 * Allow make-plots to write into an existing directory, at the
3642 user's own risk.
3644 * Make rivet-mkhtml produce PDF-based output rather than PS by
3645 default (most people want PDF these days). Can we do the same
3646 change of default for make-plots?
3648 * Add getAnalysisPlotPaths() function, and use it in compare-histos
3650 * Use proper .info file search path function internally in AnalysisInfo::make.
3652 2011-01-11 Andy Buckley <andy@insectnation.org>
3654 * Clean up ATLAS dijet analysis.
3656 2010-12-30 Andy Buckley <andy@insectnation.org>
3658 * Adding a run timeout option, and small bug-fixes to the event
3659 timeout handling, and making first event timeout work nicely with
3660 the run timeout. Run timeout is intended to be used in conjunction
3661 with timed batch token expiry, of the type that likes to make 0
3662 byte AIDA files on LCG when Grid proxies time out.
3664 2010-12-21 Andy Buckley <andy@insectnation.org>
3666 * Fix the cuts in the CDF 1994 colour coherence analysis.
3668 2010-12-19 Andy Buckley <andy@insectnation.org>
3670 * Fixing CDF midpoint cone jet algorithm default construction to
3671 have an overlap threshold of 0.5 rather than 0.75. This was
3672 recommended by the FastJet manual, and noticed while adding the
3673 ATLAS and CMS cones.
3675 * Adding ATLAS and CMS old iterative cones as "official" FastJets
3676 constructor options (they could always have been used by explicit
3677 instantiation and attachment of a Fastjet plugin object).
3679 * Removing defunct and unused ClosestJetShape projection.
3681 2010-12-16 Andy Buckley <andy@insectnation.org>
3683 * bin/compare-histos, pyext/lighthisto.py: Take ref paths from
3684 rivet module API rather than getting the environment by hand.
3686 * pyext/lighthisto.py: Only read .plot info from the first
3687 matching file (speed-up compare-histos).
3689 2010-12-14 Andy Buckley <andy@insectnation.org>
3691 * Augmenting the physics vector functionality to make FourMomentum
3692 support maths operators with the correct return type (FourMomentum
3693 rather than FourVector).
3695 2010-12-11 Andy Buckley <andy@insectnation.org>
3697 * Adding a --event-timeout option to control the event timeout,
3698 adding it to the completion script, and making sure that the init
3699 time check is turned OFF once successful!
3701 * Adding an 3600 second timeout for initialising an event file. If
3702 it takes longer than (or anywhere close to) this long, chances are
3703 that the event source is inactive for some reason (perhaps
3704 accidentally unspecified and stdin is not active, or the event
3705 generator has died at the other end of the pipe. The reason for
3706 not making it something shorter is that e.g. Herwig++ or Sherpa
3707 can have long initialisation times to set up the MPI handler or to
3708 run the matrix element integration. An timeout after an hour is
3709 still better than a batch job which runs for two days before you
3710 realise that you forgot to generate any events!
3712 2010-12-10 Andy Buckley <andy@insectnation.org>
3714 * Fixing unbooked-histo segfault in UA1_1990_S2044935 at 63 GeV.
3716 2010-12-08 Hendrik Hoeth <hendrik.hoeth@cern.ch>
3718 * Fixes in ATLAS_2010_CONF_083, declaring it validated
3720 * Added ATLAS_2010_CONF_046, only two plots are implemented.
3721 The paper will be out soon, and we don't need the other plots
3722 right now. Data is read off the plots in the note.
3724 * New option "SmoothLine" for HISTOGRAM sections in make-plots
3726 * Changed CustomTicks to CustomMajorTicks and added CustomMinorTicks
3727 in make-plots.
3729 2010-12-07 Andy Buckley <andy@insectnation.org>
3731 * Update the documentation to explain this latest bump to path
3732 lookup behaviours.
3734 * Various improvements to existing path lookups. In particular,
3735 the analysis lib path locations are added to the info and ref
3736 paths to avoid having to set three variables when you have all
3737 three file types in the same personal plugin directory.
3739 * Adding setAnalysisLibPaths and addAnalysisLibPath
3740 functions. rivet --analysis-path{,-append} now use these and work
3741 correctly. Hurrah!
3743 * Add --show-analyses as an alias for --show-analysis, following a
3744 comment at the ATLAS tutorial.
3746 2010-12-07 Hendrik Hoeth <hendrik.hoeth@cern.ch>
3748 * Change LegendXPos behaviour in make-plots. Now the top left
3749 corner of the legend is used as anchor point.
3751 2010-12-03 Andy Buckley <andy@insectnation.org>
3753 * 1.4.0 release.
3755 * Add bin-skipping to compare-histos to avoid one use of
3756 rivet-rmgaps (it's still needed for non-plotting post-processing
3757 like Professor).
3759 2010-12-03 Hendrik Hoeth <hendrik.hoeth@cern.ch>
3761 * Fix normalisation issues in UA5 and ALEPH analyses
3763 2010-11-27 Andy Buckley <andy@insectnation.org>
3765 * MathUtils.hh: Adding fuzzyGtrEquals and fuzzyLessEquals, and
3766 tidying up the math utils collection a bit.
3768 * CDF 1994 colour coherence analysis overhauled and
3769 correction/norm factors fixed. Moved to VALIDATED status.
3771 * Adding programmable completion for aida2flat and flat2aida.
3773 * Improvements to programmable completion using the neat _filedir
3774 completion shell function which I just discovered.
3776 2010-11-26 Andy Buckley <andy@insectnation.org>
3778 * Tweak to floating point inRange to use fuzzyEquals for CLOSED
3779 interval equality comparisons.
3781 * Some BibTeX generation improvements, and fixing the ATLAS dijet
3782 BibTeX key.
3784 * Resolution upgrade in PNG make-plots output.
3786 * CDF_2005_S6217184.cc, CDF_2008_S7782535.cc: Updates to use the
3787 new per-jet JetAlg interface (and some other fixes).
3789 * JetAlg.cc: Changed the interface on request to return per-jet
3790 rather than per-event jet shapes, with an extra jet index argument.
3792 * MathUtils.hh: Adding index_between(...) function, which is handy
3793 for working out which bin a value falls in, given a set of bin edges.
3795 2010-11-25 Andy Buckley <andy@insectnation.org>
3797 * Cmp.hh: Adding ASC/DESC (and ANTISORTED) as preferred
3798 non-EQUIVALENT enum value synonyms over misleading
3799 SORTED/UNSORTED.
3801 * Change of rapidity scheme enum name to RapScheme
3803 * Reworking JetShape a bit further: constructor args now avoid
3804 inconsistencies (it was previously possible to define incompatible
3805 range-ends and interval). Internal binning implementation also
3806 reworked to use a vector of bin edges: the bin details are
3807 available via the interface. The general jet pT cuts can be
3808 applied via the JetShape constructor.
3810 * MathUtils.hh: Adding linspace and logspace utility
3811 functions. Useful for defining binnings.
3813 * Adding more general cuts on jet pT and (pseudo)rapidity.
3815 2010-11-11 Andy Buckley <andy@insectnation.org>
3817 * Adding special handling of FourMomentum::mass() for computed
3818 zero-mass vectors for which mass2 can go (very slightly) negative
3819 due to numerical precision.
3821 2010-11-10 Hendrik Hoeth <hendrik.hoeth@cern.ch>
3823 * Adding ATLAS-CONF-2010-083 conference note. Data is read from plots.
3824 When I run Pythia 6 the bins close to pi/2 are higher than in the note,
3825 so I call this "unvalidated". But then ... the note doesn't specify
3826 a tune or even just a version for the generators in the plots. Not even
3827 if they used Pythia 6 or Pythia 8. Probably 6, since they mention AGILe.
3829 2010-11-10 Andy Buckley <andy@insectnation.org>
3831 * Adding a JetAlg::useInvisibles(bool) mechanism to allow ATLAS
3832 jet studies to include neutrinos. Anyone who chooses to use this
3833 mechanism had better be careful to remove hard neutrinos manually
3834 in the provided FinalState object.
3836 2010-11-09 Hendrik Hoeth <hendrik.hoeth@cern.ch>
3838 * Adding ATLAS-CONF-2010-049 conference note. Data is read from plots.
3839 Fragmentation functions look good, but I can't reproduce the MC lines
3840 (or even the relative differences between them) in the jet cross-section
3841 plots. So consider those unvalidated for now. Oh, and it seems ATLAS
3842 screwed up the error bands in their ratio plots, too. They are
3843 upside-down.
3845 2010-11-07 Hendrik Hoeth <hendrik.hoeth@cern.ch>
3847 * Adding ATLAS-CONF-2010-081 conference note. Data is read from plots.
3849 2010-11-06 Andy Buckley <andy@insectnation.org>
3851 * Deprecating the old JetShape projection and renaming to
3852 ClosestJetShape: the algorithm has a tenuous relationship with
3853 that actually used in the CDF (and ATLAS) jet shape analyses. CDF
3854 analyses to be migrated to the new JetShape projection... and some
3855 of that projection's features, design elements, etc. to be
3856 finished off: we may as well take this opportunity to clear up
3857 what was one of our nastiest pieces of code.
3859 2010-11-05 Hendrik Hoeth <hendrik.hoeth@cern.ch>
3861 * Adding ATLAS-CONF-2010-031 conference note. Data is read from plots.
3863 2010-10-29 Andy Buckley <andy@insectnation.org>
3865 * Making rivet-buildplugin use the same C++ compiler and CXXFLAGS
3866 variable as used for the Rivet system build.
3868 * Fixing NeutralFinalState projection to, erm, actually select
3869 neutral particles (by Hendrik).
3871 * Allow passing a general FinalState reference to the JetShape
3872 projection, rather than requiring a VetoedFS.
3874 2010-10-07 Andy Buckley <andy@insectnation.org>
3876 * Adding a --with-root flag to rivet-buildplugin to add
3877 root-config --libs flags to the plugin build command.
3879 2010-09-24 Andy Buckley <andy@insectnation.org>
3881 * Releasing as Rivet 1.3.0.
3883 * Bundling underscore.sty to fix problems with running make-plots
3884 on dat files generated by compare-histos from AIDA files with
3885 underscores in their names.
3887 2010-09-16 Andy Buckley <andy@insectnation.org>
3889 * Fix error in N_effective definition for weighted profile errors.
3891 2010-08-18 Andy Buckley <andy@insectnation.org>
3893 * Adding MC_GENERIC analysis. NB. Frank Siegert also added MC_HJETS.
3895 2010-08-03 Andy Buckley <andy@insectnation.org>
3897 * Fixing compare-histos treatment of what is now a ref file, and
3898 speeding things up... again. What a mess!
3900 2010-08-02 Andy Buckley <andy@insectnation.org>
3902 * Adding rivet-nopy: a super-simple Rivet C++ command line
3903 interface which avoids Python to make profiling and debugging
3904 easier.
3906 * Adding graceful exception handling to the AnalysisHandler event
3907 loop methods.
3909 * Changing compare-histos behaviour to always show plots for which
3910 there is at least one MC histo. The default behaviour should now
3911 be the correct one in 99% of use cases.
3913 2010-07-30 Andy Buckley <andy@insectnation.org>
3915 * Merging in a fix for shared_ptrs not being compared for
3916 insertion into a set based on raw pointer value.
3918 2010-07-16 Andy Buckley <andy@insectnation.org>
3920 * Adding an explicit library dependency declaration on libHepMC,
3921 and hence removing the -lHepMC from the rivet-config --libs
3922 output.
3924 2010-07-14 Andy Buckley <andy@insectnation.org>
3926 * Adding a manual section on use of Rivet (and AGILe) as
3927 libraries, and how to use the -config scripts to aid compilation.
3929 * FastJets projection now allows setting of a jet area definition,
3930 plus a hacky mapping for getting the area-enabled cluster
3931 sequence. Requested by Pavel Starovoitov & Paolo Francavilla.
3933 * Lots of script updates in last two weeks!
3935 2010-06-30 Andy Buckley <andy@insectnation.org>
3937 * Minimising amount of Log class mapped into SWIG.
3939 * Making Python ext build checks fail with error rather than
3940 warning if it has been requested (or, rather, not explicitly
3941 disabled).
3943 2010-06-28 Andy Buckley <andy@insectnation.org>
3945 * Converting rivet Python module to be a package, with the dlopen
3946 flag setting etc. done around the SWIG generated core wrapper
3947 module (rivet.rivetwrap).
3949 * Requiring Python >= 2.4.0 in rivet scripts (and adding a Python
3950 version checker function to rivet module)
3952 * Adding --epspng option to make-plots (and converting to use subprocess.Popen).
3954 2010-06-27 Andy Buckley <andy@insectnation.org>
3956 * Converting JADE_OPAL analysis to use the fastjet
3957 exclusive_ymerge_*max* function, rather than just
3958 exclusive_ymerge: everything looks good now. It seems that fastjet
3959 >= 2.4.2 is needed for this to work properly.
3961 2010-06-24 Andy Buckley <andy@insectnation.org>
3963 * Making rivet-buildplugin look in its own bin directory when
3964 trying to find rivet-config.
3966 2010-06-23 Andy Buckley <andy@insectnation.org>
3968 * Adding protection and warning about numerical precision issues
3969 in jet mass calculation/histogramming to the MC_JetAnalysis
3970 analysis.
3972 * Numerical precision improvement in calculation of
3973 Vector4::mass2.
3975 * Adding relative scale ratio plot flag to compare-histos
3977 * Extended command completion to rivet-config, compare-histos, and
3978 make-plots.
3980 * Providing protected log messaging macros,
3981 MSG_{TRACE,DEBUG,INFO,WARNING,ERROR} cf. Athena.
3983 * Adding environment-aware functions for Rivet search path list access.
3985 2010-06-21 Andy Buckley <andy@insectnation.org>
3987 * Using .info file beam ID and energy info in HTML and LaTeX documentation.
3989 * Using .info file beam ID and energy info in command-line printout.
3991 * Fixing a couple of references to temporary variables in the
3992 analysis beam info, which had been introduced during refactoring:
3993 have reinstated reference-type returns as the more efficient
3994 solution. This should not affect API compatibility.
3996 * Making SWIG configure-time check include testing for
3997 incompatibilities with the C++ compiler (re. the recurring _const_
3998 char* literals issue).
4000 * Various tweaks to scripts: make-plots and compare-histos
4001 processes are now renamed (on Linux), rivet-config is avoided when
4002 computing the Rivet version,and RIVET_REF_PATH is also set using
4003 the rivet --analysis-path* flags. compare-histos now uses multiple
4004 ref data paths for .aida file globbing.
4006 * Hendrik changed VetoedFinalState comparison to always return
4007 UNDEFINED if vetoing on the results of other FS projections is
4008 being used. This is the only simple way to avoid problems
4009 emanating from the remainingFinalState thing.
4011 2010-06-19 Andy Buckley <andy@insectnation.org>
4013 * Adding --analysis-path and --analysis-path-append command-line
4014 flags to the rivet script, as a "persistent" way to set or extend
4015 the RIVET_ANALYSIS_PATH variable.
4017 * Changing -Q/-V script verbosity arguments to more standard
4018 -q/-v, after Hendrik moaned about it ;)
4020 * Small fix to TinyXML operator precendence: removes a warning,
4021 and I think fixes a small bug.
4023 * Adding plotinfo entries for new jet rapidity and jet mass plots
4024 in MC_JetAnalysis derivatives.
4026 * Moving MC_JetAnalysis base class into a new
4027 libRivetAnalysisTools library, with analysis base class and helper
4028 headers to be stored in the reinstated Rivet/Analyses include
4029 directory.
4031 2010-06-08 Andy Buckley <andy@insectnation.org>
4033 * Removing check for CEDARSTD #define guard, since we no longer
4034 compile against AGILe and don't have to be careful about
4035 duplication.
4037 * Moving crappy closest approach and decay significance functions
4038 from Utils into SVertex, which is the only place they have ever
4039 been used (and is itself almost entirely pointless).
4041 * Overhauling particle ID <-> name system to clear up ambiguities
4042 between enums, ints, particles and beams. There are no more enums,
4043 although the names are still available as const static ints, and
4044 names are now obtained via a singleton class which wraps an STL
4045 map for name/ID lookups in both directions.
4047 2010-05-18 Hendrik Hoeth <hendrik.hoeth@cern.ch>
4049 * Fixing factor-of-2 bug in the error calculation when scaling
4050 histograms.
4052 * Fixing D0_2001_S4674421 analysis.
4054 2010-05-11 Andy Buckley <andy@insectnation.org>
4056 * Replacing TotalVisibleMomentum with MissingMomentum in analyses
4057 and WFinder. Using vector ET rather than scalar ET in some places.
4059 2010-05-07 Andy Buckley <andy@insectnation.org>
4061 * Revamping the AnalysisHandler constructor and data writing, with
4062 some LWH/AIDA mangling to bypass the stupid AIDA idea of having to
4063 specify the sole output file and format when making the data
4064 tree. Preferred AnalysisHandler constructor now takes only one arg
4065 -- the runname -- and there is a new AH.writeData(outfile) method
4066 to replace AH.commitData(). Doing this now to begin migration to
4067 more flexible histogramming in the long term.
4069 2010-04-21 Hendrik Hoeth <hendrik.hoeth@cern.ch>
4071 * Fixing LaTeX problems (make-plots) on ancient machines, like lxplus.
4073 2010-04-29 Andy Buckley <andy@insectnation.org>
4075 * Fixing (I hope!) the treatment of weighted profile bin errors in LWH.
4077 2010-04-21 Andy Buckley <andy@insectnation.org>
4079 * Removing defunct and unused KtJets and Configuration classes.
4081 * Hiding some internal details from Doxygen.
4083 * Add @brief Doxygen comments to all analyses, projections and
4084 core classes which were missing them.
4086 2010-04-21 Hendrik Hoeth <hendrik.hoeth@cern.ch>
4088 * remove obsolete reference to InitialQuarks from DELPHI_2002
4089 * fix normalisation in CDF_2000_S4155203
4091 2010-04-20 Hendrik Hoeth <hendrik.hoeth@cern.ch>
4093 * bin/make-plots: real support for 2-dim histograms plotted as
4094 colormaps, updated the documentation accordingly.
4095 * fix misleading help comment in configure.ac
4097 2010-04-08 Andy Buckley <andy@insectnation.org>
4099 * bin/root2flat: Adding this little helper script, minimally
4100 modified from one which Holger Schulz made for internal use in
4101 ATLAS.
4103 2010-04-05 Andy Buckley <andy@insectnation.org>
4105 * Using spiresbib in rivet-mkanalysis: analysis templates made
4106 with rivet-mkanalysis will now contain a SPIRES-dumped BibTeX key
4107 and entry if possible!
4109 * Adding BibKey and BibTeX entries to analysis metadata files, and
4110 updating doc build to use them rather than the time-consuming
4111 SPIRES screen-scraping. Added SPIRES BibTeX dumps to all analysis
4112 metadata using new (uninstalled & unpackaged) doc/get-spires-data
4113 script hack.
4115 * Updating metadata files to add Energies, Beams and PtCuts
4116 entries to all of them.
4118 * Adding ToDo, NeedsCrossSection, and better treatment of Beams
4119 and Energies entries in metadata files and in AnalysisInfo and
4120 Analysis interfaces.
4122 2010-04-03 Andy Buckley <andy@insectnation.org>
4124 * Frank Siegert: Update of rivet-mkhtml to conform to improved
4125 compare-histos.
4127 * Frank Siegert: LWH output in precision-8 scientific notation, to
4128 solve a binning precision problem... the first time weve noticed a
4129 problem!
4131 * Improved treatment of data/reference datasets and labels in
4132 compare-histos.
4134 * Rewrite of rivet-mkanalysis in Python to make way for neat
4135 additions.
4137 * Improving SWIG tests, since once again the user's biuld system
4138 must include SWIG (no test to check that it's a 'good SWIG', since
4139 the meaning of that depends on which compiler is being used and we
4140 hope that the user system is consistent... evidence from Finkified
4141 Macs and bloody SLC5 notwithstanding).
4143 2010-03-23 Andy Buckley <andy@insectnation.org>
4145 * Tag as patch release 1.2.1.
4147 2010-03-22 Andy Buckley <andy@insectnation.org>
4149 * General tidying of return arguments and intentionally unused
4150 parameters to keep -Wextra happy (some complaints remain from
4151 TinyXML, FastJet, and HepMC).
4153 * Some extra bug fixes: in FastJets projection with explicit
4154 plugin argument, removing muon veto cut on FoxWolframMoments.
4156 * Adding UNUSED macro to help with places where compiler warnings
4157 can't be helped.
4159 * Turning on -Wextra warnings, and fixing some violations.
4161 2010-03-21 Andy Buckley <andy@insectnation.org>
4163 * Adding MissingMomentum projection, as replacement for ~all uses
4164 of now-deprecated TotalVisibleMomentum projection.
4166 * Fixing bug with TotalVisibleMomentum projection usage in MC_SUSY
4167 analysis.
4169 * Frank Siegert fixed major bug in pTmin param passing to FastJets
4170 projection. D'oh: requires patch release.
4172 2010-03-02 Andy Buckley <andy@insectnation.org>
4174 * Tagging for 1.2.0 release... at last!
4176 2010-03-01 Andy Buckley <andy@insectnation.org>
4178 * Updates to manual, manual generation scripts, analysis info etc.
4180 * Add HepData URL to metadata print-out with rivet --show-analysis
4182 * Fix average Et plot in UA1 analysis to only apply to the tracker
4183 acceptance (but to include neutral particle contributions,
4184 i.e. the region of the calorimeter in the tracker acceptance).
4186 * Use Et rather than pT in filling the scalar Et measure in
4187 TotalVisibleMomentum.
4189 * Fixes to UA1 normalisation (which is rather funny in the paper).
4191 2010-02-26 Andy Buckley <andy@insectnation.org>
4193 * Update WFinder to not place cuts and other restrictions on the
4194 neutrino.
4196 2010-02-11 Andy Buckley <andy@insectnation.org>
4198 * Change analysis loader behaviour to use ONLY RIVET_ANALYSIS_PATH
4199 locations if set, otherwise use ONLY the standard Rivet analysis
4200 install path. Should only impact users of personal plugin
4201 analyses, who should now explicitly set RIVET_ANALYSIS_PATH to
4202 load their analysis... and who can now create personal versions of
4203 standard analyses without getting an error message about duplicate
4204 loading.
4206 2010-01-15 Andy Buckley <andy@insectnation.org>
4208 * Add tests for "stable" heavy flavour hadrons in jets (rather
4209 than just testing for c/b hadrons in the ancestor lists of stable
4210 jet constituents)
4212 2009-12-23 Hendrik Hoeth <hendrik.hoeth@cern.ch>
4214 * New option "RatioPlotMode=deviation" in make-plots.
4216 2009-12-14 Hendrik Hoeth <hendrik.hoeth@cern.ch>
4218 * New option "MainPlot" in make-plots. For people who only want
4219 the ratio plot and nothing else.
4221 * New option "ConnectGaps" in make-plots. Set to 1 if you
4222 want to connect gaps in histograms with a line when ErrorBars=0.
4223 Works both in PLOT and in HISTOGRAM sections.
4225 * Eliminated global variables for coordinates in make-plots and
4226 enabled multithreading.
4228 2009-12-14 Andy Buckley <andy@insectnation.org>
4230 * AnalysisHandler::execute now calls AnalysisHandler::init(event)
4231 if it has not yet been initialised.
4233 * Adding more beam configuration features to Beam and
4234 AnalysisHandler: the setRunBeams(...) methods on the latter now
4235 allows a beam configuration for the run to be specified without
4236 using the Run class.
4238 2009-12-11 Andy Buckley <andy@insectnation.org>
4240 * Removing use of PVertex from few remaining analyses. Still used
4241 by SVertex, which is itself hardly used and could maybe be
4242 removed...
4244 2009-12-10 Andy Buckley <andy@insectnation.org>
4246 * Updating JADE_OPAL to do the histo booking in init(), since
4247 sqrtS() is now available at that stage.
4249 * Renaming and slightly re-engineering all MC_*_* analyses to not
4250 be collider-specific (now the Analysis::sqrtS/beams()) methods
4251 mean that histograms can be dynamically binned.
4253 * Creating RivetUnvalidated.so plugin library for unvalidated
4254 analyses. Unvalidated analyses now need to be explicitly enabled
4255 with a --enable-unvalidated flag on the configure script.
4257 * Various min bias analyses updated and validated.
4259 2009-12-10 Hendrik Hoeth <hendrik.hoeth@cern.ch>
4261 * Propagate SPECIAL and HISTOGRAM sections from .plot files
4262 through compare-histos
4264 * STAR_2006_S6860818: <pT> vs particle mass, validate analysis
4266 2009-12-04 Andy Buckley <andy@insectnation.org>
4268 * Use scaling rather than normalising in DELPHI_1996: this is
4269 generally desirable, since normalizing to 1 for 1/sig dsig/dx
4270 observables isn't correct if any events fall outside the histo
4271 bounds.
4273 * Many fixes to OPAL_2004.
4275 * Improved Hemispheres interface to remove unnecessary consts on
4276 returned doubles, and to also return non-squared versions
4277 of (scaled) hemisphere masses.
4279 * Add "make pyclean" make target at the top level to make it
4280 easier for developers to clean their Python module build when the
4281 API is extended.
4283 * Identify use of unvalidated analyses with a warning message at
4284 runtime.
4286 * Providing Analysis::sqrtS() and Analysis::beams(), and making
4287 sure they're available by the time the init methods are called.
4289 2009-12-02 Andy Buckley <andy@insectnation.org>
4291 * Adding passing of first event sqrt(s) and beams to analysis handler.
4293 * Restructuring running to only use one HepMC input file (no-one
4294 was using multiple ones, right?) and to break down the Run class
4295 to cleanly separate the init and event loop phases. End of file is
4296 now neater.
4298 2009-12-01 Andy Buckley <andy@insectnation.org>
4300 * Adding parsing of beam types and pairs of energies from YAML.
4302 2009-12-01 Hendrik Hoeth <hendrik.hoeth@cern.ch>
4304 * Fixing trigger efficiency in CDF_2009_S8233977
4306 2009-11-30 Andy Buckley <andy@insectnation.org>
4308 * Using shared pointers to make I/O object memory management
4309 neater and less error-prone.
4311 * Adding crossSectionPerEvent() method [==
4312 crossSection()/sumOfWeights()] to Analysis. Useful for histogram
4313 scaling since numerator of sumW_passed/sumW_total (to calculate
4314 pass-cuts xsec) is cancelled by dividing histo by sumW_passed.
4316 * Clean-up of Particle class and provision of inline PID::
4317 functions which take a Particle as an argument to avoid having to
4318 explicitly call the Particle::pdgId() method.
4320 2009-11-30 Hendrik Hoeth <hendrik.hoeth@cern.ch>
4322 * Fixing division by zero in Profile1D bin errors for
4323 bins with just a single entry.
4325 2009-11-24 Hendrik Hoeth <hendrik.hoeth@cern.ch>
4327 * First working version of STAR_2006_S6860818
4329 2009-11-23 Hendrik Hoeth <hendrik.hoeth@cern.ch>
4331 * Adding missing CDF_2001_S4751469 plots to uemerge
4332 * New "ShowZero" option in make-plots
4333 * Improving lots of plot defaults
4334 * Fixing typos / non-existing bins in CDF_2001_S4751469 and
4335 CDF_2004_S5839831 reference data
4337 2009-11-19 Hendrik Hoeth <hendrik.hoeth@cern.ch>
4339 * Fixing our compare() for doubles.
4341 2009-11-17 Hendrik Hoeth <hendrik.hoeth@cern.ch>
4343 * Zeroth version of STAR_2006_S6860818 analysis (identified
4344 strange particles). Not working yet for unstable particles.
4346 2009-11-11 Andy Buckley <andy@insectnation.org>
4348 * Adding separate jet-oriented and photon-oriented observables to
4349 MC PHOTONJETUE analysis.
4351 * Bug fix in MC leading jets analysis, and general tidying of
4352 leading jet analyses to insert units, etc. (should not affect any
4353 current results)
4355 2009-11-10 Hendrik Hoeth <hendrik.hoeth@cern.ch>
4357 * Fixing last issues in STAR_2006_S6500200 and setting it to
4358 VALIDATED.
4359 * Noramlise STAR_2006_S6870392 to cross-section
4361 2009-11-09 Andy Buckley <andy@insectnation.org>
4363 * Overhaul of jet caching and ParticleBase interface.
4365 * Adding lists of analyses' histograms (obtained by scanning the
4366 plot info files) to the LaTeX documentation.
4368 2009-11-07 Andy Buckley <andy@insectnation.org>
4370 * Adding checking system to ensure that Projections aren't
4371 registered before the init phase of analyses.
4373 * Now that the ProjHandler isn't full of defunct pointers (which
4374 tend to coincidentally point to *new* Projection pointers rather
4375 than undefined memory, hence it wasn't noticed until recently!),
4376 use of a duplicate projection name is now banned with a helpful
4377 message at runtime.
4379 * (Huge) overhaul of ProjectionHandler system to use shared_ptr:
4380 projections are now deleted much more efficiently, naturally
4381 cleaning themselves out of the central repository as they go out
4382 of scope.
4384 2009-11-06 Andy Buckley <andy@insectnation.org>
4386 * Adding Cmp<double> specialisation, using fuzzyEquals().
4388 2009-11-05 Hendrik Hoeth <hendrik.hoeth@cern.ch>
4390 * Fixing histogram division code.
4392 2009-11-04 Hendrik Hoeth <hendrik.hoeth@cern.ch>
4394 * New analysis STAR_2006_S6500200 (pion and proton pT spectra in
4395 pp collisions at 200 GeV). It is still unclear if they used a cut
4396 in rapidity or pseudorapidity, thus the analysis is declared
4397 "UNDER DEVELOPMENT" and "DO NOT USE".
4398 * Fixing compare() in NeutralFinalState and MergedFinalState
4400 2009-11-04 Andy Buckley <andy@insectnation.org>
4402 * Adding consistence checking on beam ID and sqrt(s) vs. those
4403 from first event.
4405 2009-11-03 Andy Buckley <andy@insectnation.org>
4407 * Adding more assertion checks to linear algebra testing.
4409 2009-11-02 Hendrik Hoeth <hendrik.hoeth@cern.ch>
4411 * Fixing normalisation issue with stacked histograms in
4412 make-plots.
4414 2009-10-30 Hendrik Hoeth <hendrik.hoeth@cern.ch>
4416 * CDF_2009_S8233977: Updating data and axes labels to match final
4417 paper. Normalise to cross-section instead of data.
4419 2009-10-23 Andy Buckley <andy@insectnation.org>
4421 * Fixing Cheese-3 plot in CDF 2004... at last!
4423 2009-10-23 Hendrik Hoeth <hendrik.hoeth@cern.ch>
4425 * Fix muon veto in CDF_1994_S2952106, CDF_2005_S6217184,
4426 CDF_2008_S7782535, and D0_2004_S5992206
4428 2009-10-19 Andy Buckley <andy@insectnation.org>
4430 * Adding analysis info files for MC SUSY and PHOTONJETUE analyses.
4432 * Adding MC UE analysis in photon+jet events.
4434 2009-10-19 Hendrik Hoeth <hendrik.hoeth@cern.ch>
4436 * Adding new NeutralFinalState projection. Note that this final
4437 state takes E_T instead of p_T as argument (makes more sense for
4438 neutral particles). The compare() method does not yet work as
4439 expected (E_T comparison still missing).
4441 * Adding new MergedFinalState projection. This merges two final
4442 states, removing duplicate particles. Duplicates are identified by
4443 looking at the genParticle(), so users need to take care of any
4444 manually added particles themselves.
4446 * Fixing most open issues with the STAR_2009_UE_HELEN analysis.
4447 There is only one question left, regarding the away region.
4449 * Set the default split-merge value for SISCone in our FastJets
4450 projection to the recommended (but not Fastjet-default!) value of
4451 0.75.
4453 2009-10-17 Andy Buckley <andy@insectnation.org>
4455 * Adding parsing of units in cross-sections passed to the "-x"
4456 flag, i.e. "-x 101 mb" is parsed internally into 1.01e11 pb.
4458 2009-10-16 Hendrik Hoeth <hendrik.hoeth@cern.ch>
4460 * Disabling DELPHI_2003_WUD_03_11 in the Makefiles, since I don't
4461 trust the data.
4463 * Getting STAR_2009_UE_HELEN to work.
4465 2009-10-04 Andy Buckley <andy@insectnation.org>
4467 * Adding triggers and other tidying to (still unvalidated)
4468 UA1_1990 analysis.
4470 * Fixing definition of UA5 trigger to not be intrinscally
4471 different for pp and ppbar: this is corrected for (although it
4472 takes some readng to work this out) in the 1982 paper, which I
4473 think is the only one to compare the two modes.
4475 * Moving projection setup and registration into init() method for
4476 remaining analyses.
4478 * Adding trigger implementations as projections for CDF Runs 0 &
4479 1, and for UA5.
4481 2009-10-01 Andy Buckley <andy.buckley@cern.ch>
4483 * Moving projection setup and registration into init() method for
4484 analyses from ALEPH, CDF and the MC_ group.
4486 * Adding generic SUSY validation analysis, based on plots used in
4487 ATLAS Herwig++ validation.
4489 * Adding sorted particle accessors to FinalState (cf. JetAlg).
4491 2009-09-29 Andy Buckley <andy@insectnation.org>
4493 * Adding optional use of args as regex match expressions with
4494 -l/--list-analyses.
4496 2009-09-03 Andy Buckley <andy.buckley@cern.ch>
4498 * Passing GSL include path to compiler, since its absence was
4499 breaking builds on systems with no GSL installation in a standard
4500 location (such as SLC5, for some mysterious reason!)
4502 * Removing lib extension passing to compiler from the configure
4503 script, because Macs and Linux now both use .so extensions for the
4504 plugin analysis modules.
4506 2009-09-02 Andy Buckley <andy@insectnation.org>
4508 * Adding analysis info file path search with RIVET_DATA_PATH
4509 variable (and using this to fix doc build.)
4511 * Improvements to AnalysisLoader path search.
4513 * Moving analysis sources back into single directory, after a
4514 proletarian uprising ;)
4516 2009-09-01 Andy Buckley <andy@insectnation.org>
4518 * Adding WFinder and WAnalysis, based on Z proj and analysis, with
4519 some tidying of the Z code.
4521 * ClusteredPhotons now uses an IdentifiedFS to pick the photons to
4522 be looped over, and only clusters photons around *charged* signal
4523 particles.
4525 2009-08-31 Andy Buckley <andy@insectnation.org>
4527 * Splitting analyses by directory, to make it easier to disable
4528 building of particular analysis group plugin libs.
4530 * Removing/merging headers for all analyses except for the special
4531 MC_JetAnalysis base class.
4533 * Exit with an error message if addProjection is used twice from
4534 the same parent with distinct projections.
4536 2009-08-28 Andy Buckley <andy@insectnation.org>
4538 * Changed naming convention for analysis plugin libraries, since
4539 the loader has changed so much: they must now *start* with the
4540 word "Rivet" (i.e. no lib prefix).
4542 * Split standard plugin analyses into several plugin libraries:
4543 these will eventually move into separate subdirs for extra build
4544 convenience.
4546 * Started merging analysis headers into the source files, now that
4547 we can (the plugin hooks previously forbade this).
4549 * Replacement of analysis loader system with a new one based on
4550 ideas from ThePEG, which uses dlopen-time instantiation of
4551 templated global variables to reduce boilerplate plugin hooks to
4552 one line in analyses.
4554 2009-07-14 Frank Siegert <frank.siegert@durham.ac.uk>
4556 * Replacing in-source histo-booking metadata with .plot files.
4558 2009-07-14 Andy Buckley <andy@insectnation.org>
4560 * Making Python wrapper files copy into place based on bundled
4561 versions for each active HepMC interface (2.3, 2.4 & 2.5), using a
4562 new HepMC version detector test in configure.
4564 * Adding YAML metadata files and parser, removing same metadata
4565 from the analysis classes' source headers.
4567 2009-07-07 Andy Buckley <andy@insectnation.org>
4569 * Adding Jet::hadronicEnergy()
4571 * Adding VisibleFinalState and automatically using it in JetAlg
4572 projections.
4574 * Adding YAML parser for new metadata (and eventually ref data)
4575 files.
4577 2009-07-02 Andy Buckley <andy@insectnation.org>
4579 * Adding Jet::neutralEnergy() (and Jet::totalEnergy() for
4580 convenience/symmetry).
4582 2009-06-25 Andy Buckley <andy@insectnation.org>
4584 * Tidying and small efficiency improvements in CDF_2008_S7541902
4585 W+jets analysis (remove unneeded second stage of jet storing,
4586 sorting the jets twice, using foreach, etc.).
4588 2009-06-24 Andy Buckley <andy@insectnation.org>
4590 * Fixing Jet's containsBottom and containsCharm methods, since B
4591 hadrons are not necessarily to be found in the final
4592 state. Discovered at the same time that HepMC::GenParticle defines
4593 a massively unhelpful copy constructor that actually loses the
4594 tree information; it would be better to hide it entirely!
4596 * Adding RivetHepMC.hh, which defines container-type accessors to
4597 HepMC particles and vertices, making it possible to use Boost
4598 foreach and hence avoiding the usual huge boilerplate for-loops.
4600 2009-06-11 Andy Buckley <andy@insectnation.org>
4602 * Adding --disable-pdfmanual option, to make the bootstrap a bit
4603 more robust.
4605 * Re-enabling D0IL in FastJets: adding 10^-10 to the pTmin removes
4606 the numerical instability!
4608 * Fixing CDF_2004 min/max cone analysis to use calo jets for the
4609 leading jet Et binning. Thanks to Markus Warsinsky
4610 for (re)discovering this bug: I was sure it had been fixed. I'm
4611 optimistic that this will fix the main distributions, although
4612 Swiss Cheese "minus 3" is still likely to be broken. Early tests
4613 look okay, but it'll take more stats before we can remove the "do
4614 not trust" sign.
4616 2009-06-10 Andy Buckley <andy@insectnation.org>
4618 * Providing "calc" methods so that Thrust and Sphericity
4619 projections can be used as calculators without having to use the
4620 projecting/caching system.
4622 2009-06-09 Andy Buckley <andy@insectnation.org>
4624 * 1.1.3 release!
4626 * More doc building and SWIG robustness tweaks.
4628 2009-06-07 Andy Buckley <andy@insectnation.org>
4630 * Make doc build from metadata work even before the library is
4631 installed.
4633 2009-06-07 Hendrik Hoeth <hendrik.hoeth@cern.ch>
4635 * Fix phi rotation in CDF_2008_LEADINGJETS.
4637 2009-06-07 Andy Buckley <andy@insectnation.org>
4639 * Disabling D0 IL midpoint cone (using CDF modpoint instead),
4640 since there seems to be a crashing bug in FastJet's
4641 implementation: we can't release that way, since ~no D0 analyses
4642 will run.
4644 2009-06-03 Andy Buckley <andy@insectnation.org>
4646 * Putting SWIG-generated source files under SVN control to make
4647 life easier for people who we advise to check out the SVN head
4648 version, but who don't have a sufficiently modern copy of SWIG to
4650 * Adding the --disable-analyses option, for people who just want
4651 to use Rivet as a framework for their own analyses.
4653 * Enabling HepMC cross-section reading, now that HepMC 2.5.0 has
4654 been released.
4656 2009-05-23 Hendrik Hoeth <hendrik.hoeth@cern.ch>
4658 * Using gsl-config to locate libgsl
4660 * Fix the paths for linking such that our own libraries are found
4661 before any system libraries, e.g. for the case that there is an
4662 outdated fastjet version installed on the system while we want to
4663 use our own up-to-date version.
4665 * Change dmerge to ymerge in the e+e- analyses using JADE or
4666 DURHAM from fastjet. That's what it is called in fastjet-2.4 now.
4668 2009-05-18 Andy Buckley <andy@insectnation.org>
4670 * Adding use of gsl-config in configure script.
4672 2009-05-16 Andy Buckley <andy@insectnation.org>
4674 * Removing argument to vetoEvent macro, since no weight
4675 subtraction is now needed. It's now just an annotated return, with
4676 built-in debug log message.
4678 * Adding an "open" FinalState, which is only calculated once per
4679 even, then used by all other FSes, avoiding the loop over
4680 non-status 1 particles.
4682 2009-05-15 Andy Buckley <andy@insectnation.org>
4684 * Removing incorrect setting of DPS x-errs in CDF_2008 jet shape
4685 analysis: the DPS autobooking already gets this bit right.
4687 * Using Jet rather than FastJet::PseudoJet where possible, as it
4688 means that the phi ranges match up nicely between Particle and the
4689 Jet object. The FastJet objects are only really needed if you want
4690 to do detailed things like look at split/merge scales for
4691 e.g. diff jet rates or "y-split" analyses.
4693 * Tidying and debugging CDF jet shape analyses and jet shape
4694 plugin... ongoing, but I think I've found at least one real bug,
4695 plus a lot of stuff that can be done a lot more nicely.
4697 * Fully removing deprecated math functions and updating affected
4698 analyses.
4700 2009-05-14 Andy Buckley <andy@insectnation.org>
4702 * Removing redundant rotation in DISKinematics... this was a
4703 legacy of Peter using theta rather than pi-theta in his rotation.
4705 * Adding convenience phi, rho, eta, theta, and perp,perp2 methods
4706 to the 3 and 4 vector classes.
4708 2009-05-12 Andy Buckley <andy@insectnation.org>
4710 * Adding event auto-rotation for events with one proton... more
4711 complete approach?
4713 2009-05-09 Hendrik Hoeth <hendrik.hoeth@cern.ch>
4715 * Renaming CDF_2008_NOTE_9337 to CDF_2009_S8233977.
4717 * Numerous small bug fixes in ALEPH_1996_S3486095.
4719 * Adding data for one of the Rick-Field-style STAR UE analyses.
4721 2009-05-08 Andy Buckley <andy@insectnation.org>
4723 * Adding rivet-mkanalysis script, to make generating new analysis
4724 source templates easier.
4726 2009-05-07 Andy Buckley <andy@insectnation.org>
4728 * Adding null vector check to Vector3::azimuthalAngle().
4730 * Fixing definition of HCM/Breit frames in DISKinematics, and
4731 adding asserts to check that the transformation is doing what it
4732 should.
4734 2009-05-05 Andy Buckley <andy@insectnation.org>
4736 * Removing eta and Et cuts from CDF 2000 Z pT analysis, based on
4737 our reading of the paper, and converting most of the analysis to a
4738 call of the ZFinder projection.
4740 2009-05-05 Hendrik Hoeth <hendrik.hoeth@cern.ch>
4742 * Support non-default seed_threshold in CDF cone jet algorithms.
4744 * New analyses STAR_2006_S6870392 and STAR_2008_S7993412. In
4745 STAR_2008_S7993412 only the first distribution is filled at the
4746 moment. STAR_2006_S6870392 is normalised to data instead of the
4747 Monte Carlo cross-section, since we don't have that available in
4748 the HepMC stream yet.
4750 2009-05-05 Andy Buckley <andy@insectnation.org>
4752 * Changing Event wrapper to copy whole GenEvents rather than
4753 pointers, use std units if supported in HepMC, and run a
4754 placeholder function for event auto-orientation.
4756 2009-04-28 Andy Buckley <andy@insectnation.org>
4758 * Removing inclusion of IsolationTools header by analyses that
4759 aren't actually using the isolation tools... which is all of
4760 them. Leaving the isolation tools in place for now, as there might
4761 still be use cases for them and there's quite a lot of code there
4762 that deserves a second chance to be used!
4764 2009-04-24 Andy Buckley <andy@insectnation.org>
4766 * Deleting Rivet implementations of TrackJet and D0ILConeJets: the
4767 code from these has now been incorporated into FastJet 2.4.0.
4769 * Removed all mentions of the FastJet JADE patch and the HAVE_JADE
4770 preprocessor macro.
4772 * Bug fix to D0_2008_S6879055 to ensure that cuts compare to both
4773 electron and positron momenta (was just comparing against
4774 electrons, twice, probably thanks to the miracle of cut and
4775 paste).
4777 * Converting all D0 IL Cone jets to use FastJets. Involved tidying
4778 D0_2004 jet azimuthal decorrelation analysis and D0_2008_S6879055
4779 as part of migration away from using the getLorentzJets method,
4780 and removing the D0ILConeJets header from quite a few analyses
4781 that weren't using it at all.
4783 * Updating CDF 2001 to use FastJets in place of TrackJet, and
4784 adding axis labels to its plots.
4786 * Note that ZEUS_2001_S4815815 uses the wrong jet definition: it
4787 should be a cone but curently uses kT.
4789 * Fixing CDF_2005_S6217184 to use correct (midpoint, R=0.7) jet
4790 definition. That this was using a kT definition with R=1.0 was
4791 only made obvious when the default FastJets constructor was
4792 removed.
4794 * Removing FastJets default constructor: since there are now
4795 several good (IRC safe) jet definitions available, there is no
4796 obvious safe default and analyses should have to specify which
4797 they use.
4799 * Moving FastJets constructors into implementation file to reduce
4800 recompilation dependencies, and adding new plugins.
4802 * Ensuring that axis labels actually get written to the output
4803 data file.
4805 2009-04-22 Andy Buckley <andy@insectnation.org>
4807 * Adding explicit FastJet CDF jet alg overlap_threshold
4808 constructor param values, since the default value from 2.3.x is
4809 now removed in version 2.4.0.
4811 * Removing use of HepMC ThreeVector::mag method (in one place
4812 only) since this has been removed in version 2.5.0b.
4814 * Fix to hepmc.i (included by rivet.i) to ignore new HepMC 2.5.0b
4815 GenEvent stream operator.
4817 2009-04-21 Andy Buckley <andy@insectnation.org>
4819 * Dependency on FastJet now requires version 2.4.0 or later. Jade
4820 algorithm is now native.
4822 * Moving all analysis constructors and Projection headers from the
4823 analysis header files into their .cc implementation files, cutting
4824 header dependencies.
4826 * Removing AIDA headers: now using LWH headers only, with
4827 enhancement to use axis labels. This facility is now used by the
4828 histo booking routines, and calling the booking function versions
4829 which don't specify axis labels will result in a runtime warning.
4831 2009-04-07 Andy Buckley <andy@insectnation.org>
4833 * Adding $(DESTDIR) prefix to call to Python module "setup.py
4834 install"
4836 * Moving HepMC SWIG mappings into Python Rivet module for now:
4837 seems to work-around the SL type-mapping bug.
4839 2009-04-03 Andy Buckley <andy@insectnation.org>
4841 * Adding MC analysis for LHC UE: higher-pT replica of Tevatron
4842 2008 leading jets study.
4844 * Adding CDF_1990 pseudorapidity analysis.
4846 * Moving CDF_2001 constructor into implementation file.
4848 * Cleaning up CDF_2008_LEADINGJETS a bit, e.g. using foreach
4849 loops.
4851 * Adding function interface for specifying axis labels in histo
4852 bookings. Currently has no effect, since AIDA doesn't seem to have
4853 a mechanism for axis labels. It really is a piece of crap.
4855 2009-03-18 Andy Buckley <andy@insectnation.org>
4857 * Adding docs "make upload" and other tweaks to make the doc files
4858 fit in with the Rivet website.
4860 * Improving LaTex docs to show email addresses in printable form
4861 and to group analyses by collider or other metadata.
4863 * Adding doc script to include run info in LaTeX docs, and to make
4864 HTML docs.
4866 * Removing WZandh projection, which wasn't generator independent
4867 and whose sole usage was already replaced by ZFinder.
4869 * Improvements to constructors of ZFinder and InvMassFS.
4871 * Changing ExampleTree to use real FS-based Z finding.
4873 2009-03-16 Andy Buckley <andy@insectnation.org>
4875 * Allow the -H histo file spec to give a full name if wanted. If
4876 it doesn't end in the desired extension, it will be added.
4878 * Adding --runname option (and API elements) to choose a run name
4879 to be prepended as a "top level directory" in histo paths. An
4880 empty value results in no extra TLD.
4882 2009-03-06 Andy Buckley <andy@insectnation.org>
4884 * Adding R=0.2 photon clustering to the electrons in the CDF 2000
4885 Z pT analysis.
4887 2009-03-04 Andy Buckley <andy@insectnation.org>
4889 * Fixing use of fastjet-config to not use the user's PATH
4890 variable.
4892 * Fixing SWIG type table for HepMC object interchange.
4894 2009-02-20 Andy Buckley <andy@insectnation.org>
4896 * Adding use of new metadata in command line analysis querying
4897 with the rivet command, and in building the PDF Rivet manual.
4899 * Adding extended metadata methods to the Analysis interface and
4900 the Python wrapper. All standard analyses comply with this new
4901 interface.
4903 2009-02-19 Andy Buckley <andy@insectnation.org>
4905 * Adding usefully-scoped config headers, a Rivet::version()
4906 function which uses them, and installing the generated headers to
4907 fix "external" builds against an installed copy of Rivet. The
4908 version() function has been added to the Python wrapper.
4910 2009-02-05 Andy Buckley <andy@insectnation.org>
4912 * Removing ROOT dependency and linking. Woo! There's no need for
4913 this now, because the front-end accepts no histo format switch and
4914 we'll just use aida2root for output conversions. Simpler this way,
4915 and it avoids about half of our compilation bug reports from 32/64
4916 bit ROOT build confusions.
4918 2009-02-04 Andy Buckley <andy@insectnation.org>
4920 * Adding automatic generation of LaTeX manual entries for the
4921 standard analyses.
4923 2009-01-20 Andy Buckley <andy@insectnation.org>
4925 * Removing RivetGun and TCLAP source files!
4927 2009-01-19 Andy Buckley <andy@insectnation.org>
4929 * Added psyco Python optimiser to rivet, make-plots and
4930 compare-histos.
4932 * bin/aida2root: Added "-" -> "_" mangling, following requests.
4934 2009-01-17 Andy Buckley <andy@insectnation.org>
4936 * 1.1.2 release.
4938 2009-01-15 Andy Buckley <andy@insectnation.org>
4940 * Converting Python build system to bundle SWIG output in tarball.
4942 2009-01-14 Andy Buckley <andy@insectnation.org>
4944 * Converting AIDA/LWH divide function to return a DPS so that bin
4945 width factors don't get all screwed up. Analyses adapted to use
4946 the new division operation (a DPS/DPS divide would also be
4947 nice... but can wait for YODA).
4949 2009-01-06 Andy Buckley <andy@insectnation.org>
4951 * bin/make-plots: Added --png option for making PNG output files,
4952 using 'convert' (after making a PDF --- it's a bit messy)
4954 * bin/make-plots: Added --eps option for output filtering through
4955 ps2eps.
4957 2009-01-05 Andy Buckley <andy@insectnation.org>
4959 * Python: reworking Python extension build to use distutils and
4960 newer m4 Python macros. Probably breaks distcheck but is otherwise
4961 more robust and platform independent (i.e. it should now work on
4962 Macs).
4964 2008-12-19 Andy Buckley <andy@insectnation.org>
4966 * make-plots: Multi-threaded make-plots and cleaned up the LaTeX
4967 building a bit (necessary to remove the implicit single global
4968 state).
4970 2008-12-18 Andy Buckley <andy@insectnation.org>
4972 * make-plots: Made LaTeX run in no-stop mode.
4974 * compare-histos: Updated to use a nicer labelling syntax on the
4975 command line and to successfully build MC-MC plots.
4977 2008-12-16 Andy Buckley <andy@insectnation.org>
4979 * Made LWH bin edge comparisons safe against numerical errors.
4981 * Added Particle comparison functions for sorting.
4983 * Removing most bad things from ExampleTree and tidying up. Marked
4984 WZandh projection for removal.
4986 2008-12-03 Hendrik Hoeth <hendrik.hoeth@cern.ch>
4988 * Added the two missing observables to the CDF_2008_NOTE_9337 analysis,
4989 i.e. track pT and sum(ET). There is a small difference between our MC
4990 output and the MC plots of the analysis' author, we're still waiting
4991 for the author's comments.
4993 2008-12-02 Andy Buckley <andy@insectnation.org>
4995 * Overloading use of a std::set in the interface, since the
4996 version of SWIG on Sci Linux doesn't have a predefined mapping for
4997 STL sets.
4999 2008-12-02 Hendrik Hoeth <hendrik.hoeth@cern.ch>
5001 * Fixed uemerge. The output was seriously broken by a single line
5002 of debug information in fillAbove(). Also changed uemerge output
5003 to exponential notation.
5005 * Unified ref and mc histos in compare-histos. Histos with one
5006 bin are plotted linear. Option for disabling the ratio plot.
5007 Several fixes for labels, legends, output directories, ...
5009 * Changed rivetgun's fallback directory for parameter files to
5010 $PREFIX/share/AGILe, since that's where the steering files now are.
5012 * Running aida2flat in split mode now produces make-plots compatible
5013 dat-files for direct plotting.
5015 2008-11-28 Andy Buckley <andy@insectnation.org>
5017 * Replaced binreloc with an upgraded and symbol-independent copy.
5019 2008-11-25 Andy Buckley <andy@insectnation.org>
5021 * Added searching of $RIVET_REF_PATH for AIDA reference data
5022 files.
5024 2008-11-24 Andy Buckley <andy@insectnation.org>
5026 * Removing "get"s and other obsfucated syntax from
5027 ProjectionApplier (Projection and Analysis) interfaces.
5029 2008-11-21 Andy Buckley <andy@insectnation.org>
5031 * Using new "global" Jet and V4 sorting functors in
5032 TrackJet. Looks like there was a sorting direction problem before...
5034 * Verbose mode with --list-analyses now shows descriptions as well
5035 as analysis names.
5037 * Moved data/Rivet to data/refdata and moved data/RivetGun
5038 contents to AGILe (since generator steering is no longer a Rivet
5039 thing)
5041 * Added unchecked ratio plots to D0 Run II jet + photon analysis.
5043 * Added D0 inclusive photon analysis.
5045 * Added D0 Z rapidity analysis.
5047 * Tidied up constructor interface and projection chain
5048 implementation of InvMassFinalState.
5050 * Added ~complete set of Jet and FourMomentum sorting functors.
5052 2008-11-20 Andy Buckley <andy@insectnation.org>
5054 * Added IdentifiedFinalState.
5056 * Moved a lot of TrackJet and Jet code into .cc files.
5058 * Fixed a caching bug in Jet: cache flag resets should never be
5059 conditional, since they are then sensitive to initialisation
5060 errors.
5062 * Added quark enum values to ParticleName.
5064 * Rationalised JetAlg interfaces somewhat, with "size()" and
5065 "jets()" methods in the interface.
5067 * Added D0 W charge asymmetry and D0 inclusive jets analyses.
5069 2008-11-18 Andy Buckley <andy@insectnation.org>
5071 * Adding D0 inclusive Z pT shape analysis.
5073 * Added D0 Z + jet pT and photon + jet pT spectrum analyses.
5075 * Lots of tidying up of particle, event, particle name etc.
5077 * Now the first event is used to detect the beam type and remove
5078 incompatible analyses.
5080 2008-11-17 Andy Buckley <andy@insectnation.org>
5082 * Added bash completion for rivetgun.
5084 * Starting to provide stand-alone call methods on projections so
5085 they can be used without the caching infrastructure. This could
5086 also be handy for unit testing.
5088 * Adding functionality (sorting function and built-in sorting
5089 schemes) to the JetAlg interface.
5091 2008-11-10 Hendrik Hoeth <hendrik.hoeth@cern.ch>
5093 * Fix floating point number output format in aida2flat and flat2aida
5095 * Added CDF_2002_S4796047: CDF Run-I charged multiplicity distribution
5097 * Renamed CDF_2008_MINBIAS to CDF_2008_NOTE_9337, since the
5098 note is publicly available now.
5100 2008-11-10 Hendrik Hoeth <hendrik.hoeth@cern.ch>
5102 * Added DELPHI_2003_WUD_03_11: Delphi 4-jet angular distributions.
5103 There is still a problem with the analysis, so don't use it yet.
5104 But I need to commit the code because my laptop is broken ...
5106 2008-11-06 Andy Buckley <andy@insectnation.org>
5108 * Code review: lots of tidying up of projections and analyses.
5110 * Fixes for compatibility with the LLVM C & C++ compiler.
5112 * Change of Particle interface to remove "get"-prefixed method
5113 names.
5115 2008-11-05 Andy Buckley <andy@insectnation.org>
5117 * Adding ability to query analysis metadata from the command line.
5119 * Example of a plugin analyis now in plugindemo, with a make check
5120 test to make sure that the plugin analysis is recognised by the
5121 command line "rivet" tool.
5123 * GCC 4.3 fix to mat-vec tests.
5125 2008-11-04 Andy Buckley <andy@insectnation.org>
5127 * Adding native logger control from Python interface.
5129 2008-11-03 Andy Buckley <andy@insectnation.org>
5131 * Adding bash_completion for rivet executable.
5133 2008-10-31 Andy Buckley <andy@insectnation.org>
5135 * Clean-up of histo titles and analysis code review.
5137 * Added momentum construction functions from FastJet PseudoJets.
5139 2008-10-28 Andy Buckley <andy@insectnation.org>
5141 * Auto-booking of histograms with a name, rather than the HepData
5142 ID 3-tuple is now possible.
5144 * Fix in CDF 2001 pT spectra to get the normalisations to depend
5145 on the pT_lead cutoff.
5147 2008-10-23 Andy Buckley <andy@insectnation.org>
5149 * rivet handles signals neatly, as for rivetgun, so that premature
5150 killing of the analysis process will still result in an analysis
5151 file.
5153 * rivet now accepts cross-section as a command line argument and,
5154 if it is missing and is required, will prompt the user for it
5155 interactively.
5157 2008-10-22 Andy Buckley <andy@insectnation.org>
5159 * rivet (Python interface) now can list analyses, check when
5160 adding analyses that the given names are valid, specify histo file
5161 name, and provide sensibly graded event number logging.
5163 2008-10-20 Andy Buckley <andy@insectnation.org>
5165 * Corrections to CDF 2004 analysis based on correspondance with
5166 Joey Huston. M bias dbns now use whole event within |eta| < 0.7,
5167 and Cheese plots aren't filled at all if there are insufficient
5168 jets (and the correct ETlead is used).
5170 2008-10-08 Andy Buckley <andy@insectnation.org>
5172 * Added AnalysisHandler::commitData() method, to allow the Python
5173 interface to write out a histo file without having to know
5174 anything about the histogramming API.
5176 * Reduced SWIG interface file to just map a subset of Analysis and
5177 AnalysisHandler functionality. This will be the basis for a new
5178 command line interface.
5180 2008-10-06 Andy Buckley <andy@insectnation.org>
5182 * Converted FastJets plugin to use a Boost shared_pointer to the
5183 cached ClusterSequence. The nullness of the pointer is now used to
5184 indicate an empty tracks (and hence jets) set. Once FastJet
5185 natively support empty CSeqs, we can rewrite this a bit more
5186 neatly and ditch the shared_ptr.
5188 2008-10-02 Andy Buckley <andy@insectnation.org>
5190 * The CDF_2004 (Acosta) data file now includes the full range of
5191 pT for the min bias data at both 630 and 1800 GeV. Previously,
5192 only the small low-pT insert plot had been entered into HepData.
5194 2008-09-30 Andy Buckley <andy@insectnation.org>
5196 * Lots of updates to CDF_2004 (Acosta) UE analysis, including
5197 sorting jets by E rather than Et, and factorising transverse cone
5198 code into a function so that it can be called with a random
5199 "leading jet" in min bias mode. Min bias histos are now being
5200 trial-filled just with tracks in the transverse cones, since the
5201 paper is very unclear on this.
5203 * Discovered a serious caching problem in FastJets projection when
5204 an empty tracks vector is passed from the
5205 FinalState. Unfortunately, FastJet provides no API way to solve
5206 the problem, so we'll have to report this upstream. For now, we're
5207 solving this for CDF_2004 by explicitly vetoing events with no
5208 tracks.
5210 * Added Doxygen to the build with target "dox"
5212 * Moved detection of whether cross-section information is needed
5213 into the AnalysisHandler, with dynamic computation by scanning
5214 contained analyses.
5216 * Improved robustness of event reading to detect properly when the
5217 input file is smaller than expected.
5219 2008-09-29 Hendrik Hoeth <hendrik.hoeth@cern.ch>
5221 * New analysis: CDF_2000_S4155203
5223 2008-09-23 Andy Buckley <andy@insectnation.org>
5225 * rivetgun can now be built and run without AGILe. Based on a
5226 patch by Frank Siegert.
5228 2008-09-23 Hendrik Hoeth <hendrik.hoeth@cern.ch>
5230 * Some preliminary numbers for the CDF_2008_LEADINGJETS analysis
5231 (only transverse region and not all observables. But all we have now.)
5233 2008-09-17 Andy Buckley <andy@insectnation.org>
5235 * Breaking up the mammoth "generate" function, to make Python
5236 mapping easier, among other reasons.
5238 * Added if-zero-return-zero checking to angle mapping functions,
5239 to avoid problems where 1e-19 gets mapped on to 2 pi and then
5240 fails boundary asserts.
5242 * Added HistoHandler singleton class, which will be a central
5243 repository for holding analyses' histogram objects to be accessed
5244 via a user-chosen name.
5246 2008-08-26 Andy Buckley <andy@insectnation.org>
5248 * Allowing rivet-config to return combined flags.
5250 2008-08-14 Andy Buckley <andy@insectnation.org>
5252 * Fixed some g++ 4.3 compilation bugs, including "vector" not
5253 being a valid name for a method which returns a physics vector,
5254 since it clashes with std::vector (which we globally import). Took
5255 the opportunity to rationalise the Jet interface a bit, since
5256 "particle" was used to mean "FourMomentum", and "Particle" types
5257 required a call to "getFullParticle". I removed the "gets" at the
5258 same time, as part of our gradual migration to a coherent naming
5259 policy.
5261 2008-08-11 Andy Buckley <andy@insectnation.org>
5263 * Tidying of FastJets and added new data files from HepData.
5265 2008-08-10 James Monk <jmonk@hep.ucl.ac.uk>
5267 * FastJets now uses user_index property of fastjet::PseudoJet to
5268 reconstruct PID information in jet contents.
5270 2008-08-07 Andy Buckley <andy@insectnation.org>
5272 * Reworking of param file and command line parsing. Tab characters
5273 are now handled by the parser, in a way equivalent to spaces.
5275 2008-08-06 Andy Buckley <andy@insectnation.org>
5277 * Added extra histos and filling to Acosta analysis - all HepData
5278 histos should now be filled, depending on sqrt{s}. Also trialling
5279 use of LaTeX math mode in titles.
5281 2008-08-05 Andy Buckley <andy@insectnation.org>
5283 * More data files for CDF analyses (2 x 2008, 1 x 1994), and moved
5284 the RivetGun AtlasPythia6.params file to more standard
5285 fpythia-atlas.params (and added to the install list).
5287 2008-08-04 Andy Buckley <andy@insectnation.org>
5289 * Reduced size of available options blocks in RivetGun help text
5290 by removing "~" negating variants (which are hardly ever used in
5291 practice) and restricting beam particles to
5292 PROTON, ANTIPROTON,ELECTRON and POSITRON.
5294 * Fixed Et sorting in Acosta analysis.
5296 2008-08-01 Andy Buckley <andy@insectnation.org>
5298 * Added AIDA headers to the install list, since
5299 external (plugin-type) analyses need them to be present for
5300 compilation to succeed.
5302 2008-07-29 Andy Buckley <andy@insectnation.org>
5304 * Fixed missing ROOT compile flags for libRivet.
5306 * Added command line repetition to logging.
5308 2008-07-29 Hendrik Hoeth <hendrik.hoeth@cern.ch>
5310 * Included the missing numbers and three more observables
5311 in the CDF_2008_NOTE_9351 analysis.
5313 2008-07-29 Andy Buckley <andy@insectnation.org>
5315 * Fixed wrong flags on rivet-config
5317 2008-07-28 Hendrik Hoeth <hendrik.hoeth@cern.ch>
5319 * Renamed CDF_2008_DRELLYAN to CDF_2008_NOTE_9351. Updated
5320 numbers and cuts to the final version of this CDF note.
5322 2008-07-28 Andy Buckley <andy@insectation.org>
5324 * Fixed polar angle calcuation to use atan2.
5326 * Added "mk" prefixes and x/setX convention to math classes.
5328 2008-07-28 Hendrik Hoeth <hendrik.hoeth@cern.ch>
5330 * Fixed definition of FourMomentum::pT (it had been returning pT2)
5332 2008-07-27 Andy Buckley <andy@insectnation.org>
5334 * Added better tests for Boost headers.
5336 * Added testing for -ansi, -pedantic and -Wall compiler flags.
5338 2008-07-25 Hendrik Hoeth <hendrik.hoeth@cern.ch>
5340 * updated DELPHI_2002_069_CONF_603 according to information
5341 from the author
5343 2008-07-17 Andy Buckley <andy@insectnation.org>
5345 * Improvements to aida2flat: now can produce one output file per
5346 histo, and there is a -g "gnuplot mode" which comments out the
5347 YODA/make_plot headers to make the format readable by gnuplot.
5349 * Import boost::assign namespace contents into the Rivet namespace
5350 --- provides very useful intuitive collection initialising
5351 functions.
5353 2008-07-15 Andy Buckley <andy.buckley@dur.ac.uk>
5355 * Fixed missing namespace in vector/matrix testing.
5357 * Removed Boost headers: now a system dependency.
5359 * Fixed polarRadius infinite loop.
5361 2008-07-09 Andy Buckley <andy@insectnation.org>
5363 * Fixed definitions of mapAngleMPiToPi, etc. and used them to fix
5364 the Jet::getPhi method.
5366 * Trialling use of "foreach" loop in CDF_2004: it works! Very nice.
5368 2008-07-08 Andy Buckley <andy@insectnation.org>
5370 * Removed accidental reference to an "FS" projection in
5371 FinalStateHCM's compare method. rivetgun -A now works again.
5373 * Added TASSO, SLD and D0_2008 reference data. The TASSO and SLD
5374 papers aren't installed or included in the tarball since there are
5375 currently no plans to implement these analyses.
5377 * Added Rivet namespacing to vector, matrix etc. classes. This
5378 required some re-writing and the opportunity was taken to move
5379 some canonical function definitions inside the classes and to
5380 improve the header structure of the Math area.
5382 2008-07-07 Andy Buckley <andy@insectnation.org>
5384 * Added Rivet namespace to Units.hh and Constants.hh.
5386 * Added Doxygen "@brief" flags to analyses.
5388 * Added "RIVET_" namespacing to all header guards.
5390 * Merged Giulio Lenzi's isolation/vetoing/invmass projections and
5391 D0 2008 analysis.
5393 2008-06-23 Jon Butterworth <J.Butterworth@ucl.ac.uk>
5395 * Modified FastJet to fix ysplit and split and filter.
5397 * Modified ExampleTree to show how to call them.
5399 2008-06-19 Hendrik Hoeth <hendrik.hoeth@cern.ch>
5401 * Added first version of the CDF_2008_DRELLYAN analysis described on
5402 http://www-cdf.fnal.gov/physics/new/qcd/abstracts/UEinDY_08.html
5403 There is a small difference between the analysis and this
5404 implementation, but it's too small to be visible.
5405 The fpythia-cdfdrellyan.params parameter file is for this analysis.
5407 * Added first version of the CDF_2008_MINBIAS analysis described on
5408 http://www-cdf.fnal.gov/physics/new/qcd/abstracts/minbias_08.html
5409 The .aida file is read from the plots on the web and will change.
5410 I'm still discussing some open questions about the analysis with
5411 the author.
5413 2008-06-18 Jon Butterworth <J.Butterworth@ucl.ac.uk>
5415 * Added First versions of splitJet and filterJet methods to
5416 fastjet.cc. Not yet tested, buyer beware.
5418 2008-06-18 Andy Buckley <andy@insectnation.org>
5420 * Added extra sorted Jets and Pseudojets methods to FastJets, and
5421 added ptmin argument to the JetAlg getJets() method, requiring a
5422 change to TrackJet.
5424 2008-06-13 Andy Buckley <andy@insectnation.org>
5426 * Fixed processing of "RG" parameters to ensure that invalid
5427 iterators are never used.
5429 2008-06-10 Andy Buckley <andy@insectnation.org>
5431 * Updated AIDA reference files, changing "/HepData" root path to
5432 "/REF". Still missing a couple of reference files due to upstream
5433 problems with the HepData records.
5435 2008-06-09 Andy Buckley <andy@insectnation.org>
5437 * rivetgun now handles termination signals (SIGTERM, SIGINT and
5438 SIGHUP) gracefully, finishing the event loop and finalising
5439 histograms. This means that histograms will always get written
5440 out, even if not all the requested events have been generated.
5442 2008-06-04 Hendrik Hoeth <hendrik.hoeth@cern.ch>
5444 * Added DELPHI_2002_069_CONF_603 analysis
5446 2008-05-30 Hendrik Hoeth <hendrik.hoeth@cern.ch>
5448 * Added InitialQuarks projection
5449 * Added OPAL_1998_S3780481 analysis
5451 2008-05-29 Andy Buckley <andy@insectnation.org>
5453 * distcheck compatibility fixes and autotools tweaks.
5455 2008-05-28 Andy Buckley <andy@insectnation.org>
5457 * Converted FastJet to use Boost smart_ptr for its plugin
5458 handling, to solve double-delete errors stemming from the heap
5459 cloning of projections.
5461 * Added (a subset of) Boost headers, particularly the smart
5462 pointers.
5464 2008-05-24 Andy Buckley <andy@insectnation.org>
5466 * Added autopackage spec files.
5468 * Merged these changes into the trunk.
5470 * Added a registerClonedProjection(...) method to
5471 ProjectionHandler: this is needed so that cloned projections will
5472 have valid pointer entries in the ProjectHandler repository.
5474 * Added clone() methods to all projections (need to use this,
5475 since the templated "new PROJ(proj)" approach to cloning can't
5476 handle object polymorphism.
5478 2008-05-19 Andy Buckley <andy@insectnation.org>
5480 * Moved projection-applying functions into ProjectionApplier base
5481 class (from which Projection and Analysis both derive).
5483 * Added Rivet-specific exceptions in place of std::runtime_error.
5485 * Removed unused HepML reference files.
5487 * Added error handling for requested analyses with wrong case
5488 convention / missing name.
5490 2008-05-15 Hendrik Hoeth <hendrik.hoeth@cern.ch>
5492 * New analysis PDG_Hadron_Multiplicities
5494 * flat2aida converter
5496 2008-05-15 Andy Buckley <andy@insectnation.org>
5498 * Removed unused mysterious Perl scripts!
5500 * Added RivetGun.HepMC logging of HepMC event details.
5502 2008-05-14 Hendrik Hoeth <hendrik.hoeth@cern.ch>
5504 * New analysis DELPHI_1995_S3137023. This analysis contains
5505 the xp spectra of Xi+- and Sigma(1385)+-.
5507 2008-05-13 Andy Buckley <andy@insectnation.org>
5509 * Improved logging interface: log levels are now integers (for
5510 cross-library compatibility and level setting also applies to
5511 existing loggers.
5513 2008-05-09 Andy Buckley <andy@insectnation.org>
5515 * Improvements to robustness of ROOT checks.
5517 * Added --version flag on config scripts and rivetgun.
5519 2008-05-06 Hendrik Hoeth <hendrik.hoeth@cern.ch>
5521 * New UnstableFinalState projection which selects all hadrons,
5522 leptons and real photons including unstable particles.
5524 * In the DELPHI_1996_S3430090 analysis the multiplicities for
5525 pi+/pi- and p0 are filled, using the UnstableFinalState projection.
5527 2008-05-06 Andy Buckley <andy@insectnation.org>
5529 * FastJets projection now protects against the case where no
5530 particles exist in the final state (where FastJet throws an
5531 exception).
5533 * AIDA file writing is now separated from the
5534 AnalysisHandler::finalize method... API users can choose what to
5535 do with the histo objects, be that writing out or further
5536 processing.
5538 2008-04-29 Andy Buckley <andy@insectnation.org>
5540 * Increased default tolerances in floating point comparisons as
5541 they were overly stringent and valid f.p. precision errors were
5542 being treated as significant.
5544 * Implemented remainder of Acosta UE analysis.
5546 * Added proper getEtSum() to Jet.
5548 * Added Et2() member and function to FourMomentum.
5550 * Added aida2flat conversion script.
5552 * Fixed ambiguity in TrackJet algorithm as to how the iteration
5553 continues when tracks are merged into jets in the inner loop.
5555 2008-04-28 Andy Buckley <andy@insectnation.org>
5557 * Merged in major "ProjectionHandler" branch. Projections are now
5558 all stored centrally in the singleton ProjectionHandler container,
5559 rather than as member pointers in projections and analyses. This
5560 also affects the applyProjection mechanism, which is now available
5561 as a templated method on Analysis and Projection. Still a few
5562 wrinkles need to be worked out.
5564 * The branch changes required a comprehensive review of all
5565 existing projections and analyses: lots of tidying up of these
5566 classes, as well as the auxiliary code like math utils, has taken
5567 place. Too much to list and track, unfortunately!
5569 2008-03-28 Andy Buckley <buckley@pc54.hep.ucl.ac.uk>
5571 * Started second CDF UE analysis ("Acosta"): histograms defined.
5573 * Fixed anomalous factor of 2 in LWH conversion from Profile1D
5574 to DataPointSet.
5576 * Added pT distribution histos to CDF 2001 UE analysis.
5578 2008-03-26 Andy Buckley <andy@insectnation.org>
5580 * Removed charged+neutral versions of histograms and projections
5581 from DELPHI analysis since they just duplicate the more robust
5582 charged-only measurements and aren't really of interest for
5583 tuning.
5585 2008-03-10 Andy Buckley <andy@insectnation.org>
5587 * Profile histograms now use error computation with proper
5588 weighting, as described here:
5589 http://en.wikipedia.org/wiki/Weighted_average
5591 2008-02-28 Andy Buckley <andy@insectnation.org>
5593 * Added --enable-jade flag for Professor studies with patched
5594 FastJet.
5596 * Minor fixes to LCG tag generator and gfilt m4 macros.
5598 * Fixed projection slicing issues with Field UE analysis.
5600 * Added Analysis::vetoEvent(e) function, which keeps track of the
5601 correction to the sum of weights due to event vetoing in analysis
5602 classes.
5604 2008-02-26 Andy Buckley <andy@insectnation.org>
5606 * Vector<N> and derived classes now initialise to have zeroed
5607 components when the no-arg constructor is used.
5609 * Added Analysis::scale() function to scale 1D
5610 histograms. Analysis::normalize() uses it internally, and the
5611 DELPHI (A)EEC, whose histo weights are not pure event weights, and
5612 normalised using scale(h, 1/sumEventWeights).
5614 2008-02-21 Hendrik Hoeth <hendrik.hoeth@cern.ch>
5616 * Added EEC and AEEC to the DELPHI_1996_S3430090 analysis. The
5617 normalisation of these histograms is still broken (ticket #163).
5619 2008-02-19 Hendrik Hoeth <hendrik.hoeth@cern.ch>
5621 * Many fixes to the DELPHI_1996_S3430090 analysis: bugfix in the
5622 calulation of eigenvalues/eigenvectors in MatrixDiag.hh for the
5623 sphericity, rewrite of Thrust/Major/Minor, fixed scaled momentum,
5624 hemisphere masses, normalisation in single particle events,
5625 final state slicing problems in the projections for Thrust,
5626 Sphericity and Hemispheres.
5628 2008-02-08 Andy Buckley <andy@insectnation.org>
5630 * Applied fixes and extensions to DIS classes, based on
5631 submissions by Dan Traynor.
5633 2008-02-06 Andy Buckley <andy@insectnation.org>
5635 * Made projection pointers used for cut combining into const
5636 pointers. Required some redefinition of the Projection* comparison
5637 operator.
5639 * Temporarily added FinalState member to ChargedFinalState to stop
5640 projection lifetime crash.
5642 2008-02-01 Andy Buckley <andy@insectnation.org>
5644 * Fixed another misplaced factor of bin width in the
5645 Analysis::normalize() method.
5647 2008-01-30 Andy Buckley <andy@insectnation.org>
5649 * Fixed the conversion of IHistogram1D to DPS, both via the
5650 explicit Analysis::normalize() method and the implicit
5651 AnalysisHandler::treeNormalize() route. The root of the problem is
5652 the AIDA choice of the word "height" to represent the sum of
5653 weights in a bin: i.e. the bin width is not taken into account
5654 either in computing bin height or error.
5656 2008-01-22 Andy Buckley <andy@insectnation.org>
5658 * Beam projection now uses HepMC GenEvent::beam_particles() method
5659 to get the beam particles. This is more portable and robust for
5660 C++ generators, and equivalent to the existing "first two" method
5661 for Fortran generators.
5663 2008-01-17 Andy Buckley <andy@insectnation.org>
5665 * Added angle range fix to pseudorapidity function (thanks to
5666 Piergiulio Lenzi).
5668 2008-01-10 Andy Buckley <andy@insectnation.org>
5670 * Changed autobooking plot codes to use zero-padding (gets the
5671 order right in JAS, file browser, ROOT etc.). Also changed the
5672 'ds' part to 'd' for consistency. HepData's AIDA output has been
5673 correspondingly updated, as have the bundled data files.
5675 2008-01-04 Andy Buckley <andy@insectnation.org>
5677 * Tidied up JetShape projection a bit, including making the
5678 constructor params const references. This seems to have sorted the
5679 runtime segfault in the CDF_2005 analysis.
5681 * Added caching of the analysis bin edges from the AIDA file -
5682 each analysis object will now only read its reference file once,
5683 which massively speeds up the rivetgun startup time for analyses
5684 with large numbhers of autobooked histos (e.g. the
5685 DELPHI_1996_S3430090 analysis).
5687 2008-01-02 Andy Buckley <andy@insectnation.org>
5689 * CDF_2001_S4751469 now uses the LossyFinalState projection, with
5690 an 8% loss rate.
5692 * Added LossyFinalState and HadronicFinalState, and fixed a
5693 "polarity" bug in the charged final state projection (it was
5694 keeping only the *uncharged* particles).
5696 * Now using isatty(1) to determine whether or not color escapes
5697 can be used. Also removed --color argument, since it can't have an
5698 effect (TCLAP doesn't do position-based flag toggling).
5700 * Made Python extension build optional (and disabled by default).
5702 2008-01-01 Andy Buckley <andy@insectnation.org>
5704 * Removed some unwanted DEBUG statements, and lowered the level of
5705 some infrastructure DEBUGs to TRACE level.
5707 * Added bash color escapes to the logger system.
5709 2007-12-21 Leif Lonnblad <Leif.Lonnblad@thep.lu.se>
5711 * include/LWH/ManagedObject.h: Fixed infinite loop in
5712 encodeForXML cf. ticket #135.
5714 2007-12-20 Andy Buckley <andy@insectnation.org>
5716 * Removed HepPID, HepPDT and Boost dependencies.
5718 * Fixed XML entity encoding in LWH. Updated CDF_2007_S7057202
5719 analysis to not do its own XML encoding of titles.
5721 2007-12-19 Andy Buckley <andy@insectnation.org>
5723 * Changed units header to set GeV = 1 (HepMC convention) and using
5724 units in CDF UE analysis.
5726 2007-12-15 Andy Buckley <andy@insectnation.org>
5728 * Introduced analysis metadata methods for all analyses (and made
5729 them part of the Analysis interface).
5731 2007-12-11 Andy Buckley <andy@insectnation.org>
5733 * Added JetAlg base projection for TrackJet, FastJet etc.
5735 2007-12-06 Andy Buckley <andy@insectnation.org>
5737 * Added checking for Boost library, and the standard Boost test
5738 program for shared_ptr.
5740 * Got basic Python interface running - required some tweaking
5741 since Python and Rivet's uses of dlopen collide (another
5742 RTLD_GLOBAL issue - see
5743 http://muttley.hates-software.com/2006/01/25/c37456e6.html )
5745 2007-12-05 Andy Buckley <andy@insectnation.org>
5747 * Replaced all use of KtJets projection with FastJets
5748 projection. KtJets projection disabled but left undeleted for
5749 now. CLHEP and KtJet libraries removed from configure searches and
5750 Makefile flags.
5752 2007-12-04 Andy Buckley <andy@insectnation.org>
5754 * Param file loading now falls back to the share/RivetGun
5755 directory if a local file can't be found and the provided name has
5756 no directory separators in it.
5758 * Converted TrackJet projection to update the jet centroid with
5759 each particle added, using pT weighting in the eta and phi
5760 averaging.
5762 2007-12-03 Andy Buckley <andy@insectnation.org>
5764 * Merged all command line handling functions into one large parse
5765 function, since only one executable now needs them. This removes a
5766 few awkward memory leaks.
5768 * Removed rivet executable - HepMC file reading functionality will
5769 move into rivetgun.
5771 * Now using HepMC IO_GenEvent format (IO_Ascii and
5772 IO_ExtendedAscii are deprecated). Now requires HepMC >= 2.3.0.
5774 * Added forward declarations of GSL diagonalisation routines,
5775 eliminating need for GSL headers to be installed on build machine.
5777 2007-11-27 Andy Buckley <andy@insectnation.org>
5779 * Removed charge differentiation from Multiplicity projection (use
5780 CFS proj) and updated ExampleAnalysis to produce more useful numbers.
5782 * Introduced binreloc for runtime path determination.
5784 * Fixed several bugs in FinalState, ChargedFinalState, TrackJet
5785 and Field analysis.
5787 * Completed move to new analysis naming scheme.
5789 2007-11-26 Andy Buckley <andy@insectnation.org>
5791 * Removed conditional HAVE_FASTJET bits: FastJet is now compulsory.
5793 * Merging appropriate RivetGun parts into Rivet. RivetGun currently broken.
5795 2007-11-23 Andy Buckley <andy@insectnation.org>
5797 * Renaming analyses to Spires-ID scheme: currently of form
5798 S<SpiresID>, to become <Expt>_<YYYY>_<SpiresID>.
5800 2007-11-20 Andy Buckley <andy@insectnation.org>
5802 * Merged replacement vectors, matrices and boosts into trunk.
5804 2007-11-15 Leif Lonnblad <Leif.Lonnblad@thep.lu.se>
5806 * src/Analysis.cc, include/Rivet/Analysis.hh: Introduced normalize
5807 function. See ticket #126.
5809 2007-10-31 Andy Buckley <andy@insectnation.org>
5811 * Tagging as 1.0b2 for HERA-LHC meeting.
5814 2007-10-25 Andy Buckley <andy@insectnation.org>
5816 * Added AxesDefinition base interface to Sphericity and Thrust,
5817 used by Hemispheres.
5819 * Exposed BinaryCut class, improved its interface and fixed a few
5820 bugs. It's now used by VetoedFinalState for momentum cuts.
5822 * Removed extra output from autobooking AIDA reader.
5824 * Added automatic DPS booking.
5826 2007-10-12 Andy Buckley <andy@insectnation.org>
5828 * Improved a few features of the build system
5830 2007-10-09 James Monk
5832 * Fixed dylib dlopen on Mac OS X.
5834 2007-10-05 Andy Buckley <andy@insectnation.org>
5836 * Added new reference files.
5839 2007-10-03 Andy Buckley <andy@insectnation.org>
5841 * Fixed bug in configure.ac which led to explicit CXX setting
5842 being ignored.
5844 * Including Logging.hh in Projection.hh, hence new transitive
5845 dependency on Logging.hh being installed. Since this is the normal
5846 behaviour, I don't think this is a problem.
5848 * Fixed segfaulting bug due to use of addProjection() in
5849 locally-scoped contained projections. This isn't a proper fix,
5850 since the whole framework should be designed to avoid the
5851 possibility of bugs like this.
5853 * Added newly built HepML and AIDA reference files for current
5854 analyses.
5856 2007-10-02 Andy Buckley <andy@insectnation.org>
5858 * Fixed possible null-pointer dereference in Particle copy
5859 constructor and copy assignment: this removes one of two blocker
5860 segfaults, the other of which is related to the copy-assignment of
5861 the TotalVisMomentum projection in the ExampleTree analysis.
5863 2007-10-01 Andy Buckley <andy@insectnation.org>
5865 * Fixed portable path to Rivet share directory.
5867 2007-09-28 Andy Buckley <andy@insectnation.org>
5869 * Added more functionality to the rivet-config script: now has
5870 libdir, includedir, cppflags, ldflags and ldlibs options.
5872 2007-09-26 Andy Buckley <andy@insectnation.org>
5874 * Added the analysis library closer function to the
5875 AnalysisHandler finalize() method, and also moved the analysis
5876 delete loop into AnalysisHandler::finalize() so as not to try
5877 deleting objects whose libraries have already closed.
5879 * Replaced the RivetPaths.cc.in method for portable paths with
5880 something using -D defines - much simpler!
5882 2007-09-21 Lars Sonnenschein <sonne@mail.cern.ch>
5884 * Added HepEx0505013 analysis and JetShape projection (some fixes
5885 by AB.)
5887 * Added GetLorentzJets member function to D0 RunII cone jet projection
5889 2007-09-21 Andy Buckley <andy@insectnation.org>
5891 * Fixed lots if bugs and bad practice in HepEx0505013 (to make it
5892 compile-able!)
5894 * Downclassed the log messages from the Test analysis to DEBUG
5895 level.
5897 * Added isEmpty() method to final state projection.
5899 * Added testing for empty final state and useful debug log
5900 messages to sphericity projection.
5902 2007-09-20 Andy Buckley <andy@insectnation.org>
5904 * Added Hemispheres projection, which calculates event hemisphere
5905 masses and broadenings.
5907 2007-09-19 Andy Buckley <andy@insectnation.org>
5909 * Added an explicit copy assignment operator to Particle: the
5910 absence of one of these was responsible for the double-delete
5911 error.
5913 * Added a "fuzzy equals" utility function for float/double types
5914 to Utils.hh (which already contains a variety of handy little
5915 functions).
5917 * Removed deprecated Beam::operator().
5919 * Added ChargedFinalState projection and de-pointered the
5920 contained FinalState projection in VetoedFinalState.
5922 2007-09-18 Andy Buckley <andy@insectnation.org>
5924 * Major bug fixes to the regularised version of the sphericity
5925 projection (and hence the Parisi tensor projection). Don't trust
5926 C & D param results from any previous version!
5928 * Added extra methods to thrust and sphericity projections to get
5929 the oblateness and the sphericity basis (currently returns dummy
5930 axes since I can't yet work out how to get the similarity
5931 transform eigenvectors from CLHEP)
5933 2007-09-14 Andy Buckley <andy@insectnation.org>
5935 * Merged in a branch of pluggable analysis mechanisms.
5937 2007-06-25 Jon Butterworth <jmb@hep.ucl.ac.uk>
5939 * Fixed some bugs in the root output for DataPoint.h
5941 2007-06-25 Andy Buckley <andy@insectnation.org>
5943 * include/Rivet/**/Makefile.am: No longer installing headers for
5944 "internal" functionality.
5946 * include/Rivet/Projections/*.hh: Removed the private restrictions
5947 on copy-assignment operators.
5949 2007-06-18 Leif Lonnblad <Leif.Lonnblad@thep.lu.se>
5951 * include/LWH/Tree.h: Fixed minor bug in listObjectNames.
5953 * include/LWH/DataPointSet.h: Fixed setCoordinate functions so
5954 that they resize the vector of DataPoints if it initially was
5955 empty.
5957 * include/LWH/DataPoint.h: Added constructor taking a vector of
5958 measuremts.
5960 2007-06-16 Leif Lonnblad <Leif.Lonnblad@thep.lu.se>
5962 * include/LWH/Tree.h: Implemented the listObjectNames and ls
5963 functions.
5965 * include/Rivet/Projections/FinalStateHCM.hh,
5966 include/Rivet/Projections/VetoedFinalState.hh: removed
5967 _theParticles and corresponding access function. Use base class
5968 variable instead.
5970 * include/Rivet/Projections/FinalState.hh: Made _theParticles
5971 protected.
5973 2007-06-13 Leif Lonnblad <Leif.Lonnblad@thep.lu.se>
5975 * src/Projections/FinalStateHCM.cc,
5976 src/Projections/DISKinematics.cc: Equality checks using
5977 GenParticle::operator== changed to check for pointer equality.
5979 * include/Rivet/Analysis/HepEx9506012.hh: Uses modified DISLepton
5980 projection.
5982 * include/Rivet/Particle.hh: Added member function to check if a
5983 GenParticle is associated.
5985 * include/Rivet/Projections/DISLepton.hh,
5986 src/Projections/DISLepton.cc: Fixed bug in projection. Introduced
5987 final state projection to limit searching for scattered
5988 lepton. Still not properly tested.
5990 2007-06-08 Leif Lonnblad <Leif.Lonnblad@thep.lu.se>
5992 * include/Rivet/Projections/PVertex.hh,
5993 src/Projections/PVertex.cc: Fixed the projection to simply get the
5994 signal_process_vertex from the GenEvent. This is the way it should
5995 work. If the GenEvent does not have a signal_process_vertex
5996 properly set up in this way, the problem is with the class that
5997 fills the GenEvent.
5999 2007-06-06 Jon Butterworth <jmb@hep.ucl.ac.uk>
6001 * Merged TotalVisibleMomentum and CalMET
6002 * Added pT ranges to Vetoed final state projection
6004 2007-05-27 Jon Butterworth <jmb@hep.ucl.ac.uk>
6006 * Fixed initialization of VetoedFinalStateProjection in ExampleTree
6008 2007-05-27 Leif Lonnblad <Leif.Lonnblad@thep.lu.se>
6010 * include/Rivet/Projections/KtJets.*: Make sure the KtEvent is
6011 deleted properly.
6013 2007-05-26 Jon Butterworth <jmb@hep.ucl.ac.uk>
6015 * Added leptons to the ExampleTree.
6016 * Added TotalVisibleEnergy projection, and added output to ExampleTree.
6018 2007-05-25 Jon Butterworth <jmb@hep.ucl.ac.uk>
6020 * Added a charged lepton projection
6022 2007-05-23 Andy Buckley <andy@insectnation.org>
6024 * src/Analysis/HepEx0409040.cc: Changed range of the histograms to
6025 the "pi" range rather than the "128" range.
6027 * src/Analysis/Analysis.cc: Fixed a bug in the AIDA path building.
6028 Histogram auto-booking now works.
6030 2007-05-23 Leif Lonnblad <Leif.Lonnblad@thep.lu.se>
6032 * src/Analysis/HepEx9506012.cc: Now uses the histogram booking
6033 function in the Analysis class.
6035 2007-05-23 Jon Butterworth <jmb@hep.ucl.ac.uk>
6037 * Fixed bug in PRD65092002 (was failing on zero jets)
6039 2007-05-23 Andy Buckley <andy@insectnation.org>
6041 * Added (but haven't properly tested) a VetoedFinalState projection.
6043 * Added normalize() method for AIDA 1D histograms.
6045 * Added configure checking for Mac OS X version, and setting the
6046 development target flag accordingly.
6048 2007-05-22 Andy Buckley <andy@insectnation.org>
6050 * Added an ostream method for AnalysisName enums.
6052 * Converted Analyses and Projections to use projection lists, cuts
6053 and beam constraints.
6055 * Added beam pair combining to the BeamPair sets of Projections
6056 by finding set meta-intersections.
6058 * Added methods to Cuts, Analysis and Projection to make Cut
6059 definition easier.
6061 * Fixed default fall-through in cut handling switch statement and
6062 now using -numeric_limits<double>::max() rather than min()
6064 * Added more control of logging presentation via static flag
6065 methods on Log.
6067 2007-05-13 Andy Buckley <andy@insectnation.org>
6069 * Added self-consistency checking mechanisms for Cuts and Beam
6071 * Re-implemented the cut-handling part of RivetInfo as a Cuts class.
6073 * Changed names of Analysis and Projection name() and handler()
6074 methods to getName() and getHandler() to be more consistent with
6075 the rest of the public method names in those classes.
6077 2007-05-02 Andy Buckley <andy@insectnation.org>
6079 * Added auto-booking of histogram bins from AIDA XML files. The
6080 AIDA files are located via a C++ function which is generated from
6081 RivetPaths.cc.in by running configure.
6084 2007-04-18 Andy Buckley <andy@insectnation.org>
6086 * Added a preliminary version of the Rick Field UE analysis, under
6087 the name PRD65092002.
6089 2007-04-19 Leif Lonnblad <Leif.Lonnblad@thep.lu.se>
6091 * src/Analysis/HepEx0409040.cc: The reason this did not compile
6092 under gcc-4 is that some iterators into a vector were wrongly
6093 assued to be pointers and were initialized to 0 and later compared
6094 to 0. I've changed this to initialize to end() of the
6095 corresponding vector and to compare with the same end() later.
6097 2007-04-05 Andy Buckley <andy@insectnation.org>
6099 * Lots of name changes in anticipation of the MCNet
6100 school. RivetHandler is now AnalysisHandler (since that's what it
6101 does!), BeamParticle has become ParticleName, and RivetInfo has
6102 been split into Cut and BeamConstraint portions.
6104 * Added BeamConstraint mechanism, which can be used to determine
6105 if an analysis is compatible with the beams being used in the
6106 generator. The ParticleName includes an "ANY" wildcard for this
6107 purpose.
6109 2006-03-19 Andy Buckley <andy@insectnation.org>
6111 * Added "rivet" executable which can read in HepMC ASCII dump
6112 files and apply Rivet analyses on the events.
6114 2007-02-24 Leif Lonnblad <Leif.Lonnblad@thep.lu.se>
6116 * src/Projections/KtJets.cc: Added comparison of member variables
6117 in compare() function
6119 * all: Merged changes from polymorphic-projections branch into
6120 trunk
6122 2007-02-17 Leif Lonnblad <Leif.Lonnblad@thep.lu.se>
6124 * all: projections and analysis handlers: All projections which
6125 uses other projctions now has a pointer rather than a copy of
6126 those projections to allow for polymorphism. The constructors has
6127 also been changed to require the used projections themselves,
6128 rather than the arguments needed to construct them.
6130 2007-02-17 Leif Lonnblad <Leif.Lonnblad@thep.lu.se>
6132 * src/Projections/FinalState.cc,
6133 include/Rivet/Projections/FinalState.icc (Rivet),
6134 include/Rivet/Projections/FinalState.hh: Added cut in transverse
6135 momentum on the particles to be included in the final state.
6137 2007-02-06 Leif Lonnblad <Leif.Lonnblad@thep.lu.se>
6139 * include/LWH/HistogramFactory.h: Fixed divide-by-zero in divide
6140 function. Also fixed bug in error calculation in divide
6141 function. Introduced checkBin function to make sure two histograms
6142 are equal even if they have variable bin widths.
6144 * include/LWH/Histogram1D.h: In normalize(double), do not do anything
6145 if the sum of the bins are zero to avoid dividing by zero.
6147 2007-01-20 Leif Lonnblad <Leif.Lonnblad@thep.lu.se>
6149 * src/Test/testLWH.cc: Modified to output files using the Tree.
6151 * configure.ac: Removed AC_CONFIG_AUX_DIR([include/Rivet/Config])
6152 since the directory does not exist anymore.
6154 2006-12-21 Andy Buckley <andy@insectnation.org>
6156 * Rivet will now conditionally install the AIDA and LWH headers if
6157 it can't find them when configure'ing.
6159 * Started integrating Leif's LWH package to fulfill the AIDA
6160 duties.
6162 * Replaced multitude of CLHEP wrapper headers with a single
6163 RivetCLHEP.h header.
6165 2006-11-20 Andy Buckley <andy@insectnation.org>
6167 * Introduced log4cpp logging.
6169 * Added analysis enum, which can be used as input to an analysis
6170 factory by Rivet users.
6172 2006-11-02 Andy Buckley <andy@insectnation.org>
6174 * Yet more, almost pointless, administrative moving around of
6175 things with the intention of making the structure a bit
6176 better-defined:
6178 * The RivetInfo and RivetHandler classes have been
6179 moved from src/Analysis into src as they are really the main Rivet
6180 interface classes. The Rivet.h header has also been moved into the
6181 "header root".
6183 * The build of a single shared library in lib has been disabled,
6184 with the library being built instead in src.
6186 2006-10-14 Andy Buckley <andy@insectnation.org>
6188 * Introduced a minimal subset of the Sherpa math tools, such as
6189 Vector{3,4}D, Matrix, etc. The intention is to eventually cut the
6190 dependency on CLHEP.
6192 2006-07-28 Andy Buckley <andy@insectnation.org>
6194 * Moving things around: all sources now in directories under src
6196 2006-06-04 Leif Lonnblad <Leif.Lonnblad@thep.lu.se>
6198 * Analysis/Examples/HZ95108.*: Now uses CentralEtHCM. Also set GeV
6199 units on the relevant histograms.
6201 * Projections/CentralEtHCM.*: Making a special class just to get
6202 out one number - the summed Et in the central rapidity bin - may
6203 seem like an overkill. But in case some one else might nees it...
6205 2006-06-03 Leif Lonnblad <Leif.Lonnblad@thep.lu.se>
6207 * Analysis/Examples/HZ95108.*: Added the hz95108 energy flow
6208 analysis from HZtool.
6210 * Projections/DISLepton.*: Since many HERA measurements do not
6211 care if we have electron or positron beam, it is now possible to
6212 specify lepton or anti-lepton.
6214 * Projections/Event.*: Added member and access function for the
6215 weight of an event (taken from the GenEvent object.weights()[0].
6217 * Analysis/RivetHandler.*: Now depends explicitly on the AIDA
6218 interface. An AIDA analysis factory must be specified in the
6219 constructor, where a tree and histogram factory is automatically
6220 created. Added access functions to the relevant AIDA objects.
6222 * Analysis/AnalysisBase.*: Added access to the RivetHandler and
6223 its AIDA factories.
6225 2005-12-27 Leif Lonnblad <Leif.Lonnblad@thep.lu.se>
6227 * configure.ac: Added -I$THEPEGPATH/include to AM_CPPFLAGS.
6229 * Config/Rivet.h: Added some std incudes and using std::
6230 declaration.
6232 * Analysis/RivetInfo.*: Fixed some bugs. The RivetInfo facility
6233 now works, although it has not been thoroughly tested.
6235 * Analysis/Examples/TestMultiplicity.*: Re-introduced
6236 FinalStateHCM for testing purposes but commented it away again.
6238 * .: Made a number of changes to implement handling of RivetInfo
6239 objects.